Spoof surface plasmon

Spoof surface plasmons, also known as spoof surface plasmon polaritons, are surface electromagnetic waves in microwave and terahertz regimes that propagate along planar interfaces with sign-changing permittivities. Spoof surface plasmons are a type of surface plasmon polariton, which ordinarily propagate along metal and dielectric interfaces in infrared and visible frequencies. Since surface plasmon polaritons cannot exist naturally in microwave and terahertz frequencies due to dispersion properties of metals, spoof surface plasmons necessitate the use of artificially-engineered metamaterials.

Spoof surface plasmons share the natural properties of surface plasmon polaritons, such as dispersion characteristics and subwavelength field confinement. They were first theorized by John Pendry et al.[1]

Theory

SPP oscillation in between a metal-dielectric interface

Surface plasmon polaritons (SPP) result from the coupling of delocalized electron oscillations ("surface plasmon") to electromagnetic waves ("polariton"). SPPs propagate along the interface between a positive- and a negative-permittivity material. These waves decay perpendicularly from the interface ("evanescent field"). For a plasmonic medium that is stratified along the z-direction in Cartesian coordinates, dispersion relation for SPPs can be obtained from solving Maxwell's equations:[2]

where

  • is the wave vector that is parallel to the interface. It is in the direction of propagation.
  • is the angular frequency.
  • is the speed of light.
  • and are the permittivies for metal and the dielectric.

Per this relation, SPPs have shorter wavelengths than light in free space for a frequency band below surface plasmon frequency; this property, as well as subwavelength confinement, enables new applications in subwavelength optics and systems beyond the diffraction-limit.[2] Nevertheless, for lower frequency bands such as microwave and terahertz, surface plasmon polariton modes are not supported; metals function approximately as perfect electrical conductors with imaginary dielectric functions in this regime.[3] Per the effective medium approach, metal surfaces with subwavelength structural elements can mimic the plasma behaviour, resulting in artificial surface plasmon polariton excitations with similar dispersion behaviour.[3][4][5]

Methods and applications

The use of subwavelength structures to induce low-frequency plasmonic excitations was first theorized by John Pendry et al. in 1996; Pendry proposed that a periodic lattice of thin metallic wires with a radius of 1 μm could be used to support surface-bound modes, with a plasma cut-off frequency of 8.2 GHz.[3] In 2004, Pendry et al. extended the approach to metal surfaces that are perforated by holes, terming the artificial SPP excitations as "spoof surface plasmons."[4][5]

In 2006, terahertz pulse propagation in planar metallic structures with holes were shown via FDTD simulations.[7] Martin-Cano et al. has realized the spatial and temporal modulation of guided terahertz modes via metallic parallelepiped structures, which they termed as "domino plasmons."[8] Designer spoof plasmonic structures were also tailored to improve the performance of terahertz quantum cascade lasers in 2010.[9]

Spoof surface plasmons were proposed as a possible solution for decreasing the crosstalk in microwave integrated circuits, transmission lines and waveguides.[1] In 2013, Ma et al. demonstrated a matched conversion from coplanar waveguide with a characteristic impedance of 50Ω to a spoof-plasmonic structure.[10] In 2014, integration of commercial low-noise amplifier with spoof plasmonic structures was realized; the system reportedly worked from 6 to 20 GHz with a gain around 20 dB.[11] Kianinejad et al. also reported the design of a slow-wave spoof-plasmonic transmission line; conversion from quasi-TEM microstrip modes to TM spoof plasmon modes were also demonstrated.[12]

Khanikaev et al. reported nonreciprocal spoof surface plasmon modes in structured conductor embedded in an asymmetric magneto-optical medium, which results in one-way transmission.[13] Pan et al. observed the rejection of certain spoof plasmon modes with an introduction of electrically resonant metamaterial particles to the spoof plasmonic strip.[14] Localized spoof surface plasmons were also demonstrated for metallic disks in microwave frequencies.[15][16]

See also

References

  1. Tang, Wen Xuan; Zhang, Hao Chi; Ma, Hui Feng; Jiang, Wei Xiang; et al. (4 January 2019). "Concept, Theory, Design, and Applications of Spoof Surface Plasmon Polaritons at Microwave Frequencies". Advanced Optical Materials. 7 (1): 1800421. doi:10.1002/adom.201800421.
  2. Maier, Stefan A. (2007). Plasmonics: Fundamentals and Applications. New York: Springer Publishing. ISBN 978-0-387-33150-8.
  3. Pendry, J. B.; Holden, A. J.; Stewart, W. J.; Youngs, I. (June 1996). "Extremely Low Frequency Plasmons in Metallic Mesostructures". Physical Review Letters. 46 (25): 4773. doi:10.1103/PhysRevLett.76.4773.
  4. Pendry, J. B.; Martín-Moreno, L.; Garcia-Vidal, F. J. (6 August 2004). "Mimicking Surface Plasmons with Structured Surfaces". Science. 305 (5685): 847–848. doi:10.1126/science.1098999.
  5. Garcia-Vidal, F. J.; Martín-Moreno, L.; Pendry, J. B. (January 2005). "Surfaces with holes in them: new plasmonic metamaterials". Journal of Optics A. 7: S97–S101. doi:10.1088/1464-4258/7/2/013.
  6. Liu, Xiaoyong; Feng, Yijun; Zhu, Bo; Zhao, Junming; Jiang, Tian (February 2016). "Backward spoof surface wave in plasmonic metamaterial of ultrathin metallic structure". Scientific Reports. 6 (6): 20448. doi:10.1038/srep20448.
  7. Maier, Stefan A.; Andrews, Steve R. (June 2006). "Terahertz pulse propagation using plasmon-polariton-like surface modes on structured conductive surfaces". Applied Physics Letters. 88: 251120. doi:10.1063/1.2216105.
  8. Martin-Cano, D.; Nesterov, M. L.; Fernandez-Dominguez, A. I.; Garcia-Vidal, F. J.; Martin-Moreno, L.; Moreno, Esteban (2010). "Domino plasmons for subwavelength terahertz circuitry". Optics Express. 18 (2): 754–764. doi:10.1364/OE.18.000754. hdl:10261/47867.
  9. Yu, Nanfang; Wang, Qi Jie; Kats, Mikhail A.; Capasso, Federico; et al. (August 2010). "Designer spoof surface plasmon structures collimate terahertz laser beams". Nature Materials. 9: 730–735. doi:10.1038/nmat2822.
  10. Ma, Hui Feng; Shen, Xiaopeng; Cheng, Qiang; Jiang, Wei Xiang; et al. (November 2013). "Broadband and high‐efficiency conversion from guided waves to spoof surface plasmon polaritons". Laser & Photonics Reviews. 8 (1): 146–151. doi:10.1002/lpor.201300118.
  11. Zhang, Hao Chi; Liu, Shuo; Shen, Xiaopeng; Chen, Lin Hui; et al. (November 2014). "Broadband amplification of spoof surface plasmon polaritons at microwave frequencies". Laser & Photonics Reviews. 9 (1): 83–90. doi:10.1002/lpor.201400131.
  12. Kianinejad, Amin; Chen, Zhi Ning; Qiu, Cheng-Wei (June 2015). "Design and Modeling of Spoof Surface Plasmon Modes-Based Microwave Slow-Wave Transmission Line". IEEE Transactions on Microwave Theory and Techniques. 63 (6): 1817–1825. doi:10.1109/TMTT.2015.2422694.
  13. Khanikaev, Alexander B.; Mousavi, S. Hossein; Shvets, Gennady; Kivshar, Yuri S. (September 2010). "One-Way Extraordinary Optical Transmission and Nonreciprocal Spoof Plasmons". Physical Review Letters. 105 (12–17): 126804. doi:10.1103/PhysRevLett.105.126804.
  14. Pan, Bai Cao; Liao, Zhen; Zhao, Jie; Cui, Tie Jun (2014). "Controlling rejections of spoof surface plasmon polaritons using metamaterial particles". Optics Express. 22 (11): 13940–13950. doi:10.1364/OE.22.013940.
  15. Shen, Xiaopeng; Cui, Tie Jun (January 2014). "Ultrathin plasmonic metamaterial for spoof localized surface plasmons". Laser & Photonics Reviews. 8 (1): 137–145. doi:10.1002/lpor.201300144.
  16. Huidobro, Paloma A.; Shen, Xiaopeng; Cuerda, J.; Moreno, Esteban; et al. (April 2014). "Magnetic Localized Surface Plasmons". Physical Review X. 4 (2): 021003. doi:10.1103/PhysRevX.4.021003.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.