5154 aluminium alloy

5154 aluminium alloy is an alloy in the wrought aluminium-magnesium family (5000 or 5xxx series). As an aluminium-magnesium alloy, it combines moderate-to-high strength with excellent weldability. 5154 aluminium is commonly used in welded structures such as pressure vessels and ships. As a wrought alloy, it can be formed by rolling, extrusion, and forging, but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility. It is generally not clad.[1]

Alternate names and designations include AlMg3.5, N5, and A95154. The alloy and its various tempers are covered by the following standards:[2]

  • ASTM B 209: Standard Specification for Aluminium and Aluminium-Alloy Sheet and Plate
  • ASTM B 210: Standard Specification for Aluminium and Aluminium-Alloy Drawn Seamless Tubes
  • ASTM B 211: Standard Specification for Aluminium and Aluminium-Alloy Bar, Rod, and Wire
  • ASTM B 221: Standard Specification for Aluminium and Aluminium-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
  • ASTM B 547: Standard Specification for Aluminium and Aluminium-Alloy Formed and Arc-Welded Round Tube
  • ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates

Chemical composition

The alloy composition of 5154 aluminium is:[2]

The similar alloy A5254 differs only in impurities limits.

Properties

Typical material properties for 5154 aluminium alloy include:[2]

References

  1. Marks' Standard Handbook for Mechanical Engineers, 8th Ed., McGraw Hill, pp. 6-50 to 6-57
  2. 5154 (AlMg3.5, N5, A95154) Aluminum. Retrieved on 2014-12-04.

Aluminium alloy table

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.