Aluminum polymer composite

An aluminum polymer composite (APC) material combines aluminum with a polymer to create materials with interesting characteristics. In 2014 researchers used a 3d laser printer to produce a polymer matrix. When coated with a 50-100 nanometer layer of aluminum oxide, the material was able to withstand loads of as much as 280 megapascals, stronger than any other known material whose density was less than 1,000 kilograms per cubic metre (1,700 lb/cu yd), that of water.[1][2]

Aluminum foam

Spherical aluminum foam pieces bonded by polymers produced foams that were 80-95% metal. Such foams were test=manufactured on an automated assembly line and are under consideration as automobile parts.

Thermal conductivity

Experimentally determined thermal conductivity of specific APCs matched both the Agari and Bruggeman models provide a good estimation for thermal conductivity. The experimental values of both thermal conductivity and diffusivity have shown a better heat transport for the composite filled with large particles.[3]

See also

References

  1. Rathi, Akshat (2014-02-03). "New laser-printed material is lighter than water, as strong as steel". Ars Technica. Retrieved 2014-02-14.
  2. Bauer, J.; Hengsbach, S.; Tesari, I.; Schwaiger, R.; Kraft, O. (2014). "High-strength cellular ceramic composites with 3D microarchitecture". Proceedings of the National Academy of Sciences. 111 (7): 2453–2458. Bibcode:2014PNAS..111.2453B. doi:10.1073/pnas.1315147111. PMC 3932926. PMID 24550268.
  3. Boudenne, A.; Ibos, L.; Fois, M.; Gehin, E.; Majeste, J. C. (2004). "Thermophysical properties of polypropylene/aluminum composites". Journal of Polymer Science Part B: Polymer Physics. 42 (4): 722–732. Bibcode:2004JPoSB..42..722B. doi:10.1002/polb.10713.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.