Ascot-Pullin 500

The Ascot-Pullin 500 was a motorcycle made by Ascot-Pullin Motorcycles in Letchworth, Hertfordshire in 1928.[1] As an updated version of the Pullin motor bicycle of 1919,[3] the Ascot-Pullin 500 overhead valve single was the first time hydraulic brakes were used on a motorcycle.[4]

Ascot-Pullin 500
Right side of a 1929 Ascot-Pullin 500
ManufacturerAscot-Pullin Motorcycles
Production1928–1930[1]
PredecessorPullin-Groom
Engine496 cc (30.3 cu in) air-cooled OHV single
Top speed70 mph (110 km/h)[2]
Power17 bhp (13 kW)[2]
TransmissionThree speed chain final drive
SuspensionPressed steel girder front, rigid rear
BrakesDrum front and rear
Weight330 lb (150 kg) (dry)

History

In 1919, British inventor Cyril Pullin and Stanley L. Groom produced the Pullin motor bicycle,[3] a wheeled machine that included a novel two-stroke engine and extensive manufacture use of steel pressings that anticipated developments by British motorcycle manufacturer Ariel Motorcycles in the late 1950s and Japanese motorcycle manufacturers in 1960s.[3] The bicycle was patented in 1920.[3] Since 1920, Pullin had been working with Stanley Groom to develop and patent a two-stroke motorcycle with a unique design of pressed sheet metal frame and forks. After working on a range of other inventions including the Ascot, Pullin teamed up with Groom again to further develop their ideas and patent the Ascot Pullin motorcycle, with a four-stroke rather than two-cycle engine.[5] At a time when manufacturers were taking a very traditional approach to motorcycle design with conventional frames and engine layout, Pullin and Grom were keen to create an enclosed feel by mounting the engine horizontally within a pressed-steel frame. As well as the hydraulic brakes, Pullin also designed a telescopic centre stand and an adjustable windshield, complete with a windscreen wiper and rear-view mirror, as well as a fully enclosed chain and interchangeable wheels.[2]

With estimated 17 bhp (13 kW), the Ascot-Pullin was capable of 70 mph (110 km/h), but approximately 400 to 500 were produced, so few survive to this day.[1][2]

Pullin's influence can be seen in the emergence of the Ariel Leader and the Vincent Black Prince thirty years later, which both developed the enclosed concept in an attempt to attract a wider range of customers. As with the Ascot-Pullin, however, the fully enclosed look has never really led to high volume sales but instead attracts a niche market.

At present, the U.S. National Highway Traffic Safety Administration recognizes that the first hydraulic brakes on motorcycles occurred in 1952.[6]

See also

References
  1. "Ascot Motor and Manufacturing Co". GracesGuide.co.uk. Grace's Guide Ltd. Archived from the original on 28 March 2019. Retrieved 28 March 2019.
  2. Brown, Roland (1 September 1999). The History of British Bikes (hardback). Bath, United Kingdom: Parragon Plus. ISBN 978-0-752-53153-3. OCLC 42578944. OL 10821108M.
  3. "Pullin motor bicycle, 1919". Science and Society Picture Library. Science Museum. 2004. Retrieved 6 December 2008.
  4. Chadwick, Ian. "Ascot-Pullin". Archived from the original on 11 December 2008. Retrieved 1 December 2008.
  5. Kephart, Douglas. "Researching the Douglas Patents". Retrieved 3 December 2008.
  6. U.S. National Highway Traffic Safety Administration (2000). National Agenda for Motorcycle Safety. Washington, D.C.: United States Department of Transportation. p. 1983. Retrieved 6 December 2008.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.