Bluetooth low energy beacon

An assortment of iBeacons from different vendors

Comparison of 16 major beacon hardware of battery life in months (higher is better) by Aislelabs' The Hitchhikers Guide to iBeacon Hardware[8]

Bluetooth beacons operate using the Bluetooth 4.0 Low Energy standard so battery powered devices are possible. Battery life of devices varies depending on manufacturer. The Bluetooth LE protocol is significantly more power efficient than Bluetooth Classic. Several chipsets makers, including Texas Instruments[9] and Nordic Semiconductor now supply chipsets optimized for iBeacon use. Power consumption depends on iBeacon configuration parameters of advertising interval and transmit power. Battery life can range between 1–48 months. Apple's recommended setting of 100 ms advertising interval with a coin cell battery provides for 1–3 months of life, which increases to 2–3 years as advertising interval is increased to 900 ms.[10]

Battery consumption of the phones is a factor that must be taken into account when deploying beacon enabled apps. A recent report has shown that older phones tend to draw more battery power in the vicinity of iBeacons, while the newer phones can be more efficient in the same environment.[11] In addition to the time spent by the phone scanning, number of scans and number of beacons in the vicinity are also significant factors for battery drain, as pointed out by the Aislelabs report.[12] In a follow up report, Aislelabs found a drastic improvement in battery consumption for iPhone5S, iPhone 5C versus the older model iPhone 4S. At 10 surrounding iBeacons, iPhone 4S can consume up to 11% of battery per hour whereas iPhone5S consumes a little less than 5% battery per hour. [13] An energy efficient iBeacon application needs to consider these aspects in order to strike a good balance between app responsiveness and battery consumption.

Bluetooth beacons can also come in the form of USB dongles. These small USB beacons can be powered by a standard USB port which makes them ideal for long term permanent installations.

Bluetooth beacons can be used to send a packet of information that contains a Universally Unique Identifier (UUID). This UUID is used to trigger events specific to that beacon. In the case of Apple's iBeacon the UUID will be recognized by an app on the user device that will trigger an event. This event is fully customizable by the app developer but in the case of advertising the event might be a push notification with an ad. However, with a UID based system the users device must connect to an online server which is capable of understanding the beacons UUID. Once the UUID is sent to the server the appropriate message action is sent to a users device.

Other methods of advertising are also possible with beacons, URIBeacon and Google's Eddystone allow for a URI transmission mode that unlike iBeacons UID doesn't require an outside server for recognition. The URI beacons transmit a URI which could be a link to a webpage and the user will see that URI directly on their phone.[14]

Indoor positioning with beacons falls into three categories. Implementations with many beacons per room, implementations with one beacon per room, and implementations with a few beacons per building. Indoor navigation with Bluetooth is still in its infancy but attempts have been made to find a working solution.

Beacons can be associated with the artpieces in a museum to encourage further interaction. For example, a notification can be sent to user's mobile device when user is in the proximity to a particular artpiece. By sending user the notification, user is alerted with the artpiece in his proximity, and if user indicates their further interest, a specific app can be installed to interact with the encountered artpiece.[15] In general, a native app is needed for a mobile device to interact with the beacon if the beacon uses iBeacon protocol; whereas if Eddystone is employed, user can interact with the artpiece through a physical web URL broadcast by the Eddystone.

With multiple beacons per room trilateration can be used to estimate a users' position to within about 2 meters.[16] Bluetooth beacons are capable of transmitting their Received Signal Strength Indicator (RSSI) value in addition to other data. This RSSI value is calibrated by the manufacturer of the beacon to be the signal strength of the beacon at a known distance, typically one meter. Using the known output signal strength of the beacon and the signal strength observed by the receiving device an approximation can be made about the distance between the beacon and the device. However this approximation is not very reliable, so for more accurate position tracking other methods are preferred. Since its release in 2010 many studies have been connected using Bluetooth beacons for tracking. A few methods have been tested to find the best way of combining the RSSI values for tracking. Neural networks have been proposed as a good way of reducing the error in estimation.[16] A Stigmergic approach has also been tested, this method uses an intensity map to estimate a users location.[17] Bluetooth LE specification 5.1 added further more precise methods for position determination using multiple beacons.

With only one beacon per room, a user can use their known room position in conjunction with a virtual map of all the rooms in a building to navigate a building. A building with many separate rooms may need a different beacon configuration for navigation. With one beacon in each room a user can use an app to know the room they are in, and a simple shortest path algorithm can be used to give them the best route to the room they are looking for. This configuration requires a digital map of the building but attempts have been made to make this map creation easier.[18]

Beacons can be used in conjunction with pedestrian dead reckoning techniques to add checkpoints to a large open space.[19] PDR uses a known last location in conjunction with direction and speed information provided by the user to estimate a person's location. This technique can be used to estimate a person's location as they walk through a building. Using Bluetooth beacons as checkpoints the user's location can be recalculated to reduce error. In this way a few Bluetooth beacons can be used to cover a large area like a mall.

Using the device tracking capabilities of Bluetooth beacons, in-home patient monitoring is possible. Using bluetooth beacons a person's movements and activities can be tracked in their home.[20] Bluetooth beacons are a good alternative to in house cameras due to their increased level of privacy. Additionally bluetooth beacons can be used in hospitals or other workplaces to ensure workers meet certain standards. For example, a beacon may be placed at a hand sanitizer dispenser in a hospital – the beacons can help ensure employees are using the station regularly.

One use of Beacons is as a "Key finder" where a beacon is attached to, for example, a keyring and a smartphone app can be used to track the last time the device came in range.

Another similar use is to track pets, objects (e.g. baggage) or people. The precision and range of BLE doesn't match GPS, but beacons are significantly less expensive. Several commercial and free solutions exist, which are based on proximity detection, not precise positioning. For example, Nivea launched the "kid-tracker" campaign in Brazil back in 2014."Nivea Ad That Turns into a Kid-Tracker Wins Mobile Grand Prix". adage.com. Shareen Pathak. June 17, 2014.

In mid-2013, Apple introduced iBeacons and experts wrote about how it is designed to help the retail industry by simplifying payments and enabling on-site offers. On December 6, 2013, Apple activated iBeacons across its 254 US retail stores.[21] McDonald's has used the devices to give special offers to consumers in its fast-food stores.[6] As of May 2014, different hardware iBeacons can be purchased for as little as $5 per device to more than $30 per device.[22] Each of these different iBeacons have varying default settings for their default transmit power and iBeacon advertisement frequency. Some hardware iBeacons advertise at as low as 1 Hz while others can be as fast as 10 Hz.[23] iBeacon technology is still in its infancy. One well reported software quirk exists on 4.2 and 4.3 Android systems whereby the system's bluetooth stack crashes when presented with many iBeacons.[24] This was reportedly fixed in Android 4.4.4.[25]

AltBeacon is an open source alternative to iBeacon created by Radius Networks[26]

URIBeacons are different from iBeacons and AltBeacons because rather than broadcasting an identifier, they send a URL which can be understood immediately.[26]

Eddystone is Google's standard for Bluetooth beacons. It supports three types of packets, Eddystone-UID, Eddystone-URL, and Eddystone-TLM.[14] Eddystone-UID functions in a very similar way to Apple's iBeacon, however, it supports additional telemetry data with Eddystone-TLM. The telemetry information is sent along with the UID data. The beacon information available includes battery voltage, beacon temperature, number of packets sent since last startup, and beacon uptime.[14] Using Eddystone protocol, Google had built Google Nearby that allowed Android users to receive beacon notifications without an app.