CMD RAMLink

The RAMLink was one of several RAM expansion products made by Creative Micro Designs (CMD) for Commodore's C64/128 home computers. The RAMLink was intended as a third-party alternative, successor and optionally companion to Commodore's own 17xx-series REU RAM expansion cartridges.

RAMLink device

Unlike the REU, the RAMLink is externally powered and designed from the ground-up to act as a RAM disk.

Features

  • Allows up to 16 MB of expansion RAM. The expansion memory can be provided by a combination of 30-pin SIMM RAM on an internal card, a Commodore 17xx-series REU (or a clone) plugged into the RAM Port, or a GeoRAM.
  • Provides its own copy of JiffyDOS, allowing accelerated operation with any other JiffyDOS-equipped disk device, as well as shorthand commands (DOS Wedge) to conveniently access any other connected storage devices.
  • Full set of partitioning tools and DOS commands.
  • Commodore 1541, 1571 and 1581 disk-layout emulation modes
  • One partition type provides Direct-access REU-like capability
  • Secondary power socket and on-board charging circuit to accept a 6-volt "sealed" lead acid backup battery.
  • Battery-backed real time clock for time and date stamping of files, if the internal RAM card is present.
  • Includes drivers to allow GEOS to use its memory as either a replacement for swap space, or as a regular 'disk' drive.
  • Custom parallel connection for the CMD HD Series line of hard drives.
  • Pass-through expansion port for standard cartridges (e.g. Action Replay, Super Snapshot)
  • On-device buttons to swap device numbers with other drives, switches to disable 17xx-series REUs or change their handling.

References

  • Creative Micro Designs (1990). CMD RAMLink User's Manual, third edition. (supplied with the hardware)


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.