Electrical tape

Electrical tape (or insulating tape) is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It can be made of many plastics, but vinyl is most popular, as it stretches well and gives an effective and long lasting insulation. Electrical tape for class H insulation is made of fiberglass cloth.

Electrical tape, standard black

Varieties

A selection of color-coded electrical tapes.

A wide variety of electrical tapes is available; some for highly specialized purposes. "The primary tapes used in electrical applications are vinyl, rubber, mastic, and varnished cambric."[1] Electricians generally use only black tape for insulation purposes. The other colors are used to indicate the voltage level and phase of the wire. (In fact, the colored tape is referred to as "phasing tape.") This is done on large wire which is available only in black insulation. When wires are phased, a ring of tape is placed on each end near the termination so that the purpose of the wire is obvious. The following table(s) describe the use of electrical tape.

Electrical Tape Color Codes[2]
Tape color Usage (U.S.) Usage (U.K.) Usage (International – new)
Black Insulation
Low voltage, phase A
Insulation
Low voltage
Low voltage, phase B
Red Low voltage, phase B Low voltage, phase A Sheath, 415 V 3 phase
Blue Low voltage, phase C Low voltage, phase C Low voltage, neutral
Sheath, 230 V
Brown High voltage, phase A Low voltage, phase A
Orange High voltage, phase B Sheath, garden tools
Yellow High voltage, phase C Low voltage, phase B Sheath, 110 V site wiring
Green Earth ground Earth
Green with yellow stripe Isolated ground Earth
White Low voltage, neutral
Grey High voltage, neutral Low voltage, phase C

Tape that is approved for electrical applications will carry an approval label from an agency such as Underwriters Laboratories.[3][1]

History

Electrical tape #27

Today electrical tape is simply, "another form of insulation".[4] The original electrical insulating tape was made of cloth tape impregnated with Chatterton's compound, an adhesive material manufactured using Gutta-percha. This type of tape was often used to insulate soldered splices on knob and tube wiring. It was commonly referred to as "friction tape", and had the unique property of being sticky on both sides. Because of this, no matter how it was used it stuck to itself very readily.

In the early 1940s, vinyl plastic emerged as a versatile material for a wide range of applications, from shower curtains to cable insulation. A major ingredient in vinyl film was tricresyl phosphate (TCP), which was used as a plasticizer. Unfortunately, TCP tended to migrate, giving the surface of the vinyl film an oily quality and degrading every tape adhesive known. Research chemists and engineers at 3M set out to create a dependable, pressure-sensitive tape made of vinyl film that would have the required electrical, physical and chemical properties.

Experiments were conducted combining new plasticizers with the white, flour-like vinyl resin. Finally, in January 1946,[5] inventors Snell, Oace, and Eastwold of 3M applied for a patent for a vinyl electrical tape with a plasticizer system and non-sulfur-based rubber adhesive that were compatible. The first commercially available version of the tape was sold for use as a wire-harness wrapping. This original electrical tape wasn't black.[5] Tapes formulated for high-temperature were yellow, and later versions were white. Electrically insulating tapes are essential for enhancing functionality and reliability in a wide range of applications. Some of the most popular types include electrically insulating adhesive tape and electrically insulating film, both of which provide reliable electronic isolation and ensure that direct electrical connection is not made between two or more circuits or their adjacent parts. There is also electrically conducting tape for shielding and similar applications.[6] White tape, because of its instability in ultraviolet light, was eventually replaced with black tape, although colored vinyl tapes are still used as identification and marking tapes. Black became the standard industry color for vinyl standard tape, primarily because of its ultraviolet resistance. Thicknesses originally were 4 mil (100 µm), 8 mil (200 µm) and 12 mil (300 µm). These were standardized to 7 mil (180 µm) and 10 mil (250 µm) in 1948.

See also

References

  1. Bob Goodman and Rodney G. Brown (3M). "Electrical Taping Skills: A Lost Art?", EC&M, p.2.
  2. "Electrical Tape Color Code Chart". Shurtape. Retrieved 31 December 2019.
  3. "Authorized Label Suppliers", UL.com. Accessed January 2016.
  4. Horner, Jim (1986). Automotive Electrical Handbook, p.68. Penguin. ISBN 9780895862389.
  5. "Electrical Tape History". www.3m.com. Retrieved 2020-05-21.
  6. "Electrically Conductive Tape & Composite Adhesives On Robert McKeown Co., Inc". Robert McKeown Co., Inc. Retrieved 2018-08-13.
  • Electrical Taping Skills: A Lost Art?
  • Electrical Tape Tips by KØFF
  • ASTM D1000 - Test methods for electrical tapes
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.