Furness Railway 94 class

Specifications
Configuration:;
• Whyte	0-6-2T
• UIC	C1 n2t
Gauge	4 ft 8 1⁄2 in (1,435 mm)
Driver dia.	4 ft 7 1⁄2 in (1.410 m)
Trailing dia.	3 ft 8 1⁄2 in (1.130 m)
Wheelbase	20 ft 8 in (6.3 m)
Length	30 ft 0.5 in (9.2 m) (1912); 35 ft 6.5 in (10.8 m) (1914)
Height	13 ft 0 in (3.962 m)
Loco weight	1912: 56 long tons 18 cwt (127,500 lb or 57.8 t); 1914: 58 long tons 12 cwt (131,300 lb or 59.5 t);
Fuel type	Coal
Boiler pressure	170 psi (1.17 MPa)
Heating surface	1912: 1,016 sq ft (94.4 m2); 1914: 1,246 sq ft (115.8 m2);
Cylinders	Two
Cylinder size	18 in × 26 in (457 mm × 660 mm)

Type and origin
Power type	Steam
Designer	William Frank Pettigrew
Builder	Kitson and Company
Serial number	4855–4856, 5042–5043
Build date	1912 (2), 1914 (2)
Total produced	4

Furness Railway 94 class; ‘Improved Cleator Tanks’
Type and origin
Power type	Steam
Designer	William Frank Pettigrew
Builder	Kitson and Company
Serial number	4855–4856, 5042–5043
Build date	1912 (2), 1914 (2)
Total produced	4
Specifications
Configuration:;
• Whyte	0-6-2T
• UIC	C1 n2t
Gauge	4 ft 8 1⁄2 in (1,435 mm)
Driver dia.	4 ft 7 1⁄2 in (1.410 m)
Trailing dia.	3 ft 8 1⁄2 in (1.130 m)
Wheelbase	20 ft 8 in (6.3 m)
Length	30 ft 0.5 in (9.2 m) (1912); 35 ft 6.5 in (10.8 m) (1914)
Height	13 ft 0 in (3.962 m)
Loco weight	1912: 56 long tons 18 cwt (127,500 lb or 57.8 t); 1914: 58 long tons 12 cwt (131,300 lb or 59.5 t);
Fuel type	Coal
Boiler pressure	170 psi (1.17 MPa)
Heating surface	1912: 1,016 sq ft (94.4 m2); 1914: 1,246 sq ft (115.8 m2);
Cylinders	Two
Cylinder size	18 in × 26 in (457 mm × 660 mm)
Career
Operators	Furness Railway; → London, Midland and Scottish Railway;
Class	FR: 94 class
Numbers	1912: FR: 94–95; 1914: FR 92–93; → LMS: 11641–11644;
Withdrawn	1929–1934
Disposition	All scrapped

The Furness Railway 94 class, or "Improved Cleator Tanks", were built to haul mineral trains from inland to the blast furnaces on the coast around Workington.

Variations

The first two locos, numbers 94 & 95 were fitted with smokebox superheaters, with the smokebox extended to accommodate this and the chimney set far forward.[1] The apparatus was obviously unsuccessful, as a subsequent order for a further two locos, numbers 92 and 93 omitted this, having instead an extended boiler with the frames being extended to accommodate.

Use

The locomotives operated on the northern part of the Furness Railway, particularly on the tracks of the Whitehaven, Cleator and Egremont Railway and the Cleator & Workington Junction Railway in the Cleator and Frizington areas.[1] Here they hauled trains of Haemetite Ore over the steep and sharply curved lines linking the mines to the coast.

Numbering

By 1923 and the grouping of the FR into the London, Midland and Scottish Railway all four engines were still in service, and received the LMS numbers 11641–11644. The locos were withdrawn between 1929 and 1934.

Table of locomotives
Date new	FR No.	LMS No.	Date withdrawn
1912	94	11641	November 1935
1912	95	11642	September 1929
1914	92	11643	August 1934
1914	93	11644	August 1932

References

Peascod, Michael (September 1983). "Kitson radials of the Furness". Railway Modeller. Beer: Peco Publications & Publicity Ltd. 34 (395): 374–375.

Baxter, Bertram (1984). Baxter, David (ed.). British Locomotive Catalogue 1825–1923, Volume 4: Scottish and remaining English Companies in the LMS Group. Ashbourne, Derbyshire: Moorland Publishing Company. pp. 221–222.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[RM-1] Peascod, Michael (September 1983). "Kitson radials of the Furness". Railway Modeller. Beer: Peco Publications & Publicity Ltd. 34 (395): 374–375.