Harry Bertoia

Starting out as a painting student but soon being asked to reopen the metal workshop in 1939, Bertoia taught jewelry design and metal work. Later, as the war effort made metal a rare and very expensive commodity he began to focus his efforts on jewelry making, even designing and creating wedding rings for Ray Eames and Edmund Bacon's wife Ruth. When all the metal was taken up by war efforts, he became the graphics instructor. Still at Cranbrook, in 1943 he married Brigitta Valentiner, and then moved to California to work for Charles and Ray at the Molded Plywood Division of the Evans Product Company. Bertoia worked there until 1946, then sold his jewelry and monotypes until obtaining work with the Electronics Naval Lab in La Jolla. In 1950, he was invited to move to Pennsylvania to work with Hans and Florence Knoll. (Florence studied also at Cranbrook.) During this period he designed five wire pieces that became known as the Bertoia Collection for Knoll. Among these was the famous diamond chair, a fluid, sculptural form made from a welded lattice work of steel.

In Bertoia's own words, "If you look at these chairs, they are mainly made of air, like sculpture. Space passes right through them."

The chairs were produced with varying degrees of upholstery over their light grid-work, and they were handmade at first because a suitable mass production process could not be found. Unfortunately, the chair edge utilized two thin wires welded on either side of the mesh seat. This design had been granted a patent to the Eames for the wire chair produced by Herman Miller. Herman Miller eventually won and Bertoia & Knoll redesigned the seat edge, using a thicker, single wire, and grinding down the edge of the seat wires at a smooth angle—the same way the chairs are produced today. Nonetheless, the commercial success enjoyed by Bertoia's diamond chair was immediate. It was only in 2005 that Bertoia's asymmetrical chaise longue was introduced at the Milan Furniture Fair and sold out immediately.

Bertoia's "Textured Screen" caused much controversy when it was unveiled for the Dallas Public Library in 1954.

In the mid-1950s, the chairs being produced by Knoll sold so well that the lump sum payment arrangement from Knoll allowed Bertoia to devote himself exclusively to sculpture. He ultimately produced over 50 commissioned public sculptures, many of which are still viewable today. In the 1960s, he began experimenting with sounding sculptures of tall vertical rods on flat bases. He renovated the old barn into an atypical concert hall and put in about 100 of his favorite "Sonambient" sculptures. Bertoia played the pieces in a number of concerts and even produced a series of eleven albums, all entitled "Sonambient," of the music made by his art, manipulated by his hands along with the elements of nature. In the late 1990s, his daughter found a large collection of near mint condition original albums stored away on his property in Pennsylvania. These were sold as collector's items. In 2015, these Sonambient recordings are being re-issued by Important Records as a box set with a booklet of the history and previously unseen photos. Bertoia's work can be found in The Addison Gallery of American Art (Andover, Massachusetts), the Brooklyn Museum (New York City), the Cleveland Museum of Art, the Dallas Public Library, the Detroit Institute of Arts, the Hirshhorn Museum and Sculpture Garden (Washington D.C.), the Honolulu Museum of Art, the Kemper Museum of Contemporary Art (Kansas City, Missouri), the Nasher Sculpture Center (Dallas, Texas), the Philadelphia Museum of Art, the Reading Public Museum (Reading, Pennsylvania), the Allentown Art Museum, Milwaukee art museum, the Smithsonian American Art Museum (Washington D.C.), the Vero Beach Museum of Art (Vero Beach, Florida), and the Walker Art Center (Minneapolis, Minnesota).

Bertoia's "Sunburst Sculpture" owned by the Joslyn Art Museum was originally installed in the Joslyn's Fountain Court. It is now located in the lobby of the Milton R. Abrahams Branch of the Omaha Public Library. Lord Palumbo owns several Bertoia works which are on display at Kentuck Knob. Bertoia's "Sounding Sculpture" can be found in the plaza of The Aon Center, Chicago's fourth-tallest building. Another "Sounding Sculpture", considerably smaller than the one mentioned above, is featured in the Rose Terrace of the Chicago Botanic Garden, and a third very similar to the piece in Chicago called "Sounding Piece" was until 2003 on display at the Herbert F. Johnson Museum of Art at Cornell University in Ithaca, New York. As explained in October 3, 1995 piece in the weekly "Dear Uncle Ezra" column of the university newspaper:

Dear Uncle Ezra,

What is that sound coming from the Johnson Museum? It's a pingy type sound that I guess could be some kind of wind chime but it seems like it's coming from the building itself.

— Just wondering

Dear Chiming In,

Well, it almost is coming from the building itself. What you hear is "Sounding Piece", a sculpture by Harry Bertoia that permanently resides on the sculpture court (outdoor balcony) on the second floor of the Johnson Museum. The chimes sway back and forth on tall rods and "ping" or "gong" into each other (depending on which chime and how hard they collide) when winds move them. It's one of my all-time favorites, well worth a visit if you haven't seen it. You can go out on to the sculpture court until at least the end of October. Once winter sets in, the chimes are secured so that they won't snap in the windy, icy weather.

Uncle Ezra

The sculpture was taken off view after it was damaged in a storm in 2003 . Audiovisual footage of many of Bertoia's sound sculptures can be viewed on websites such as YouTube .

Bertoia was the sculptor commissioned to create the Marshall University fountain in Huntington, West Virginia, to honor the university's football team in the wake of the plane crash that killed them on November 14, 1970. For more information on the disaster, see Marshall University air disaster.

The 1954 Gordon Bunshaft building for Manufacturer's Hanover Trust-now JPMorgan Chase (510 Fifth Avenue at West 43rd Street, New York City) included a full building-width, second-floor screen-sculpture by Bertoia.[2] It was dismantled and removed in 2010 by J. P. Morgan Chase.[3]

The 'Golden Sun' was commissioned in 1967 for The Whiting, an auditorium in Flint, Michigan. Seven feet in diameter, the spherical sculpture consists of 675 gold-plated stainless steel branches and hangs in the building's lobby.[4]

Bertoia fathered one son, Val, and two daughters, Lesta and Celia.[5] One grandson and two granddaughters (one died young), and three great grandchildren have carried on his lineage so far. Some members of the subsequent two generations are engaged in artistic endeavors.

Bertoia died of lung cancer at the age of 63 on November 6, 1978. His wife, Brigitta Valentiner, died in 2007, aged 87.

• Harry Bertoia: Sculptor (1970), June Kompass Nelson, Wayne State University Press, ISBN 0-8143-1402-3
• Harry Bertoia, Printmaker: Monotypes and Other Monographics (1989), June Kompass Nelson, Wayne State University Press, ISBN 0-8143-2063-5
• The World of Bertoia (2003), Nancy N. Schiffer and Val O. Bertoia, Schiffer Publishing, ISBN 0-7643-1798-9
• The Life and Work of Harry Bertoia (2015), Celia Bertoia, Schiffer Publishing, ISBN 978-0-7643-4693-4

Wikimedia Commons has media related to Harry Bertoia.

• HarryBertoia Foundation
• Harry Bertoia Catalogue Raisonné Project
• Bertoia Studio
• Marshall University Air Disaster Memorial Site (Harry Bertoia)
• ArtCycloPedia.Com (Harry Bertoia Online)
• Harry Bertoia's Birthplace, hosting a comprehensive Digital Library
• Harry Bertoia at Find a Grave