Henry Booth

Booth's father Thomas had been an original member of the L&M project original provisional committee in 1822. Henry later replaced his father and quickly became noted for organisational and promotional skills and enthusiasm for the endeavour which was to an extent stalling by 1823 and least in part due to the difficulties and over-commitment of William James. Appointed as committee secretary and noted as becoming second only to Joseph Saunders in commitment to the project Booth was one of the four members of a working party sent to visit other railways at Bedlington Ironworks, Killingworth and Hetton colliery, returning with a report recommending steam locomotive haulage for the L&M.[7] A meeting of 20 May 1824 accepted the report but also took the steps to forming a Joint Stock Company, Booth writing the prospectus which was issued on 29 October 1824.[8]

1825 saw Booth give up his corn merchant interests to concentrate on the L&M project.

On 29 May 1826 following the achievement of enabling act for the L&M a meeting of subscribers Booth was appointed treasurer at a salary of £500 a year.[9] He was to continue competently fulfilling the posts of Treasurer, Secretary and later General Manager for the life of the L&M.[10][lower-alpha 1]

The original enabling act for the L&M was defeated in parliament in 1825, George Stephenson performing badly. Stephenson was more of a self-taught rather than formally trained civil engineer and his situation was not helped my some of his subordinate engineers have made significant errors in the submission which were picked up on. With Booth had requested no scapegoats were made one of the engineers committed suicide.

The L&M use the Rennie brothers for a further submission to built the railway in 1826, the revised presentation focused on use of stationary engines with mobile locomotives only to be considered if their technology improved. With focus away from locomotives and the pro-stationary engine Rennies involved the enabling bill passed in 1826. With the bill passed booth, Saunders and other pro-locomotive directors replaced the Rennies recalling George Stephenson to build the railway, much to the Rennies' chagrin.

As the building of the railway continued toward conclusion the board was split as whether to use stationary engines or mobile locomotives particularly over the significant inclines around Rainhill. Booth was in favour of locomotive haulage however locomotives being built were mostly orientated towards freight haulage to and from mines and not for higher speed passenger work. The single flue design used my locomotives was one of the constraints to raising steam due to the limited heating surface between the hot tubes and water in the boiler. That this understood was indicated by the reverse flue in Hawkworth's Royal George, the most powerful locomotive of the time, which reversed the main flue. Booth and the L&MR board initially gave the Stephensons £100 to experiment with a multi-tube boiler, however the result was not successful. Lancashire Witch, which was initially to have had a multi-tube boiler eventually emerged with a single main flue and two subsidiary flues.

On 20 April 1829 the board of the Liverpool and Manchester Railway project passed a resolution for a competition to be held to prove their railway could be reliably operated by steam locomotives, there being advice from eminent engineers of the age that stationary engines would be required.[11] A prize of £500 was offered as an incentive to the winner, with strict conditions a locomotive would need to meet to enter the trial.[12] Booth and the Stephensons partnered to produce a premium engine with a multi-tube boiler that was to become Stephenson's Rocket and which was to win the Rainhill Trials in October 1829.

There are suggestions it was who Booth proposed the basic design of the first multi-tubular boiler as used on Stephenson's Rocket steam locomotive built in late 1829 for the L&M Railway.[13] The first record of Booth first referring to "method of producing steam without smoke", or the multi-tube boiler, occurs in the Minutes of an L&M board meeting in the Spring of 1827.[14] Marc Seguin of France also has claims to the invention.[15]

Booth was the Company treasurer of the L&M for the 15 years of whole of its operating life, the railway taking over from the Stockton and Darlington as the model to be followed. Especially in the early years pioneering years challenges arose and had to be overcome. Booths contributions to the railway continued to be recognised with his salary being increased from £750 to £1,000 in 1834 and four years later to £1,500.[16] Even though treasurer[lower-alpha 2] Booth made some technical contributions to the railway including lubrication of certain parts of locomotives using grease rather than oil.[17] Booth is also connected with the use of buffers for the coach rolling stock, even having to account to parliament on the matter in 1832 and introducing and devised an arrangement with an additional set of springs with double hanging shackles for first class coaches. [18][lower-alpha 3]

Booth was a leading proponent of working all British railways to one standard time.

Memorial to Booth in Ullet Road Unitarian Church.

On the formation of the London & North Western Railway (LNWR) on 16 July 1846, he became a director of the new large company, serving until 18 May 1859.[19] He also served as the company secretary for the LNWR's Northern Division for a year, being the first person to do so.[20]