IBM 608

The IBM 608 Transistor Calculator, a plugboard-programmable unit, was the first IBM product to use transistor circuits without any vacuum tubes and is believed to be the world's first all-transistorized calculator to be manufactured for the commercial market.[1][2]:34 Announced in April 1955,[3][4] it was released in December 1957. The 608 was withdrawn from marketing in April 1959.[3]


History

The chief designer of the circuits used in the IBM 608 was Robert A. Henle, who later oversaw the development of emitter-coupled logic (ECL) class of circuits.[2]:59 The development of the 608 was preceded by the prototyping of an experimental all-transistor version of the 604. Although this was built and demonstrated in October 1954, it was not commercialized.[2]:50

To spur the adoption of transistor technology, shortly before the first IBM 608 shipped, Tom Watson directed that a date be set after which no new vacuum-tube-based products would be released.[5] This decision constrained IBM product managers, who otherwise had the latitude to select components for their products, to make the move to transistors. As a result, the successor to the IBM 650 used transistors, and it became the IBM 7070the company's first transistorized stored-program computer.[2]:50

It was similar in nature of operation to the vacuum-tube IBM 604, which had been introduced a decade earlier.[2]:34 Although the 608 outpaced its immediate predecessor, the IBM 607 by a factor of 2.5,[3] it was soon rendered obsolete by newer IBM products and only a few dozen were ever delivered.[2]:48[6]

Overview

The 608 contained more than 3,000 germanium transistors.[2]:50 The use of transistors was a significant departure from the previous IBM calculators of this line. The 608's transistors made possible a 50 percent reduction in physical size and a 90 percent reduction in power requirements over comparable vacuum tube models.[7] The 608 also used magnetic core memory, but was still programmed using a control panel.[8] The main memory of the 608 could store 40 nine-digit numbers, and it had an 18-digit accumulator.[8] In raw speed terms, it could perform 4,500 additions per second, it could multiply two nine-digit numbers, yielding an 18-digit result in 11 milliseconds, and it could divide an 18-digit number by a nine-digit number to produce the nine-digit quotient in 13 milliseconds.[3] The 608 could handle 80 program steps.[8]

The 608 was supplied with a type 535 card reader/punch which had its own control plugboard.

See also

References

  1. Bashe, Charles J.; et al. (1986). IBM's Early Computers. MIT. p. 386.
  2. Pugh, Emerson W.; Johnson, Lyle R.; Palmer, John H. (1991). IBM's 360 and early 370 systems. MIT Press. ISBN 0-262-16123-0.
  3. IBM Archives: IBM 608 calculator
  4. Weik, Martin H. (1955). A survey of domestic electronic digital computing systems. Aberdeen Proving Ground, Md. pp. 61–62.
  5. Bashe 1986, p. 387
  6. Bashe 1986, p. 464
  7. "IBM Archives: IBM 608 calculator". www.ibm.com. 2003-01-23. Retrieved 2020-09-29.
  8. Frank da Cruz, The IBM 608 Calculator, Columbia University Computing History
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.