ISO/IEC 15693

ISO/IEC 15693, is an ISO standard for vicinity cards, i.e. cards which can be read from a greater distance as compared with proximity cards. Such cards can normally be read out by a reader without being powered themselves, as the reader will supply the necessary power to the card over the air (wireless).

ISO/IEC 15693 systems operate at the 13.56 MHz frequency, and offer maximum read distance of 1–1.5 meters. As the vicinity cards have to operate at a greater distance, the necessary magnetic field is less (0.15 to 5 A/m) than that for a proximity card (1.5 to 7.5 A/m).

Example applications
  • Public library: books have a unique ID stored in them. Books can be checked out or in by simply placing them in the range of a reader
  • Ski pass: each of those has a unique ID and the system knows for how long the pass is valid etc.

Communication to the card

Communication from the reader to the card uses an amplitude-shift keying with 10% or 100% modulation index.

The data coding is:

1 out of 4 pulse position modulation
2 bits are coded as the position of a 9.44 μs pause in a 75.52 μs symbol time, giving a bit rate of 26.48 kilobits per second. The least-significant bits are sent first.
1 out of 256 pulse position modulation
8 bits are coded as the position of a 9.44 μs pause in a 4.833 ms symbol time, giving a bit rate of 1.65 kbit/s.

Communication to the reader

The card has two ways to send its data back to the reader:

Amplitude shift keying

Amplitude-shift keying 100% modulation index on a 423.75 kHz subcarrier. The data rate can be:

  • Low 6.62 kbit/s (fc/2048)
  • High 26.48 kbit/s (fc/512)

A logic 0 starts with eight pulses of 423.75 kHz followed by an unmodulated time of 18.88 μs (256/ fc); a logic 1 is the other way round. The data frame delimiters are code violations, a start of frame is:

  1. an unmodulated time of 56.64 μs (768/ fc),
  2. 24 pulses of 423.75 kHz
  3. a logic 1

and the end of a frame is:

  1. a logic 0
  2. 24 pulses of 423.75 kHz
  3. an unmodulated time of 56.64 μs

The data are sent using a Manchester code.

Frequency shift keying

Frequency-shift keying by switching between a 423.75 kHz sub carrier (operating frequency divided by 32) and a 484.25 kHz sub carrier (operating frequency divided by 28). The data rate can be:

  • Low 6.67 kbit/s (fc/2032)
  • High 26.69 kbit/s (fc/508)

A logic 0 starts with eight pulses of 423.75 kHz followed by nine pulses of 484.28 kHz; a logic 1 is the other way round. The data frame delimiters are code violations, a start of frame is:

  1. 27 pulses of 484.28 kHz
  2. 24 pulses of 423.75 kHz
  3. a logic 1

and the end of a frame is:

  1. a logic 0
  2. 24 pulses of 423.75 kHz
  3. 27 pulses of 484.28 kHz

The data are sent using a Manchester code.

Manufacturer codes

see ISO/IEC 7816-6

  1. Code 0x01: Motorola
  2. Code 0x02: ST Microelectronics
  3. Code 0x03: Hitachi
  4. Code 0x04: NXP Semiconductors
  5. Code 0x05: Infineon Technologies
  6. Code 0x06: Cylinc
  7. Code 0x07: Texas Instruments Tag-it
  8. Code 0x08: Fujitsu Limited
  9. Code 0x09: Matsushita Electric Industrial
  10. Code 0x0A: NEC
  11. Code 0x0B: Oki Electric
  12. Code 0x0C: Toshiba
  13. Code 0x0D: Mitsubishi Electric
  14. Code 0x0E: Samsung Electronics
  15. Code 0x0F: Hyundai Electronics
  16. Code 0x10: LG Semiconductors
  17. Code 0x12: WISeKey
  18. Code 0x16: EM Microelectronic-Marin
  19. Code 0x1F: Melexis
  20. Code 0x2B: Maxim
  21. Code 0x33: AMIC
  22. Code 0x39: Silicon Craft Technology
  23. Code 0x44: GenTag, Inc (USA)
  24. Code 0x45: Invengo Information Technology Co.Ltd

Implementations

The first byte of the UID should always be 0xE0.

Products with ISO15693 interface
  • EEPROM: various manufacturers like ST Microelectronics or NXP offer EEPROMs readable via ISO15693.
  • μController: Texas Instruments offers a small μController entirely powered by the ISO15693 reading field and capable of reading a simple temperature sensor, wirelessly providing the value of that to the reader.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.