Livewell

A livewell is a tank found on many fishing boats that is used to keep bait and caught fish alive. It works by pumping fresh water from the surrounding body into the tank, as well as keeping the water aerated. A rule of thumb for determining the necessitated size of a livewell is that every one inch of fish needs a gallon of water if it is desired to keep the fish alive for a prolonged period of time.[1]

A wooden livewell (container for live bait), towed by fishing boat. Exposition in Fisheries Museum in Hel (branch of National Maritime Museum in Gdańsk)

Besides size and water circulation, two other key factors of the functionality of a livewell are maintaining proper temperature and removing metabolic waste. Water temperatures should be below 75 °F (24 °C); ice can be used as a coolant.[2]

Oxygen levels

It is very important to maintain adequate oxygen levels in the livewell. It should be above 5 parts per million. Electric aeration systems are often used to do this. These often work by creating a spray that increases the surface area of the water, or by passing it through a Venturi.

A livewell is a box used to transport live aquatic animals; shrimp, baitfish and mature fish, saltwater or freshwater species. A livewell should be made of materials that are non- toxic to aquatic animals. The shape may be square, rectangular, oval or round. The box may be insulated, portable, have a drain and lid. Maintaining minimal safe water quality standards in livewell water is essential and necessary to insure a safe habitat for all the captive animals during transport. When transporting baitfish, shrimp or mature fish, maintaining dissolved oxygen saturation (DO Sat) is the single most important water quality parameter that must be controlled. Livewell oxygen–injection systems and LOX systems insure O2 enriched livewell water. Pure 100% compressed welding oxygen is injected into the water with a precision dose adjustable high-pressure oxygen regulator, oxygen tube and diffuser. Commercial and sport fishing oxygen-injection systems are designed to insure 100% DO Saturation or greater whether the bait or fish load is 1 lb or >1000 lbs. Minimal safe EPA water quality standards for steady state environments (rivers, lakes, ponds, etc.) is 5 ppm DO.

Dissolved oxygen is the single most important factor for keeping bass alive, and an understanding of factors that affect oxygen levels will better enable anglers to keep their fish [aquatic animals] alive. At a moderate water temperature of 70˚F, 100 percent oxygen saturation is 8.8 mg/l of oxygen, whereas at the higher temperature of 80˚F, 100 percent saturation is 7.9 mg/l. Both of these 100 percent saturation oxygen levels are suitable for keeping bass alive. Without injecting oxygen into the livewell, it is very difficult to supply enough oxygen to keep alive heavier tournament limits. Oxygen injection has long been used by Texas Parks and Wildlife Department (TPWD) hatcheries to maintain the health of fish being stocked into reservoirs. Fisheries staff regularly transport or hold fish in ratios equal to or greater than one pound of fish to a gallon of water. However, boat manufactures do not offer oxygen injection system options... Proper installation and operation of an oxygen injection system will ensure oxygen levels remain above the preferred level of 7 mg/l even when livewells contain heavy limits.

References

  1. Live Well With Livewells nccoastalfishing.com
  2. Keeping Bass Alive Livewell Archived 2009-08-22 at the Wayback Machine massbass.com
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.