MÁV Class V43
The MÁV Class V43 is a Hungarian-built electric locomotive, with a characteristic box-like appearance. It was designed and prototyped in the early 1960s, by the 50 C/s Group (a European consortium for promotion of using 25 kV AC/50 Hz on railway routes.The consortium consisted of rail electrification expert companies Siemens, Alsthom, AEG, M.F.Oerlikon, Brown-Boveri and seven smaller firms) commissioned by the Hungarian government.[1]
Class V43 | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() MÁV Class V43 with Intercity train in Hungary | |||||||||||||||||
| |||||||||||||||||
| |||||||||||||||||
|
It was further developed, debugged and series produced in the Ganz factory and operated by MÁV in Hungary. A total of 379 locomotives were built between 1963 and 1982 to replace the MÁV Class V40 and MÁV Class V60, as well as the widespread Class 424 steam locomotives. Nickname of the classic V43 1000 series is Szili (because it has silicon Semiconductor); V43 2000 series is Papagáj (Parrot - because of the painting); V43 3000 series is Cirmos (Tabby - also because of the painting). Initially the ones produced in Germany, could operate on 16 kV AC supply as well.
The V43 is the still the main workhorse for electric traction in Hungary. Its early generation semiconductor technology is now considered obsolete, but the type has good efficiency for both freight and passenger traction. The good efficiency is a result of a technical deficiency: the Hungarian series produced V43 examples are two tons overweight compared the German prototype owing to steel frame manufacturing differences.
This requires the locomotives to constantly work near the edge of their power reserve when pulling and efficiency is coincidentally the highest in that region. Extensive preventive maintenance procedures developed by MÁV depots allowed the V43 to serve 40+ years reliably, despite of being maxed out most of the time.
GySEV
GySEV owns 14 V43 class locomotives. GySEV equipped a few of them with PZB I60R for operation on the Austrian lines of the company. The GySEV locos had several catastrophic crashes. V43 331 crashed at Neufeld, and V43 322 at Komárom. Both locomotives were scrapped. V43 333 crashed with V43 326, and rebuilt using the mainframe of the damaged V43 1003.
Refit
From 1999 the series had two refitment sessions. The first session refits 56 locomotives (V43 2xxx) and equipped them with digital control system to cooperate with the modernised control cars (BDt 4xx series). They also had new suspension fitted. The second 30 locomotive (V43 3xxx) produced between 2007 and 2008. These locomotives equipped with ZWS control system to be remotely controlled from the control cars bought from DB (Bybdtee series).
http://www.railfaneurope.net/list/hungary/hungary_mav_loc.html
Future
The V43 will is being gradually replaced in MÁV service by modern Bombardier TRAXX locomotives. Meanwhile a part of the fleet has received minimal upgrades to comply with EUROFIMA requirements and about half of all V43s are now equipped by modern "semi-pantograph" type catenary current collectors. From the middle of 2011 MÁV-Trakció started to change the class numbers to meet the new UIC standardizations. The V43 1xxx series changed to 431 xxx, the V43 2xxx to 432 xxx and the V43 3xxx to 433 xxx.
References
- Haut, F.J.G. The History of the Electric Locomotive.