M24 mine
The M24 mine was a United States off-route land mine based on the M28A2 HEAT rocket normally fired by the M20 3.5 inch rocket launcher. The rocket was launched from an M143 plastic launch tube.
| M24 mine | |
|---|---|
| Type | High-Explosive Anti-Tank landmine |
| Place of origin | United States |
| Service history | |
| In service | Discontinued |
| Wars | Angola |
| Production history | |
| Designed | December 1961 |
| Manufacturer | Picatinny Arsenal |
| Produced | September 1968 |
| Specifications | |
| Mass | 8.20 kg |
| Length | 59.70 cm |
| Diameter | 8.90 cm |
| Filling | Composition B |
| Filling weight | 853 g |
Operation
A trigger cable was laid across a road, when enough pressure was applied to the trigger cable two conductors inside the cable were forced together closing a circuit. The trigger cable consisted of two segments, requiring simultaneous pressure on both segments to trigger the mine. For wheeled vehicles, the cable was laid directly across the road so that wheels on both sides of the vehicle would touch the cable at the same instance, while for tracked vehicles the cable was laid at an angle of fifteen degrees to prevent the cable slipping between the treads on the tracks.
The rocket had a maximum effective range of about 30 meters beyond which it became too inaccurate to reliably strike the target.
The mine is long out of production and no longer in US service. The mine has possibly been used in Angola.
See also
- List of U.S. Army Rocket Launchers By Model Number