Nimo tube

Nimo was the trademark of a family of very small cathode ray tube (CRTs) manufactured by Industrial Electronics Engineers around mid-1960s, with ten electron guns with stencils which shaped the electron beam as digits.[1][2]

Digits of a BA0000-P31 Tube, showing burn-in of the number 0

Details

The Nimo tube operated on a similar principle as the charactron, but used a much simpler design. They were intended as single digit, simple displays, or as 4 or 6 digits by means of a special horizontal magnetic deflection system. Having only 3 electrode types (a filament, an anode and 10 different grids), the driving circuit for this tube was very simple, and as the image was projected on the glass face, it allowed a much wider viewing angle than for example nixie tubes which Nimo tried to replace.[3]

The tube required 1750 volts direct current (DC) for the anode and also required 1.1 volts AC for the filaments as well as a cathode bias for the filaments. [4]

The German tube manufacturer Telefunken tried to sell an unlicensed copy of the design under the type number XM1000,[5] but was sued by IEE in 1969 and lost, having to destroy all tubes already produced. Only a few survived, most of them not yet labeled.[6]

References

  1. Electronic Design. Hayden Publishing Company. 1971.
  2. EEE. Mactier Publishing Corporation. July 1968.
  3. "IEE: Nimo 10-gun readout data sheet" (PDF). Retrieved 24 May 2013.
  4. "Nimo display tubes catalog no 808, March 1969" (PDF).
  5. "Telefunken: Elektronenstrahl-Ziffernanzeigeröhre XM1000 data sheet" (PDF). Retrieved 24 May 2013.
  6. "Ziffern- und Zeichenanzeigen - Die XM 1000" [Digit and character display – The XM 1000] (in German). Retrieved 3 March 2019.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.