PSA EW/DW engine

The DW8 is for all intents and purposes an evolution of the XUD9 and was the only diesel engine in the family not to feature a turbocharger or common-rail direct injection. It was mainly used in vans such as the Citroën Berlingo and Peugeot Partner but can also be found in more affordable versions of the Peugeot 206 and 306. The DW8 was phased out in 2007 as it does not pass Euro 4 emissions regulations (it is a Euro 3 engine[1]). The DW8 is matched to the BE manual 5-speed and has 250 N⋅m (184 lb⋅ft) of torque.[4]

Specifications

Displacement: 1.9 L (1,868 cc)

Valves: 8 valve, single overhead cam

Bore x Stroke: 82.2 mm × 88 mm (3.24 in × 3.46 in)

Power output: 71 PS (52 kW; 70 hp)

Torque: 127 N⋅m (94 lb⋅ft) at 2500 rpm

Production Start Date: 1 June 2000

The 2.0 L DW10 was the first PSA Diesel engine to feature common rail direct injection, and was given the commercial designation HDi. It has a bore and a stroke of 85 mm × 88 mm (3.35 in × 3.46 in) for a total displacement of 2.0 L (1,997 cc), replacing the XUD9 in 1999. It was initially available in 90 PS (66 kW; 89 hp) form, with two valves per cylinder and a non-intercooled turbo. An intercooler was added later in the year, boosting power to 109 PS (80 kW; 108 hp).

Initially available in the midsized models, such as the Citroën Xsara and Xantia and Peugeot 306, 406 and Peugeot 206 it was soon spread across the PSA range, such as the LCVs, while a 16-valve version(RHW), with 109 PS (80 kW; 108 hp), was used in the large MPVs built in association with Fiat. Suzuki was a customer for these powerplants, using them in the European Vitara, Grand Vitara, and Grand Vitara XL-7. Eurovan-based commercial vans, the Citroën Jumpy, Peugeot Expert and Fiat Scudo were available with a 94 PS (69 kW; 93 hp) DW10 BTED engine, which is essentially an intercooled version of the original 90 PS (66 kW; 89 hp) design.

The DW10 was used as the basis for the new family of Duratorq Diesel engines co-developed with Ford, and it is used in the Focus, Kuga, Mondeo, C-Max and Volvo C30/S40/V50, besides various Citroën and Peugeot passenger models. The DOHC 16-valve powerplants were mated to a second generation common rail injection system and a variable-geometry turbocharger, pushing power to 136 PS (100 kW; 134 hp) (RHR). It is fitted with a six-speed manual transmission or six-speed Aisin-automatic transmission (in Citroën C5 from summer 2004 onwards).

The DW10B and DW10C are Euro 5-compliant, and therefore still available for sale in Europe.[2]

2014 Euro 6 variant DW10FC and DW10FD introduced selective catalytic reduction emissions control technology.

The 2.2 L (2,179 cc) DW12 has a bore and a stroke of 85 mm × 96 mm (3.35 in × 3.78 in). Unlike the initial DW10 designs, it was fitted with 16 valves from the beginning, and made its debut in the 2000 with the Citroën C5, Peugeot 406, Peugeot 406 Coupe and Peugeot 607, being used only in the larger models. In 2006 it was added to the PSA/Ford family, with power reaching 170 PS (125 kW; 168 hp). Land Rover used this engine in the Freelander 2 and Range Rover Evoque. Available as both 160ps or 190ps, Peugeot 4007 and Citroen C-Crosser used the same motor. The unit was used in a longitudinal mounting in the Jaguar XF from 2012 until 2015 in 163 PS or 200 PS, though some early 2012 cars were available as 190 PS. A different 2.2 L engine, Ford's ZSD-422 with a displacement of 2.2 L (2,198 cc) was used in the Citroën and Peugeot LCV range of vans.

The DW12C is a Euro 5-compliant, high-output version.[2]

The DW12 RU is an updated version that meets Euro 6d emission standards, and is intended for light commercial vehicle applications where it replaces the DW10 FU.[5] The Citroen Jumper and Peugeot Boxer (2019-) are powered by this engine. It comes in power ratings of 120 PS/300 Nm, 140 PS/340 Nm and 165 PS/370 Nm.[6]

The EW7 has a bore and a stroke of 82.7 mm × 81.4 mm (3.26 in × 3.20 in), for a displacement of 1.7 L (1,749 cc). It is used as an entry level engine for the Citroën C5, the Peugeot 406 and the Peugeot 407.

The EW7A is Euro 4 only, and no longer for sale in Europe as of January 1, 2011.[1]

The EW10 has a bore and a stroke of 85 mm × 88 mm (3.35 in × 3.46 in), for a displacement of 2.0 L (1,997 cc). It is used widely throughout the PSA Group, including the Citroën C4 and C5 and Peugeot 206, 307, and 407. A gasoline direct injection variant, called EW10 D and marketed as HPi, was briefly used in the Citroën C5 and Peugeot 406 starting in 2001, but was discontinued in 2003 due to low sales.

The EW10 J4S variant is a high performance version used in the 206 GTI 180, 206 RC, 307 Féline, 307 cc and C4 VTS. Power was raised to 177 PS (130 kW; 175 hp), although the two French brands round it up to 180 PS (132 kW; 178 hp) in advertising. EW10 A is a further development of the EW10 J4, presenting somewhat higher power and torque due to the introduction of Variable valve timing (VVT). Fuel consumption is also decreased. Power is 140 PS (103 kW; 138 hp) at 6000 rpm and torque 200 N⋅m (148 lb⋅ft) at 4000 rpm. Citroën usually states 143 PS (105 kW; 141 hp) and Peugeot 140 PS for the same 140 PS (103 kW; 138 hp) engine.

As of January 1, 2010 and the requirements of Euro 5 emission regulations, the EW10 (Euro 4 only[1]) is no longer available in Europe. For most use, they are replaced with Prince engines.

The EW12 was introduced to replace the low-pressure turbo variant of the XU10. It has a bore and stroke of 86 mm × 96 mm (3.39 in × 3.78 in), for a displacement of 2.2 L (2,231 cc). Citroën only uses it on the C8 MPV, while Peugeot, which has more a sporty image, uses it in the 406 SRi and 406 Coupe, 407, the 607 executive model and 807 MPV.

The EW12J4 is Euro 4 only, and no longer for sale in Europe as of January 1, 2011.[1]

• List of PSA engines
• Ford Duratorq engine
• PSA HDi engine

• "PEUGEOT CITROËN PSA specific DTC (fault codes)". Archived from the original on 2016-04-03.