Peak inverse voltage

The peak inverse voltage is either the specified maximum voltage that a diode rectifier can block, or, alternatively, the maximum voltage that a rectifier needs to block in a given circuit.

In semiconductor diodes

In semiconductor diodes, peak reverse voltage or peak inverse voltage is the maximum voltage that a diode can withstand in the reverse direction without breaking down or avalanching.[1][2] If this voltage is exceeded the diode may be destroyed. Diodes must have a peak inverse voltage rating that is higher than the maximum voltage that will be applied to them in a given application.

In rectifier applications

For rectifier applications, peak inverse voltage (PIV) or peak reverse voltage (PRV) is the maximum value of reverse voltage which occurs at the peak of the input cycle when the diode is reverse-biased.[3][4] The portion of the sinusoidal waveform which repeats or duplicates itself is known as the cycle. The part of the cycle above the horizontal axis is called the positive half-cycle, or alternation; the part of the cycle below the horizontal axis is called the negative alternation. With reference to the amplitude of the cycle, the peak inverse voltage is specified as the maximum negative value of the sine-wave within a cycle's negative alternation.

References
  1. Biswanath Paul (2004). Industrial Electronics and Control. PHI Learning Pvt. Ltd. p. 11. ISBN 978-81-203-1811-3.
  2. Gordon McComb and Earl Boysen (2005). Electronics for dummies. For Dummies. p. 80. ISBN 9780764576607.
  3. A. P. Godse and U. A. Bakshi (2009). Electronic circuits. Technical Publications. pp. 7–9. ISBN 978-81-8431-533-2.
  4. Yaduvir Singh (2008). Semiconductor Devices. I. K. International Pvt Ltd. p. 172. ISBN 978-93-8002-612-1.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.