Product distribution

A product distribution is a probability distribution constructed as the distribution of the product of random variables having two other known distributions. Given two statistically independent random variables X and Y, the distribution of the random variable Z that is formed as the product

is a product distribution.

Algebra of random variables

The product is one type of algebra for random variables: Related to the product distribution are the ratio distribution, sum distribution (see List of convolutions of probability distributions) and difference distribution. More generally, one may talk of combinations of sums, differences, products and ratios.

Many of these distributions are described in Melvin D. Springer's book from 1979 The Algebra of Random Variables.[1]

Derivation for independent random variables

If and are two independent, continuous random variables, described by probability density functions and then the probability density function of is[2]

Proof [3]

We first write the cumulative distribution function of starting with its definition

We find the desired probability density function by taking the derivative of both sides with respect to . Since on the right hand side, appears only in the integration limits, the derivative is easily performed using the fundamental theorem of calculus and the chain rule. (Note the negative sign that is needed when the variable occurs in the lower limit of the integration.)

where the absolute value is used to conveniently combine the two terms.

Alternate proof

A faster more compact proof begins with the same step of writing the cumulative distribution of starting with its definition:

where is the Heaviside step function and serves to limit the region of integration to values of and satisfying .

We find the desired probability density function by taking the derivative of both sides with respect to .

where we utilize the translation and scaling properties of the Dirac delta function .

A more intuitive description of the procedure is illustrated in the figure below. The joint pdf exists in the - plane and an arc of constant value is shown as the shaded line. To find the marginal probability on this arc, integrate over increments of area on this contour.

Diagram to illustrate the product distribution of two variables.

Starting with , we have . So the probability increment is . Since implies , we can relate the probability increment to the -increment, namely . Then integration over , yields .

A Bayesian interpretation

Let be a random sample drawn from probability distribution . Scaling by generates a sample from scaled distribution which can be written as a conditional distribution .

Letting be a random variable with pdf , the distribution of the scaled sample becomes and integrating out we get so is drawn from this distribution . However, substituting the definition of we also have which has the same form as the product distribution above. Thus the Bayesian posterior distribution is the distribution of the product of the two independent random samples and .

For the case of one variable being discrete, let have probability at levels with . The conditional density is . Therefore .

Expectation of product of random variables

When two random variables are statistically independent, the expectation of their product is the product of their expectations. This can be proved from the Law of total expectation:

In the inner expression, Y is a constant. Hence:

This is true even if X and Y are statistically dependent. However, in general is a function of Y. In the special case in which X and Y are statistically independent, it is a constant independent of Y. Hence:

Variance of the product of independent random variables

Let be uncorrelated random variables with means and variances . The variance of the product XY is

In the case of the product of more than two variables, if are statistically independent then[4] the variance of their product is

Characteristic function of product of random variables

Assume X, Y are independent random variables. The characteristic function of X is , and the distribution of Y is known. Then from the law of total expectation, we have[5]

If the characteristic functions and distributions of both X and Y are known, then alternatively, also holds.

Mellin transform

The Mellin transform of a distribution with support only on and having a random sample is

The inverse transform is

if are two independent random samples from different distributions, then the Mellin transform of their product is equal to the product of their Mellin transforms:

If s is restricted to integer values, a simpler result is

Thus the moments of the random product are the product of the corresponding moments of and this extends to non-integer moments, for example

.

The pdf of a function can be reconstructed from its moments using the saddlepoint approximation method.

A further result is that for independent X, Y

Gamma distribution example To illustrate how the product of moments yields a much simpler result than finding the moments of the distribution of the product, let be sampled from two Gamma distributions, with parameters whose moments are

Multiplying the corresponding moments gives the Mellin transform result

Independently, it is known that the product of two independent Gamma samples has the distribution

.

To find the moments of this, make the change of variable , simplifying similar integrals to:

thus

The definite integral

is well documented and we have finally

which, after some difficulty, has agreed with the moment product result above.

If X, Y are drawn independently from Gamma distributions with shape parameters then

This type of result is universally true, since for bivariate independent variables thus

or equivalently it is clear that are independent variables.

Special cases

Lognormal distributions

The distribution of the product of two random variables which have lognormal distributions is again lognormal. This is itself a special case of a more general set of results where the logarithm of the product can be written as the sum of the logarithms. Thus, in cases where a simple result can be found in the list of convolutions of probability distributions, where the distributions to be convolved are those of the logarithms of the components of the product, the result might be transformed to provide the distribution of the product. However this approach is only useful where the logarithms of the components of the product are in some standard families of distributions.

Uniformly distributed independent random variables

Let be the product of two independent variables each uniformly distributed on the interval [0,1], possibly the outcome of a copula transformation. As noted in "Lognormal Distributions" above, PDF convolution operations in the Log domain correspond to the product of sample values in the original domain. Thus, making the transformation , such that , each variate is distributed independently on u as

.

and the convolution of the two distributions is the autoconvolution

Next retransform the variable to yielding the distribution

on the interval [0,1]

For the product of multiple ( >2 ) independent samples the characteristic function route is favorable. If we define then above is a Gamma distribution of shape 1 and scale factor 1, , and its known CF is . Note that so the Jacobian of the transformation is unity.

The convolution of independent samples from therefore has CF which is known to be the CF of a Gamma distribution of shape :

.

Making the inverse transformation we get the PDF of the product of the n samples:

The following, more conventional, derivation from Stackexchange[6] is consistent with this result. First of all, letting its CDF is

The density of

Multiplying by a third independent sample gives distribution function

Taking the derivative yields

The author of the note conjectures that, in general,

The geometry of the product distribution of two random variables in the unit square.

The figure illustrates the nature of the integrals above. The shaded area within the unit square and below the line z = xy, represents the CDF of z. This divides into two parts. The first is for 0 < x < z where the increment of area in the vertical slot is just equal to dx. The second part lies below the xy line, has y-height z/x, and incremental area dx z/x.

Independent central-normal distributions

The product of two independent Normal samples follows a modified Bessel function. Let be samples from a Normal(0,1) distribution and . Then


The variance of this distribution could be determined, in principle, by a definite integral from Gradsheyn and Ryzhik,[7]

thus

A much simpler result, stated in a section above, is that the variance of the product of zero-mean independent samples is equal to the product of their variances. Since the variance of each Normal sample is one, the variance of the product is also one.

Correlated central-normal distributions

The product of correlated Normal samples case was recently addressed by Nadarajaha and Pogány.[8] Let be zero mean, unit variance, normally distributed variates with correlation coefficient

Then

Mean and variance: For the mean we have from the definition of correlation coefficient. The variance can be found by transforming from two unit variance zero mean uncorrelated variables U, V. Let

Then X, Y are unit variance variables with correlation coefficient and

Removing odd-power terms, whose expectations are obviously zero, we get

Since we have

High correlation asymptote In the highly correlated case, the product converges on the square of one sample. In this case the asymptote is and

which is a Chi-squared distribution with one degree of freedom.

Multiple correlated samples. Nadarajaha et. al. further show that if iid random variables sampled from and is their mean then

where W is the Whittaker function while .

Using the identity , see for example the DLMF compilation. eqn(13.13.9),[9] this expression can be somewhat simplified to

The pdf gives the distribution of a sample covariance.

Multiple non-central correlated samples. The distribution of the product of correlated non-central normal samples was derived by Cui et.al.[10] and takes the form of an infinite series of modified Bessel functions of the first kind.

Moments of product of correlated central normal samples

For a central normal distribution N(0,1) the moments are

where denotes the double factorial.

If are central correlated variables, the simplest bivariate case of the multivariate normal moment problem described by Kan,[11] then

where

is the correlation coefficient and

[needs checking]

Correlated non-central normal distributions

The distribution of the product of non-central correlated normal samples was derived by Cui et al.[10] and takes the form of an infinite series.

These product distributions are somewhat comparable to the Wishart distribution. The latter is the joint distribution of the four elements (actually only three independent elements) of a sample covariance matrix. If are samples from a bivariate time series then the is a Wishart matrix with K degrees of freedom. The product distributions above are the unconditional distribution of the aggregate of K > 1 samples of .

Independent complex-valued central-normal distributions

Let be independent samples from a normal(0,1) distribution.
Setting are independent zero-mean complex normal samples with circular symmetry. Their complex variances are

The density functions of

are Rayleigh distributions defined as:

The variable is clearly Chi-squared with two degrees of freedom and has PDF

Wells et. al.[12] show that the density function of is

and the cumulative distribution function of is

Thus the polar representation of the product of two uncorrelated complex Gaussian samples is

.

The first and second moments of this distribution can be found from the integral in Normal Distributions above

Thus its variance is .

Further, the density of corresponds to the product of two independent Chi-square samples each with two DoF. Writing these as scaled Gamma distributions then, from the Gamma products below, the density of the product is

Independent complex-valued noncentral Normal Distributions

The product of non-central independent complex Gaussians is described by O’Donoughue and Moura[13] and forms a double infinite series of modified Bessel functions of the first and second types.

Gamma distributions

The product of two independent Gamma samples, , defining , follows[14]

Beta distributions

Nagar et. al.[15] define a correlated bivariate beta distribution

where

Then the pdf of Z = XY is given by

where is the Gauss hypergeometric function defined by the Euler integral

Note that multivariate distributions are not generally unique, apart from the Gaussian case, and there may be alternatives.

Uniform and gamma distributions

The distribution of the product of a random variable having a uniform distribution on (0,1) with a random variable having a gamma distribution with shape parameter equal to 2, is an exponential distribution.[16] A more general case of this concerns the distribution of the product of a random variable having a beta distribution with a random variable having a gamma distribution: for some cases where the parameters of the two component distributions are related in a certain way, the result is again a gamma distribution but with a changed shape parameter.[16]

The K-distribution is an example of a non-standard distribution that can be defined as a product distribution (where both components have a gamma distribution).

Gamma and Pareto distributions

The product of n Gamma and m Pareto independent samples was derived by Nadarajah.[17]

In theoretical computer science

In computational learning theory, a product distribution over is specified by the parameters . Each parameter gives the marginal probability that the ith bit of sampled as is 1; i.e. . In this setting, the uniform distribution is simply a product distribution with every .

Product distributions are a key tool used for proving learnability results when the examples cannot be assumed to be uniformly sampled.[18] They give rise to an inner product on the space of real-valued functions on as follows:

This inner product gives rise to a corresponding norm as follows:

See also

Notes

  1. Springer, Melvin Dale (1979). The Algebra of Random Variables. Wiley. ISBN 978-0-471-01406-5. Retrieved 24 September 2012.
  2. Rohatgi, V. K. (1976). An Introduction to Probability Theory and Mathematical Statistics. Wiley Series in Probability and Statistics. New York: Wiley. doi:10.1002/9781118165676. ISBN 978-0-19-853185-2.
  3. Grimmett, G. R.; Stirzaker, D.R. (2001). Probability and Random Processes. Oxford: Oxford University Press. ISBN 978-0-19-857222-0. Retrieved 4 October 2015.
  4. Sarwate, Dilip (March 9, 2013). "Variance of product of multiple random variables". Stack Exchange.
  5. "How to find characteristic function of product of random variables". Stack Exchange. January 3, 2013.
  6. heropup (1 February 2014). "product distribution of two uniform distribution, what about 3 or more". Stack Exchange.
  7. Gradsheyn, I S; Ryzhik, I M (1980). Tables of Integrals, Series and Products. Academic Press. pp. section 6.561.
  8. Nadarajah, Saralees; Pogány, Tibor (2015). "On the distribution of the product of correlated normal random variables". Comptes Rendus de l'Académie des Sciences, Série I. 354 (2): 201–204. doi:10.1016/j.crma.2015.10.019.
  9. Equ(13.18.9). "Digital Library of Mathematical Functions". NIST: National Institute of Standards and Technology.
  10. Cui, Guolong (2016). "Exact Distribution for the Product of Two Correlated Gaussian Random Variables". IEEE Signal Processing Letters. 23 (11): 1662–1666. Bibcode:2016ISPL...23.1662C. doi:10.1109/LSP.2016.2614539.
  11. Kan, Raymond (2008). "From moments of sum to moments of product". Journal of Multivariate Analysis. 99 (3): 542–554. doi:10.1016/j.jmva.2007.01.013.
  12. Wells, R T; Anderson, R L; Cell, J W (1962). "The Distribution of the Product of Two Central or Non-Central Chi-Square Variates". The Annals of Mathematical Statistics. 33 (3): 1016–1020. doi:10.1214/aoms/1177704469.
  13. O’Donoughue, N; Moura, J M F (March 2012). "On the Product of Independent Complex Gaussians". IEEE Transactions on Signal Processing. 60 (3): 1050–1063. Bibcode:2012ITSP...60.1050O. doi:10.1109/TSP.2011.2177264.
  14. Wolfies (August 2017). "PDF of the product of two independent Gamma random variables". stackexchange.
  15. Nagar, D K; Orozco-Castañeda, J M; Gupta, A K (2009). "Product and quotient of correlated beta variables". Applied Mathematics Letters. 22: 105–109. doi:10.1016/j.aml.2008.02.014.
  16. Johnson, Norman L.; Kotz, Samuel; Balakrishnan, N. (1995). Continuous Univariate Distributions Volume 2, Second edition. Wiley. p. 306. ISBN 978-0-471-58494-0. Retrieved 24 September 2012.
  17. Nadarajah, Saralees (June 2011). "Exact distribution of the product of n gamma and m Pareto random variables". Journal of Computational and Applied Mathematics. 235 (15): 4496–4512. doi:10.1016/j.cam.2011.04.018.
  18. Servedio, Rocco A. (2004), "On learning monotone DNF under product distributions", Information and Computation, 193 (1): 57–74, doi:10.1016/j.ic.2004.04.003

References

  • Springer, Melvin Dale; Thompson, W. E. (1970). "The distribution of products of beta, gamma and Gaussian random variables". SIAM Journal on Applied Mathematics. 18 (4): 721–737. doi:10.1137/0118065. JSTOR 2099424.
  • Springer, Melvin Dale; Thompson, W. E. (1966). "The distribution of products of independent random variables". SIAM Journal on Applied Mathematics. 14 (3): 511–526. doi:10.1137/0114046. JSTOR 2946226.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.