Quantum LC circuit

Wavefunction representations for the first eight bound eigenstates, n = 0 to 7. The horizontal axis shows the position x. The graphs are not normalised

Probability densities |ψ_n(x)|² for the bound eigenstates, beginning with the ground state (n = 0) at the bottom and increasing in energy toward the top. The horizontal axis shows the position x, and brighter colors represent higher probability densities.

Like the one-dimensional harmonic oscillator problem, an LC circuit can be quantized by either solving the Schrödinger equation or using creation and annihilation operators. The energy stored in the inductor can be looked at as a "kinetic energy term" and the energy stored in the capacitor can be looked at as a "potential energy term".

The Hamiltonian of such a system is:

${\displaystyle H={\frac {\phi ^{2}}{2L}}+{\frac {1}{2}}L\omega ^{2}Q^{2}}$

where Q is the charge operator, and ${\displaystyle \phi }$ is the magnetic flux operator. The first term represents the energy stored in an inductor, and the second term represents the energy stored in a capacitor. In order to find the energy levels and the corresponding energy eigenstates, we must solve the time-independent Schrödinger equation,

${\displaystyle H|\psi \rangle =E|\psi \rangle \ }$

${\displaystyle E\psi =-{\frac {\hbar ^{2}}{2L}}\nabla ^{2}\psi +{\frac {1}{2}}L\omega ^{2}Q^{2}\psi }$

Since an LC circuit really is an electrical analog to the harmonic oscillator, solving the Schrödinger equation yields a family of solutions (the Hermite polynomials).

${\displaystyle \left\langle Q|\psi _{n}\right\rangle ={\sqrt {\frac {1}{2^{n}\,n!}}}\cdot \left({\frac {L\omega }{\pi \hbar }}\right)^{1/4}\cdot \exp \left(-{\frac {L\omega Q^{2}}{2\hbar }}\right)\cdot H_{n}\left({\sqrt {\frac {L\omega }{\hbar }}}Q\right)}$

${\displaystyle n=0,1,2,\ldots }$

Stored energy (Hamiltonian) for classical LC circuit:

${\displaystyle {\mathcal {H}}={\frac {q^{2}(t)}{2C}}+{\frac {p^{2}(t)}{2L}}\ }$

Hamiltonian's equations:

${\displaystyle {\frac {\partial {\mathcal {H}}(q,p)}{\partial q}}={\frac {q(t)}{C}}=-{\dot {p}}(t)\ }$

${\displaystyle {\frac {\partial {\mathcal {H}}(q,p)}{\partial p}}={\frac {p(t)}{L}}=-{\dot {q}}(t)\ }$,

where ${\displaystyle q(t)=Cv(t)\ }$ stored capacitor charge (or electric flux) and ${\displaystyle p(t)=Li(t)\ }$ magnetic momentum (magnetic flux), ${\displaystyle v(t)-\ }$ capacitor voltage and ${\displaystyle i(t)-\ }$ inductance current, ${\displaystyle t-\ }$ time variable.

Nonzero initial conditions: At ${\displaystyle q(0),p(0)\ }$ we shall have oscillation frequency:

${\displaystyle \omega ={\frac {1}{\sqrt {LC}}}\ }$,

and wave impedance of the LC circuit (without dissipation):

${\displaystyle \rho ={\sqrt {\frac {L}{C}}}\ }$

Hamiltonian's equations solutions: At ${\displaystyle t\geq 0\ }$ we shall have the following values of charges, magnetic flux and energy:

${\displaystyle \mathbf {q} =q(0)+j{\frac {p(0)}{\omega L}}\ }$

${\displaystyle <q(t)=Re[\mathbf {q} e^{-j\omega t}]\ }$

${\displaystyle p(t)=Im[\omega L\mathbf {q} e^{-j\omega t}]\ }$

${\displaystyle {\mathcal {H}}={\frac {|\mathbf {q} |^{2}}{2C}}=constant\ }$

In the general case the wave amplitudes can be defined in the complex space

${\displaystyle a(t)=a_{1}(t)+ja_{2}(t)\ }$

where ${\displaystyle j={\sqrt {-1}}\ }$.

${\displaystyle a_{1}(t)={\frac {q(t)}{q(0)}}\ }$,

where ${\displaystyle q(0)=D(0)S_{C}={\sqrt {\frac {2\hbar }{\rho }}}\ }$ - electric charge at zero time, ${\displaystyle S_{C}-\ }$ capacitance area.

${\displaystyle a_{2}(t)={\frac {p(t)}{p(0)}}\ }$,

where ${\displaystyle p(0)={\sqrt {2\hbar \rho }}\ }$ - magnetic flux at zero time, ${\displaystyle S_{L}-\ }$ inductance area. Note that, at the equal area elements

${\displaystyle S_{C}=S_{L}=S_{q}\ }$

we shall have the following relationship for the wave impedance:

${\displaystyle \rho ={\sqrt {\frac {L}{C}}}={\frac {q(0)}{p(0)}}}$.

Wave amplitude and energy could be defined as:

${\displaystyle a(t)=ae^{-j\omega t}\ }$

${\displaystyle {\mathcal {H}}=\hbar \omega [a_{1}^{2}(t)+a_{2}^{2}(t)]=\hbar \omega |a|^{2}\ }$.

In the quantum case we have the following definition for momentum operator:

${\displaystyle {\hat {p}}=-j\hbar {\frac {\partial }{\partial q}}}$

Momentum and charge operators produce the following commutator:

${\displaystyle [{\hat {q}},{\hat {p}}]=j\hbar \ }$.

Amplitude operator can be defined as:

${\displaystyle {\hat {a}}={\hat {a_{1}}}+j{\hat {a_{2}}}={\frac {\hat {q}}{q_{0}}}+j{\frac {\hat {p}}{p_{0}}}\ }$,

and phazor:

${\displaystyle {\hat {a(t)}}={\hat {a}}e^{-j\omega t}\ }$.

Hamilton's operator will be:

${\displaystyle {\hat {\mathcal {H}}}\hbar \omega [{\hat {a}}_{1}^{2}(t)+{\hat {a}}_{2}^{2}(t)]=\hbar \omega [{\hat {a}}{\hat {a}}^{\dagger }+1/2]\ }$

Amplitudes commutators:

${\displaystyle [{\hat {a}}_{1}(t),{\hat {a}}_{2}(t)]=j/2\ }$

${\displaystyle [{\hat {a}}(t),{\hat {a}}^{\dagger }(t)]=1\ }$.

Heisenberg uncertainty principle:

${\displaystyle \langle \Delta {\hat {a}}_{1}^{2}(t)\rangle \langle \Delta {\hat {a}}_{2}^{2}(t)\rangle \geq {\frac {1}{16}}\ }$.

When wave impedance of quantum LC circuit takes the value of free space

${\displaystyle \rho _{0}={\sqrt {\frac {L_{0}}{C_{0}}}}={\sqrt {\frac {\mu _{0}}{\epsilon _{0}}}}=2\alpha {\frac {h}{e^{2}}}=2\alpha R_{H}}$,

where ${\displaystyle e-\ }$ electron charge, ${\displaystyle \alpha -\ }$ fine structure constant, and ${\displaystyle R_{H}-\ }$ von Klitzing constant then "electric" and "magnetic" fluxes at zero time point will be:

${\displaystyle q_{0}={\sqrt {\frac {2\hbar }{\rho _{0}}}}={\frac {e}{\sqrt {2\pi \alpha }}}\ }$

${\displaystyle p_{0}={\sqrt {2\hbar \rho _{0}}}=\phi _{0}{\sqrt {\frac {2\alpha }{\pi }}}\ }$,

where ${\displaystyle \phi _{0}={\frac {h}{e}}-\ }$ magnetic flux quantum.

In the classical case the energy of LC circuit will be:

${\displaystyle W_{LC}=W_{C}+W_{L},\ }$

where ${\displaystyle W_{C}=0.5CV_{C}^{2}-\ }$ capacitance energy, and ${\displaystyle W_{L}=0.5LI_{L}^{2}-\ }$ inductance energy. Furthermore, there are the following relationships between charges (electric or magnetic) and voltages or currents:

${\displaystyle Q_{C}=CV_{C}\ }$

${\displaystyle \Phi _{L}=LI_{L}.\ }$

Therefore, the maximal values of capacitance and inductance energies will be:

${\displaystyle W_{max}=W_{LC}={\frac {Q_{C0}^{2}}{2C}}+{\frac {\Phi _{L0}^{2}}{2L}}.\ }$

Note that the resonance frequency ${\displaystyle \omega _{0}=1/{\sqrt {LC}}\ }$ has nothing to do with the energy in the classical case. But it has the following relationship with energy in the quantum case:

${\displaystyle W_{0}={\frac {\hbar \omega _{0}}{2}}={\frac {\hbar }{2{\sqrt {LC}}}}.\ }$

So, in the quantum case, by filling capacitance with the one electron charge:

${\displaystyle Q_{C0}=e=CV_{C}\ }$ and ${\displaystyle W_{C}={\frac {e^{2}}{2C}}.\ }$

The relationship between capacitance energy and the ground state oscillator energy will then be:

${\displaystyle \xi _{C}={\frac {W_{C}}{W_{0}}}={\frac {2\pi }{R_{H}}}{\sqrt {\frac {L}{C}}}=2\pi \cdot {\frac {\rho _{q}}{R_{H}}}.\ }$

where ${\displaystyle \rho _{q}={\sqrt {L/C}}\ }$ quantum impedance of LC circuit. The quantum impedance of the quantum LC circuit could be in practice of the two types:

${\displaystyle \rho _{q}={\sqrt {\frac {L}{C}}}={\begin{cases}\rho _{w}=2\alpha R_{H},&{\mbox{ - wave impedance }}\\\rho _{DOS}=R_{H},&{\mbox{ - DOS impedance }}\end{cases}}}$

So, the energy relationships will be:

${\displaystyle \xi _{C}={\frac {W_{C}}{W_{0}}}=2\pi {\frac {\rho _{q}}{R_{H}}}={\begin{cases}4\pi \alpha ,&{\mbox{at }}\rho _{w}\\2\pi ,&{\mbox{at }}\rho _{DOS}\end{cases}}}$

and that is the main problem of the quantum LC circuit: energies stored on capacitance and inductance are not equal to the ground state energy of the quantum oscillator. This energy problem produces the quantum LC circuit paradox (QLCCP).

Some simple solution of the QLCCP could be found in the following way. Yakymakha (1989) [1](eqn.30) proposed the following DOS quantum impedance definition:

${\displaystyle \rho _{DOS}^{ij}={\frac {\Delta \Phi _{j}}{\Delta Q_{i}}}={\frac {i}{j}}R_{H},\ }$

where ${\displaystyle \Delta \Phi _{j}=j\Phi _{0}-\ }$ magnetic flux, and ${\displaystyle \Delta Q_{i}=ie-\ }$ electric flux, ${\displaystyle i,j=integer.}$

So, there are no electric or magnetic charges in the quantum LC circuit, but electric and magnetic fluxes only. Therefore, not only in the DOS LC circuit, but in the other LC circuits too, there are only the electromagnetic waves. Thus, the quantum LC circuit is the minimal geometrical-topological value of the quantum waveguide, in which there are no electric or magnetic charges, but electromagnetic waves only. Now one should consider the quantum LC circuit as a "black wave box" (BWB), which has no electric or magnetic charges, but waves. Furthermore, this BWB could be "closed" (in Bohr atom or in the vacuum for photons), or "open" (as for QHE and Josephson junction). So, the quantum LC circuit should has BWB and "input - output" supplements. The total energy balance should be calculated with considering of "input" and "output" devices. Without "input - output" devices, the energies "stored" on capacitances and inductances are virtual or "characteristics", as in the case of characteristic impedance (without dissipation). Very close to this approach now are Devoret (2004),[2] which consider Josephson junctions with quantum inductance, Datta impedance of Schrödinger waves (2008) and Tsu (2008),[3] which consider quantum wave guides.

As presented below, the resonance frequency for QHE is:

${\displaystyle \omega _{Q}={\sqrt {\frac {1}{L_{QA}C_{QA}}}}={\frac {\omega _{B}}{2\pi }},\ }$

where ${\displaystyle \omega _{B}=eB/m-\ }$cyclotron frequency, ${\displaystyle L_{QA}={\frac {4\pi R_{H}}{\omega _{B}}}\ }$ and ${\displaystyle C_{QA}={\frac {4\pi }{R_{H}\omega _{B}}}.\ }$ The scaling current for QHE will be:

${\displaystyle I_{B}={\frac {e\omega _{B}}{4\pi }}.\ }$

Therefore, the inductance energy will be:

${\displaystyle W_{L}={\frac {L_{QA}I_{B}^{2}}{2}}={\frac {\hbar \omega _{B}}{4}}.\ }$

So for quantum magnetic flux ${\displaystyle \Phi _{0}=h/e\ }$, inductance energy is half as much as the ground state oscillation energy. This is due to the spin of electron (there are two electrons on Landau level on the same quantum area element). Therefore, the inductance/capacitance energy considers the total Landau level energy per spin.

By analogy to the DOS LC circuit, we have

${\displaystyle W_{0}={\frac {1}{2}}\cdot {\frac {W_{C}}{2\pi \alpha }}={\frac {\gamma _{BY}W_{C}}{2}}\ }$

two times lesser value due to the spin. But here there is the new dimensionless fundamental constant:

${\displaystyle \gamma _{BY}={\frac {1}{2\pi \alpha }}\ }$

which considers topological properties of the quantum LC circuit. This fundamental constant first appeared in the Bohr atom for Bohr radius:

${\displaystyle a_{B}=\gamma _{BY}\cdot \lambda _{0},\ }$

where ${\displaystyle \lambda _{0}=h/m_{0}c-\ }$ Compton wavelength of electron.

Thus, the wave quantum LC circuit has no charges in it, but electromagnetic waves only. So capacitance or inductance "characteristic energies" are ${\displaystyle \gamma _{BY}-\ }$times less than the total energy of the oscillator. In other words, charges "disappear" at the "input" and "generate" at the "output" of the wave LC circuit, adding energies to keep balance.

Electron capacitance could be presented as the spherical capacitor:

${\displaystyle C_{e}={\frac {4\pi \epsilon _{0}}{{\frac {1}{r_{e}}}-{\frac {1}{r_{e}+\lambda _{0}}}}}={\frac {\epsilon _{0}\lambda _{0}}{2\pi }},\ }$

where ${\displaystyle r_{e}={\frac {\lambda _{0}}{2{\sqrt {2}}\pi }}-\ }$ electron radius and ${\displaystyle \lambda _{0}-\ }$Compton wavelength.

Note, that this electron radius is consistent with the standard definition of the spin. Actually, rotating momentum of electron is:

${\displaystyle l_{e}=m_{0}\omega _{e}r_{e}^{2}=\hbar /2,\ }$

where ${\displaystyle \omega _{e}=m_{0}c^{2}/\hbar \ }$ is considered.

Spherical inductance of electron:

${\displaystyle L_{e}={\frac {\mu _{0}\lambda _{0}}{2\pi }}.\ }$

Characterictic impedance of electron:

${\displaystyle \rho _{e}={\sqrt {\frac {L_{e}}{C_{e}}}}={\sqrt {\frac {\mu _{0}}{\epsilon _{0}}}}=\rho _{0}=2\alpha R_{H}.\ }$

Resonance frequency of electron LC circuit:

${\displaystyle \omega _{e}={\sqrt {\frac {1}{L_{e}C_{e}}}}={\frac {2\pi c}{\lambda _{0}}}={\frac {m_{0}c^{2}}{\hbar }}.\ }$

Induced electric flux on electron capacitance:

${\displaystyle Q_{e}=C_{e}V_{e}.\ }$

Energy, stored on electron capacitance:

${\displaystyle W_{Ce}={\frac {C_{e}V_{e}^{2}}{2}}={\frac {Q_{e}^{2}}{2C_{e}}}=2\pi \alpha W_{0},\ }$

where ${\displaystyle W_{0}=m_{0}c^{2}-\ }$ is the "rest energy" of electron. So, induced electric flux will be:

${\displaystyle Q_{e}={\sqrt {2\alpha m_{0}c^{2}\epsilon _{0}\lambda _{0}}}=e.\ }$

Thus, through electron capacitance we have quantized electric flux, equal to the electron charge.

Magnetic flux through inductance:

${\displaystyle \Phi _{e}=L_{e}I_{e}.\ }$

Magnetic energy, stored on inductance:

${\displaystyle W_{Le}={\frac {L_{e}I_{e}^{2}}{2}}={\frac {\Phi _{e}^{2}}{2L_{e}}}=2\pi \alpha W_{0}.\ }$

So, induced magnetic flux will be:

${\displaystyle \Phi _{e}={\sqrt {2\mu _{0}hc\alpha }}=2\alpha \Phi _{0}.\ }$

where ${\displaystyle \Phi _{0}=h/e-\ }$ magnetic flux quantum. Thus, through electron inductance there are no quantization of magnetic flux.

Bohr radius:

${\displaystyle a_{B}={\frac {\lambda _{0}}{2\pi \alpha }}\ }$

where ${\displaystyle \lambda _{0}={\frac {h}{m_{0}c}}-\ }$ Compton wavelength of electron, ${\displaystyle \alpha -\ }$ fine structure constant.

Bohr atomic surface:

${\displaystyle S_{B}=4\pi a_{B}^{2}\ }$.

Bohr inductance:

${\displaystyle L_{B}={\frac {\mu _{0}}{\lambda _{0}}}\cdot S_{B}\ }$.

Bohr capacitance:

${\displaystyle C_{B}={\frac {\epsilon _{0}}{\lambda _{0}}}\cdot S_{B}\ }$.

Bohr wave impedance:

${\displaystyle \rho _{B}={\sqrt {\frac {L_{B}}{C_{B}}}}={\sqrt {\frac {\mu _{0}}{\epsilon _{0}}}}=\rho _{0}.\ }$

Bohr angular frequency:

${\displaystyle \omega _{B}={\sqrt {\frac {1}{L_{B}C_{B}}}}={\frac {\alpha ^{2}}{2}}\cdot {\frac {m_{0}c^{2}}{\hbar }}={\frac {2\pi c}{\lambda _{B}}},\ }$

where ${\displaystyle \lambda _{B}={\frac {4\pi a_{B}}{\alpha }}-\ }$ Bohr wavelength for the first energy level.

Induced electric flux of the Bohr first energy level:

${\displaystyle Q_{B}=C_{B}V_{B}.\ }$

Energy, stored on the Bohr capacitance:

${\displaystyle W_{C}B={\frac {C_{B}V_{B}^{2}}{2}}={\frac {Q_{B}^{2}}{2C_{B}}}=2\pi \alpha W_{B},\ }$

where ${\displaystyle W_{B}=\hbar \omega _{B}-\ }$ is the Bohr energy. So, induced electric flux will be:

${\displaystyle Q_{B}={\sqrt {2\pi \alpha ^{3}m_{0}c^{2}C_{B}}}=e.\ }$

Thus, through the Bohr capacitance we have quantized electric flux, equal to the electron charge.

Magnetic flux through the Bohr inductance:

${\displaystyle W_{L}B={\frac {L_{B}I_{B}^{2}}{2}}={\frac {\Phi _{B}^{2}}{2L_{B}}}=2\pi \alpha W_{0}.\ }$

So, induced magnetic flux will be:

${\displaystyle \Phi _{B}={\frac {\pi \alpha ^{2}ec}{\lambda _{0}}}L_{B}=2\alpha \Phi _{0}.\ }$

Thus, through the Bohr inductance there are no quantization of magnetic flux.

Photon "resonant angular frequency":

${\displaystyle \omega _{w}={\sqrt {\frac {1}{L_{w}C_{w}}}}.\ }$

Photon "wave impedance":

${\displaystyle \rho _{w}={\sqrt {\frac {L_{w}}{C_{w}}}}={\sqrt {\frac {\mu _{0}}{\epsilon _{0}}}}=\rho _{0}.\ }$

Photon "wave inductance":

${\displaystyle L_{w}={\frac {\rho _{0}}{\omega _{w}}}.\ }$

Photon "wave capacitance":

${\displaystyle C_{w}={\frac {1}{\rho _{0}\omega _{w}}}.\ }$

Photon "magnetic flux quantum":

${\displaystyle \phi _{w}=L_{w}I_{w}=\phi _{0}={\frac {h}{e}}.\ }$

Photon "wave current":

${\displaystyle I_{w}={\frac {h}{eL_{w}}}={\frac {e\omega _{w}}{2\alpha }}.\ }$

In the general case 2D- density of states (DOS) in a solid could be defined by the following:

${\displaystyle D_{2D}={\frac {m^{*}}{\pi \hbar ^{2}}}\ }$,

where ${\displaystyle m^{*}=\xi m_{0}-\ }$ current carriers effective mass in a solid, ${\displaystyle m_{0}-\ }$ electron mass, and ${\displaystyle \xi -\ }$ dimensionless parameter, which considers band structure of a solid. So, the quantum inductance can be defined as follows:

${\displaystyle L_{QL}=\phi _{0}^{2}\cdot D_{2D}=\xi \cdot L_{Q0}}$,

where ${\displaystyle L_{Q0}8\pi \beta \cdot L_{QY}\ }$ - the ‘’ideal value’’ of quantum inductance at ${\displaystyle \xi =1\ }$ and another ideal quantum inductance:

${\displaystyle L_{QY}={\frac {\mu _{0}}{\lambda _{0}}}=H/m^{2}\ }$, (3)

where ${\displaystyle \mu _{0}-\ }$ magnetic constant, ${\displaystyle \beta ={\frac {1}{4\alpha }}-\ }$ magnetic "fine structure constant"[4](p. 62), ${\displaystyle \alpha -\ }$ fine structure constant and ${\displaystyle \lambda _{0}-\ }$ Compton wavelength of electron, first defined by Yakymakha (1994)[5] in the spectroscopic investigations of the silicon MOSFETs.

Since defined above quantum inductance is per unit area, therefore its absolute value will be in the QHE mode:

${\displaystyle L_{QA}={\frac {L_{QL}}{n_{B}}}\ }$,

where the carrier concentration is:

${\displaystyle n_{B}={\frac {eB}{h}}\ }$,

and ${\displaystyle h-\ }$ is the Planck constant. By analogically, the absolute value of the quantum capacitance will be in the QHE mode:

${\displaystyle C_{QA}={\frac {C_{QL}}{n_{B}}}\ }$,

where

${\displaystyle C_{QL}=e^{2}\cdot D_{2D}=\xi \cdot C_{Q0}}$,

is DOS definition of the quantum capacitance according to Luryi,[6] ${\displaystyle C_{Q0}=8\pi \alpha \cdot C_{QY}\ }$ - quantum capacitance ‘’ideal value’’ at ${\displaystyle \xi =1\ }$, and other quantum capacitance:

${\displaystyle C_{QY}={\frac {\epsilon _{0}}{\lambda _{0}}}=3.6492417F/m^{2}\ }$,

where ${\displaystyle \epsilon _{0}-\ }$ dielectric constant, first defined by Yakymakha (1994)[5] > in the spectroscopic investigations of the silicon MOSFETs. The standard wave impedance definition for the QHE LC circuit could be presented as:

${\displaystyle \rho _{Q}={\sqrt {\frac {L_{QA}}{C_{QA}}}}={\sqrt {\frac {\phi _{0}^{2}}{e^{2}}}}={\frac {h}{e^{2}}}=R_{H}\ }$,

where ${\displaystyle R_{H}={\frac {h}{e^{2}}}=25.812813k\Omega \ }$ von Klitzing constant for resistance.

The standard resonant frequency definition for the QHE LC circuit could be presented as:

${\displaystyle \omega _{Q}={\frac {1}{\sqrt {L_{QA}C_{QA}}}}={\frac {\hbar \omega _{c}}{\phi _{0}e}}={\frac {\omega _{c}}{2\pi }}}$,

where ${\displaystyle \omega _{c}={\frac {eB}{m^{*}}}-\ }$ standard cyclotron frequency in the magnetic field B.

Hall scaling current quantum will be

${\displaystyle I_{H}={\frac {h}{eL_{QA}}}={\frac {e\omega _{B}}{4\pi }}\ }$,

where ${\displaystyle \omega _{B}={\frac {eB}{m^{*}}}-\ }$ Hall angular frequency.

Electromagnetic induction (Faraday) law:

${\displaystyle V_{ind}={\frac {\partial \Phi }{\partial t}}=-L{\frac {\partial I}{\partial t}},\ }$

where ${\displaystyle \Phi -\ }$ magnetic flux, ${\displaystyle L-\ }$ Josephson junction quantum inductance and ${\displaystyle I-\ }$ Josephson junction current. DC Josephson equation for current:

${\displaystyle I=I_{J}\cdot \sin \phi ,\ }$

where ${\displaystyle I_{J}-\ }$ Josephson scale for current, ${\displaystyle \phi -\ }$ phase difference between superconductors. Current derivative on time variable will be:

${\displaystyle {\frac {\partial I}{\partial t}}=I_{J}\cos \phi \cdot {\frac {\partial \phi }{\partial t}}.\ }$

AC Josephson equation:

${\displaystyle {\frac {\partial \phi }{\partial t}}={\frac {q}{\hbar }}V={\frac {2\pi }{\Phi _{0}}}V,\ }$

where ${\displaystyle \hbar -\ }$ reduced Planck constant, ${\displaystyle \Phi _{0}=h/2e-}$ Josephson magnetic flux quantum, ${\displaystyle q=2e\ }$ and ${\displaystyle e-\ }$ electron charge. Combining equations for derivatives yields junction voltage:

${\displaystyle V={\frac {\Phi _{0}}{2\pi I_{J}}}\cdot {\frac {1}{\cos \phi }}\cdot {\frac {\partial I}{\partial t}}=L_{J}\cdot {\frac {\partial I}{\partial t}},\ }$

where

${\displaystyle L_{J}={\frac {\Phi _{0}}{2\pi I_{J}}}\cdot {\frac {1}{\cos \phi }}\ }$

is the Devoret (1997) [7] quantum inductance.

AC Josephson equation for angular frequency:

${\displaystyle \omega _{J}={\frac {q}{\hbar }}\cdot V.\ }$

Resonance frequency for Josephson LC circuit:

${\displaystyle \omega _{J}={\sqrt {\frac {1}{L_{J}C_{J}}}}.\ }$

where ${\displaystyle C_{J}-\ }$ is the Devoret quantum capacitance, that can be defined as:

${\displaystyle C_{J}={\frac {1}{L_{J}\omega _{J}^{2}}}={\frac {\Phi _{0}I_{J}}{V_{0}^{2}}}\cdot {\frac {\cos \phi }{2\pi }}.\ }$

Quantum wave impedance of Josephson junction:

${\displaystyle \rho _{J}={\sqrt {\frac {L_{J}}{C_{J}}}}={\frac {V_{0}}{I_{J}}}\cdot {\frac {1}{\sqrt {\cos \phi }}}.\ }$

For ${\displaystyle V_{0}=0,1}$mV and ${\displaystyle I_{J}=0,2\mu }$A wave impedance will be ${\displaystyle \rho _{J}=500\Omega .\ }$

Quantum capacitance of Flat Atom (FA):

${\displaystyle C_{F0}={\frac {\epsilon _{0}}{\lambda _{0}}}\cdot S_{F0}=5.1805\cdot 10^{-7}\ }$ F,

where ${\displaystyle \lambda _{0}={\frac {h}{m_{0}c}}\ }$.

Quantum inductance of FA:

${\displaystyle L_{F0}={\frac {\mu _{0}}{\lambda _{0}}}\cdot S_{F0}=7.3524\cdot 10^{-2}\ }$ H.

Quantum area element of FA:

${\displaystyle S_{F0}={\frac {\lambda _{0}c}{\omega _{F0}}}={\frac {h}{m_{0}\omega _{F0}}}=1.4196\cdot 10^{-7}\ }$ m².

Resonance frequency of FA:

${\displaystyle \omega _{F0}={\sqrt {\frac {1}{L_{F0}C_{F0}}}}=5123.9\ }$ rad/s.

Characteristic impedance of FA:

${\displaystyle \rho _{F0}={\sqrt {\frac {L_{F0}}{C_{F0}}}}=\rho _{0}=2\alpha R_{H},\ }$

where ${\displaystyle \rho _{0}\ }$ is the impedance of free space.

Total electric charge on the first energy level of FA:

${\displaystyle Q_{F1}=e{\sqrt {\frac {S_{F0}}{S_{B}}}}=2\cdot 10^{6}e\ }$,

where ${\displaystyle S_{B}=4\pi a_{B}^{2}-\ }$ Bohr quantum area element. First FA was discovered by Yakymakha (1994) [5] as very low frequency resonance on the p- channel MOSFETs. Contrary to the spherical Bohr atom, the FA has hyperbolic dependence on the number of energy level (n) [8]

${\displaystyle \omega _{F0n}={\frac {\omega _{F0}}{n}}.\ }$