Radial stress

Radial stress is stress towards or away from the central axis of a component.

Pressure vessels

The walls of pressure vessels generally undergo triaxial loading. For cylindrical pressure vessels, the normal loads on a wall element are:

  • the longitudinal stress
  • the circumferential (hoop) stress
  • the radial stress.

The radial stress for a thick-walled cylinder is equal and opposite to the gauge pressure on the inside surface, and zero on the outside surface. The circumferential stress and longitudinal stresses are usually much larger for pressure vessels, and so for thin-walled instances, radial stress is usually neglected.

Formula

The radial stress for a thick walled pipe at a point from the central axis is given by

where is the inner radius, is the outer radius, is the inner absolute pressure and is the outer absolute pressure.[1] Maximum radial stress occurs when (at the outside surface).

References

  1. "Stress in Thick-Walled Tubes or Cylinders". EngineeringToolbox. Retrieved 2012-05-18.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.