Ruze's equation
Ruze's equation is an equation relating the gain of an antenna to the Root Mean Square (RMS) of the antenna's random surface errors. The equation was originally developed for parabolic reflector antennas, and later extended to phased arrays. The equation is named after John Ruze who introduced the equation in a paper he wrote in 1952.[1] The equation states that the antenna's gain is inversely proportional to the exponential of the square of the RMS surface errors. Mathematically, the equation for parabolic reflector antennas can be expressed as:
where is the surface RMS errors of the reflector, is the wavelength, and is the gain of the antenna in the absence of surface errors.
The equation is often expressed in decibels as:
(dB)
where the -685.81 coefficient is the numerical value of and
Application to phased array
Ruze's equation, which was originally derived for parabolic reflectors has been extended to phased array applications.[2] For phased arrays, the equation is slightly modified, differing by a factor of 2 in the exponential, to give
The factor of 2 difference between the equation for the phased array and the equation for reflectors is that the electromagnetic wave goes in only one direction for phased arrays, but it goes back and forth in reflectors (the wave is reflected).
Consequently, when expressed in dB, Ruze's equation for phased arrays has a different coefficient, namely:
(dB)
where is the RMS of the z-directed positional errors of the array elements, and as before, is the wavelength.
References
- Kiedron, K.; Chian, C. T.; Chuang, K.L. (October–December 1986). "Statistical Analysis of the 70 Meter Antenna Surface Distortions" (PDF). TDA Progress Report 42-88.
- D'Addario, Larry (November 15, 2008). "Combining Loss of a Transmitting Array due to Phase Errors" (PDF). IPN Progress Report 42-175.
Further reading
- The Radio Astronomy tutorial presented by MIT's Haystack Observatory (Section 6.2.3)