Sand cleaning machine

Raking technology can be used on dry or wet sand. When using this method, a rotating conveyor belt containing hundreds of tines combs through the sand and removes surface and buried debris while leaving the sand on the beach. Raking machines can remove materials ranging in size from small pebbles, shards of glass, and cigarette butts to larger debris, like seaweed and driftwood. By keeping the sand on the beach and only lifting the debris, raking machines can travel at high speeds.

Sifting technology is practiced on dry sand and soft surfaces. The sand and waste are collected via the pick-up blade of the vehicle onto a vibrating screening belt, which leaves the sand behind. The waste is gathered in a collecting tray which is often situated at the back of the vehicle. Because sand and waste are lifted onto the screening belt, sifters must allow time for the sand to sift through the screen and back onto the beach. The size of the materials removed is governed by the size of the holes in the installed screen.

Combined raking and sifting technology differs from pure sifters in that it uses rotating tines to scoop sand and debris onto a vibrating screen instead of relying simply on the pick-up blade. The tines' position can be adjusted to more effectively guide different-sized materials onto the screen. Once on the screen, combined raking and sifting machines use the same technology as normal sifters to remove unwanted debris from the sand.

Sand sifting by hand is used for smaller areas or sensitive habitat. Sand and debris is collected into a windrow or pile and manually shoveled onto screened sifting trays to separate the debris from the sand. While effective, it requires the movement of sand to the site of the tray, and then redistribution of the sand after sifting. A more efficient method is the use of a screened fork at the place where the debris is located. The effort to manually agitate the sand can become tiresome; however, a recent development of a battery-powered sand rake combines the spot cleaning effectiveness of manual screening with the ease of an auto-sifting hand tool.

Sandboni at the gulf of Mexico

Beach volleyball field after rework of a sand cleaner

Sand cleaning machines are used all over the world for the purpose of the safety and happiness of beach-goers. By removing litter, unwanted seaweed, and other debris from the beach, municipalities and resorts are able to maintain their beaches with fewer invested hours.

In addition to their regular litter-removing uses, beach and sand cleaners have been used to clean up after natural disasters. For example:

In Galveston, Texas, low oxygen levels in the water resulted in thousands of dead fish washing ashore. Raking sand cleaners were then used to remove the rotting fish off the beach before they released excessive toxins into the air, sand, and water.[2]

The Olympic Games 2008 saw the first remote-control Sandbonis for the beach volleyball fields in Beijing Chaoyang Park.[3]

The cleanup after the Deepwater Horizon oil spill saw large applications of sand cleaners to the area.[1] Similarly, the Rena oil spill in New Zealand also saw beach cleaners deployed in an effort to remove the affected sand.[4]

The major manufacturers of large beach-sand cleaning machines are considered to be D'Hooghe machinebouw, ingeniería Flozaga Guterh Sl, H Barber & Sons, Cherrington, Beach Tech, PFG Srl, Tuareg srl, Scam Srl, Rockland, Qingzhou Rio and Tirrenia Srl.

There are many other manufacturers of sand cleaners being used for other purposes. For example, a smaller 4-wheel and halftrack sand cleaning machine is used for sandpits in Kindergarten and municipality playing fields and for beach volleyball.[5][6] When environmental or spot-cleaning requires hand operations, an auto-sifting, lightweight, screened rake can be the best choice[7]

• Marine debris
• Waste collector (Trash collector)