Smoke screen

Smoke grenade

These are canister-type grenades used as a ground-to-ground or ground-to-air signalling device. The body consists of a steel sheet metal cylinder with a few emission holes on the top and/or bottom to allow smoke release when the smoke composition inside the grenade is ignited. In those that produce colored smoke, the filler consists of 250 to 350 grams of colored (red, green, yellow or violet) smoke mixture (mostly potassium chlorate, sodium bicarbonate, lactose and a dye). In those that produce screening smoke, the filler usually consists of HC smoke mixture (hexachloroethane/zinc) or TA smoke mixture (terephthalic acid). Another type of smoke grenade is filled with white phosphorus (WP), which is spread by explosive action. The phosphorus catches fire in the presence of air, and burns with a brilliant yellow flame, while producing copious amounts of white smoke (phosphorus pentoxide). WP grenades double as incendiary grenades.

See also: Smoke shells

Artillery and mortars can also fire smoke generating munitions, and are the main means of generating tactical smokescreens on land. As with grenades, artillery shells are available as both emission type smoke shell, and bursting smoke shell. Mortars nearly always use bursting smoke rounds because of the smaller size of mortar bombs and the greater efficiency of bursting rounds.

Smoke generator used to cover bridge building activities during World War 2

Very large or sustained smoke screens are produced by a smoke generator. This machine heats a volatile material (typically oil or an oil based mixture) to evaporate it, then mixes the vapor with cool external air at a controlled rate so it condenses to a mist with a controlled droplet size. Cruder designs simply boiled waste oil over a heater, while more sophisticated ones sprayed a specially formulated oily composition ("fog oil") through nozzles onto a heated plate. Choice of a suitable oil, and careful control of cooling rate, can produce droplet sizes close to the ideal size for Mie scattering of visible light. This produces a very effective obscuration per weight of material used. This screen can then be sustained as long as the generator is supplied with oil, and—especially if a number of generators are used—the screen can build up to a considerable size. One 50 gallon drum of fog oil can obscure 60 miles (97 km) of land in 15 minutes.

A tank creating smoke

Whilst producing very large amounts of smoke relatively cheaply, these generators have a number of disadvantages. They are much slower to respond than pyrotechnic sources, and require a valuable piece of equipment to be sited at the point of emission of the smoke. They are also relatively heavy and not readily portable, which is a significant problem if the wind shifts. To overcome this latter problem they may be used in fixed posts widely dispersed over the battlefield, or else mounted on specially adapted vehicles. An example of the latter is the M56 Coyote generator.

Many armoured fighting vehicles can create smoke screens in a similar way, generally by injecting diesel fuel onto the hot exhaust.

Amphibious assault vehicles releasing smoke

Warships have sometimes used a simple variation of the smoke generator, by injecting fuel oil directly into the funnel, where it evaporates into a white cloud. An even simpler method that was used in the days of steam-propelled warships was to restrict the supply of air to the boiler. This resulted in incomplete combustion of the coal or oil, which produced a thick black smoke. Because the smoke was black, it absorbed heat from the sun and tended to rise above the water. Therefore, navies turned to various chemicals, such as titanium tetrachloride, that produce a white, low-lying cloud.[1][2]

Zinc chloride smoke is grey-white and consists of tiny particles of zinc chloride. The most common mixture for generating these is a zinc chloride smoke mixture (HC), consisting of hexachloroethane, grained aluminium and zinc oxide. The smoke consists of zinc chloride, zinc oxychlorides, and hydrochloric acid, which absorb the moisture in the air. The smoke also contains traces of organic chlorinated compounds, phosgene, carbon monoxide, and chlorine.

Its toxicity is caused mainly by the content of strongly acidic hydrochloric acid, but also due to thermal effects of reaction of zinc chloride with water. These effects cause lesions of the mucous membranes of the upper airways. Damage of the lower airways can manifest itself later as well, due to fine particles of zinc chloride and traces of phosgene. In high concentrations the smoke can be very dangerous when inhaled. Symptoms include dyspnea, retrosternal pain, hoarseness, stridor, lachrymation, cough, expectoration, and in some cases haemoptysis. Delayed pulmonary edema, cyanosis or bronchopneumonia may develop. The smoke and the spent canisters contain suspected carcinogens.

The prognosis for the casualties depends on the degree of the pulmonary damage. All exposed individuals should be kept under observation for 8 hours. Most affected individuals recover within several days, with some symptoms persisting for up to 1–2 weeks. Severe cases can suffer of reduced pulmonary function for some months, the worst cases developing marked dyspnoea and cyanosis leading to death.

Respirators are required for people coming into contact with the zinc chloride smoke.

Chlorosulfuric acid (CSA) is a heavy, strongly acidic liquid. When dispensed in air, it readily absorbs moisture and forms dense white fog of hydrochloric acid and sulfuric acid. In moderate concentrations it is highly irritating to eyes, nose, and skin.

When chlorosulfuric acid comes in contact with water, a strong exothermic reaction scatters the corrosive mixture in all directions. CSA is highly corrosive, so careful handling is required.

Low concentrations cause prickling sensations on the skin, but high concentrations or prolonged exposure to field concentrations can cause severe irritation of the eyes, skin, and respiratory tract, and mild cough and moderate contact dermatitis can result. Liquid CSA causes acid burns of skin and exposure of eyes can lead to severe eye damage.

Affected body parts should be washed with water and then with sodium bicarbonate solution. The burns are then treated like thermal burns. The skin burns heal readily, while cornea burns can result in residual scarring.

Respirators are required for any concentrations sufficient to cause any coughing, irritation of the eyes or prickling of the skin.

Titanium tetrachloride (FM) is a colorless, non-flammable, corrosive liquid. In contact with damp air it hydrolyzes readily, resulting in a dense white smoke consisting of droplets of hydrochloric acid and particles of titanium oxychloride.

The titanium tetrachloride smoke is irritant and unpleasant to breathe.

It is dispensed from aircraft to create vertical smoke curtains, and during World War II it was a favorite smoke generation agent on warships.

Goggles and a respirator should be worn when in contact with the smoke, full protective clothing should be worn when handling liquid FM. In direct contact with skin or eyes, liquid FM causes acid burns.

Red phosphorus and white phosphorus (WP) are red or waxy yellow or white substances. White phosphorus is pyrophoric - can be handled safely when under water, but in contact with air it spontaneously ignites. It is used as an incendiary. Both types of phosphorus are used for smoke generation, mostly in artillery shells, bombs, and grenades.

White phosphorus smoke is typically very hot and may cause burns on contact. Red phosphorus is less reactive, does not ignite spontaneously, and its smoke does not cause thermal burns - for this reason it is safer to handle, but cannot be used so easily as an incendiary.

Aerosol of burning phosphorus particles is an effective obscurant against thermal imaging systems. However, this effect is short-lived. After the phosphorus particles fully burn, the smoke reverts from emission to absorption. While very effective in the visible spectrum, cool phosphorus smoke has only low absorption and scattering in infrared wavelengths. Additives in the smoke that involve this part of the spectrum may be visible to thermal imagers or IR viewers.[6]

A coloured smoke grenade in use

Various signalling purposes require the use of colored smoke. The smoke created is a fine mist of dye particles, generated by burning a mixture of one or more dyes with a low-temperature pyrotechnic composition, usually based on potassium chlorate and lactose (also known as milk sugar).

Colored smoke screen is also possible by adding a colored dye into the fog oil mixture. Typical white smoke screen uses titanium dioxide (or other white pigment), but other colors are possible by replacing titanium dioxide with another pigment. When the hot fog oil condenses on contact with air, the pigment particles are suspended along with the oil vapor. Early smoke screen experiments attempted the use of colored pigment, but found that titanium dioxide was the most light scattering particle known and therefore best for use in obscuring troops and naval vessels. Colored smoke became primarily used for signalling rather than obscuring. In today's military, smoke grenades are found to be non-cancer causing, unlike the 1950s AN-M8 model.

The smoke generator on the Medium Mark B tank used sulfonic acid [7]

The first recorded instance of the tactical use of a smoke screen has been at the Battle of Macau by the Dutch. A barrel of damp gunpowder was fired into the wind so that the Dutch could land under the cover of smoke.

A smoke screen obstructing the view of the parachute landing at Nadzab

Smoke screens are usually used by infantry to conceal their movement in areas of enemy fire. They can also be used by armoured fighting vehicles, such as tanks, to conceal a withdrawal. They have regularly been used since earliest times to disorient or drive off attackers.

A toxic variant of the smokescreen was used and devised by Frank Arthur Brock who used it during the Zeebrugge Raid on 23 April 1918, the British Royal Navy's attempt to neutralize the key Belgian port of Bruges-Zeebrugge.

For the crossing of the Dnieper river in October 1943, the Red Army laid a smoke screen 30 kilometres (19 mi) long. At the Anzio beachhead in 1944, US Chemical Corps troops maintained a 25 km (16 mi) "light haze" smokescreen around the harbour throughout daylight hours, for two months. The density of this screen was adjusted to be sufficient to prevent observation by German forward observers in the surrounding hills, yet not inhibit port operations.

In the Vietnam War "Smoke Ships" were introduced as part of a new Air Mobile Concept to protect crew and man on the ground from small arms fire. In 1964-65, the "Smoke Ship" was first employed by the 145th CAB using UH-1B.[8]

USS Lexington (CV-2) obscured by a smoke screen

There are a number of early examples of using incendiary weapons at sea, such as Greek fire, stinkpots, fire ships, and incendiaries on the decks of turtle ships, which also had the effect of creating smoke. The naval smoke screen is often said to have been proposed by Sir Thomas Cochrane in 1812, although Cochrane's proposal was as much an asphyxiant as an obscurant. It is not until the early twentieth century that there is clear evidence of deliberate use of large scale naval smokescreens as a major tactic.

During the American Civil War, the first smoke screen was used by the R.E. Lee, running the blockade and escaping the USS Iroquois.

The use of smoke screens was common in the naval battles of World War I and World War II.