TIP TIG

TIP TIG is a subset of gas tungsten arc welding (GTAW), using a mechanism called filler wire agitation to enhance molten weld puddle dynamics. This agitation has been found to enhance the weld puddle fluidity and release evolving gases, reducing the chances of inclusions and porosity, and also separate impurities.[1][2][3][4]

TIP TIG welding torch

Welding systems that employ the TIP TIG method are in fact GTAW systems, simply wire fed, that additionally induce a vibratory effect on the wire and apply hot wire current on the filler metal before it even enters the weld pool. The vibration comes from a linear forward and backward motion applied mechanically using a custom wire feeder system. A secondary power, on the other hand, creates the hot wire current.[5][6]

The TIP TIG process was invented and patented 1999 by the Austrian engineer, Siegfried Plasch with the intention of a higher deposition rate compared to the regular GTAW process.[7][2]

References
  1. David H. Phillips (16 February 2016). Welding Engineering: An Introduction. John Wiley & Sons. p. 131. ISBN 978-1-118-76644-6.
  2. "Welding Productivity - July | August 2015". Nxtbook.com. Retrieved 2017-07-25.
  3. https://nsrp.org/wp-content/uploads/2015/10/Deliverable-2005-341r29-Tip_Tig_vs_Tig_Final_Report-Newport_News_Shipbuilding.pdf
  4. "New process, new welding dynamics". The Fabricator. 2011-11-08. Retrieved 2017-07-25.
  5. "Welding Equipment - TIG Welders & Automated Welding Systems". Tip Tig. Retrieved 2017-07-25.
  6. "Enhancing the GTAW process". The Fabricator. 2009-09-15. Retrieved 2017-07-25.
  7. "Welding Productivity Magazine". Magazine.weldingproductivity.com. 2016-12-19. Retrieved 2017-07-25.

Official website

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.