Transition metal hydride

Transition metal hydrides are chemical compounds containing a transition metal bonded to hydrogen. Most transition metals form hydride complexes and some are significant in various catalytic and synthetic reactions. The term "hydride" is used loosely: some so-called hydrides are acidic (e.g., H2Fe(CO)4), whereas some others are hydridic, having H−-like character (e.g., ZnH2).

Classes of metal hydrides

Binary metal hydrides

Many transition metals form compounds with hydrogen, called binary hydrides: binary, because these compounds contain only two elements, and hydride, because the hydrogenic ligand is assumed to have hydridic (H−-like) character. These compounds are invariably insoluble in all solvents, reflecting their polymeric structures. They often exhibit metal-like electrical conductivity. Many are nonstoichiometric compounds. Electropositive metals (Ti, Zr, Hf, Zn) and some other metals form hydrides with the stoichiometry MH or sometimes MH2 (M = Ti, Zr, Hf, V, Zn). The best studied are the binary hydrides of palladium, which readily forms a limiting monohydride. In fact, hydrogen gas diffuses through Pd windows via the intermediacy of PdH.[1]

Structure of the ReH2−
9 anion in the salt K2ReH9.[2]

Ternary metal hydrides

Ternary metal hydrides have the formula AxMHn, where A+ is an alkali or alkaline earth metal cation, e.g. K+ and Mg2+. A celebrated example is K2ReH9, a salt containing two K+ ions and the ReH92− anion. Other homoleptic metal hydrides include the anions in Mg2FeH6 and Mg2NiH4. Some of these anionic polyhydrides satisfy the 18-electron rule, many do not. Because of their high lattice energy, these salts are typically not soluble in any solvents, a well known exception being K2ReH9.[3]

Coordination complexes

The most prevalent hydrides of the transition metals are metal complexes that contain a mix of other ligands in addition to hydride. The range of coligands is large. Virtually all of the metals form such derivatives. The main exceptions include the late metals silver, gold, cadmium, and mercury, which form few or unstable complexes with direct M-H bonds. Examples of an industrially useful hydrides are HCo(CO)4 and HRh(CO)(PPh3)3, which are catalysts for hydroformylation.

HFeCl(dppe)2 is one of the most accessible transition metal hydrides.

The first molecular hydrides of the transition metals were first reported in the 1930s by Walter Hieber and coworkers. They described H2Fe(CO)4 and HCo(CO)4, After a hiatus of several years, and following the release of German war documents on the postulated role of HCo(CO)4 in hydroformylation, several new hydrides were reported in the mid-1950s by three prominent groups in organometallic chemistry: HRe(C5H5)2 by Wilkinson, HMo(C5H5)(CO)3 by Fischer, and HPtCl(PEt3)2 by Chatt.[4] Thousands of such compounds are now known.

Cluster hydrides

Like hydrido coordination complexes, many clusters feature terminal (bound by one M–H bond) hydride ligands. Hydride ligands can also bridge pairs of metals, as illustrated by [HW2(CO)10]−. The cluster H2Os3(CO)10 features both terminal and doubly bridging hydride ligands. Hydrides can also span the triangular face of a cluster as in [Ag3{(PPh2)2CH2}3(μ3-H)(μ3-Cl)]BF4.[5] In the cluster [Co6H(CO)15]−, the hydride is "interstitial", occupying a position at the center of the Co6 octahedron. The assignment for cluster hydrides can be challenging as illustrated by studies on Stryker's reagent [Cu6(PPh3)6H6].[6]

Synthesis

Hydride transfer

Nucleophilic main group hydrides convert many transition metal halides and cations into the corresponding hydrides:

MLnX + LiBHEt3 → HMLn + BEt3 + LiX

These conversions are metathesis reactions, and the hydricity of the product is generally less than of the hydride donor. Classical (and relatively cheap) hydride donor reagents include sodium borohydride and lithium aluminium hydride. In the laboratory, more control is often offered by "mixed hydrides" such as lithium triethylborohydride and Red-Al. Alkali metal hydrides, e.g. sodium hydride, are not typically useful reagents.

Elimination reactions

Beta-hydride elimination and alpha-hydride elimination are processes that afford hydrides. The former a common termination pathway in homogeneous polymerization. It also allows some transition metal hydride complexes to be synthesized from organolithium and Grignard reagents:

MLnX + LiC4H9 → C4H9MLn + LiX
C4H9MLn → HMLn + H2C=CHC2H5

Oxidative additions

Oxidative addition of dihydrogen to a low valent transition metal center is common aspect of hydrogenation. A classic example involves Vaska's complex:[7]

IrICl(CO)(PPh3)2 + H2 ⇌ H2IrIIICl(CO)(PPh3)2

Oxidative addition also can occur to dimetallic complexes, e.g.:

Co2(CO)8 + H2 ⇌ 2 HCo(CO)4

Many acids participate in oxidative additions, as illustrated by the addition of HCl to Vaska's complex:

IrICl(CO)(PPh3)2 + HCl → HIrIIICl2(CO)(PPh3)2

Heterolytic cleavage of dihydrogen

Some metal hydrides form when a metal complex is treated with hydrogen in the presence of a base. The reaction involves no changes in the oxidation state of the metal and can be viewed as splitting H2 into hydride (which binds to the metal) and proton (which binds to the base).

MLnx+ + Base + H2 ⇌ HMLn(x-1)+ + HBase+

Such reaction are assumed to involve the intermediacy of dihydrogen complexes. Bifunctional catalysts activate H2 in this way.

Molybdocene dihydride is produced using NaBH4 as the hydride source.

Thermodynamic considerations
Some M-H Bond Dissociation Energies and pKa's of 18e− Metal Hydrides(MeCN solution)[8]
Metal Hydride ComplexBDE (kj/mol)pKa
H-CpCr(CO)3 257 13.3
H-CpMo(CO)3 290 13.9
H-CpW(CO)3 303 16.1
H-Mn(CO)5 285 14.1
H-Re(CO)5 313 21.1
H-FeH(CO)4 283 11.4
H-CpFe(CO)2 239 19.4
H-CpRu(CO)2 272 20.2
H-Co(CO)4 278 8.3

The values shift by <6 kJ/mol upon substitution of CO by a phosphine ligand.

The M-H bond can in principle cleave to produce a proton, hydrogen radical, or hydride.[9]

HMLn ⇌ MLn− + H+
HMLn ⇌ MLn + H
HMLn ⇌ MLn+ + H−

Although these properties are interrelated, they are not interdependent. A metal hydride can be a thermodynamically a weak acid and a weak H− donor; it could also be strong in one category but not the other or strong in both. The H− strength of a hydride also known as its hydride donor ability or hydricity corresponds to the hydride's Lewis base strength. Not all hydrides are powerful Lewis bases. The base strength of hydrides vary as much as the pKa of protons. This hydricity can be measured by heterolytic cleaving hydrogen between a metal complex and base with a known pKa then measuring the resulting equilibrium. This presupposes that the hydride doesn't heterolytically or homolytically react with itself to reform hydrogen. A complex would homolytically react with itself if the homolytic M-H bond is worth less than half of the homolytic H-H bond. Even if the homolytic bond strength is above that threshold the complex is still susceptible to radical reaction pathways.

2 HMLnz ⇌ 2 MLnz + H2

A complex will heterolytically react with itself when its simultaneously a strong acid and a strong hydride. This conversion results in disproportionation producing a pair of complexes with oxidation states that differ by two electrons. Further electrochemical reactions are possible.

2HMLnz ⇌ MLnz+1 + MLnz-1 + H2

As noted some complexes heterolytically cleave dihydrogen in the presence of a base. A portion of these complexes result in hydride complexes acidic enough to be deprotonated a second time by the base. In this situation the starting complex can be reduced by two electrons with hydrogen and base. Even if the hydride is not acidic enough to be deprotonated it can homolytically react with itself as discussed above for an overall one electron reduction.

Two deprotonations: MLnz + H2 + 2Base ⇌ MLnz-2 + 2H+Base
Deprotonation followed by homolysis: 2MLnz + H2 + 2Base ⇌ 2MLnz-1 + 2H+Base

Hydricity

The affinity for a hydride ligand for a Lewis acid is called its hydricity:

MLnHn− ⇌ MLn(n+1)− + H−

Since hydride does not exist as a stable anion in solution, this equilibrium constant (and its associated free energy) are calculated from measurable equilibria. The reference point is the hydricity of a proton, which in acetonitrile solution is calculated at −76 kcal mol−1:[10]

H+ + H− ⇌ H2 ΔG298 = −76 kcal mol−1

Relative to a proton, most cations exhibit a lower affinity for H−. Some examples include:

[Ni(dppe)2]2+ + H− ⇌ [HNi(dppe)2]+ ΔG298 = −63 kcal mol−1
[Ni(dmpe)2]2+ + H− ⇌ [HNi(dmpe)2]+ ΔG298 = −50.7 kcal mol−1
[Pt(dppe)2]2+ + H− ⇌ [HPt(dppe)2]+ ΔG298 = −53 kcal mol−1
[Pt(dmpe)2]2+ + H− ⇌ [HPt(dmpe)2]+ ΔG298 = −42.6 kcal mol−1

These data suggest that [HPt(dmpe)2]+ would be a strong hydride donor, reflecting the relatively high stability of [Pt(dmpe)2]2+.[11]

Kinetics and mechanism

The rates of proton-transfer to and between metal complexes are often slow.[12] Many hydrides are inaccessible to study through Bordwell thermodynamic cycles. As a result, kinetic studies are employed to elucidate both the relevant thermodynamic parameters. Generally hydrides derived from first row transition metals display the most rapid kinetics followed by the second and third row metal complexes.

Structure and bonding

The determination of structures of metal hydrides can be challenging since hydride ligands do not scatter X-ray well, especially in comparison to the attached metal. Consequently M-H distances are often underestimated, especially in early studies. Often the presence of a hydride ligand was deduced by the absence of a ligand at an apparent coordination site. Classically, the structures of metal hydrides was addressed by neutron diffraction since hydrogen strongly scatters neutrons.[13]

Metal complexes containing terminal hydrides are common. In bi- and polynuclear compounds, hydrides usually are bridging ligands . Of these bridging hydrides many are oligomeric, such as Stryker's reagent.[14] [(Ph3P)CuH]6 and clusters such as [Rh6(PR3)6H12]2+.[15] The final bonding motif is the non-classical dihydride also known as sigma bond dihydrogen adducts or simply dihydrogen complexes. The [W(PR3)2(CO)3(H2)] complex was the first well characterized example of both a non-classical dihydride and sigma-bond complex in general.[16][17] X-ray diffraction is generally insufficient to locate hydrides in crystal structures and thus their location must be assumed. It requires Neutron diffraction to unambiguously locate a hydride near a heavy atom crystallographically. Non-classical hydrides have also been studied with a variety of variable temperature NMR techniques and HD Couplings.

Classical Terminal: M—H
Classical Bridging: M—H—M
Non-Classical: M—H2

Spectroscopy

Late transition metal hydrides characteristically show up-field shifts in their proton NMR spectra. It is common for the M-H signal to appear between δ-5 and -25 with many examples outside this range but generally all appear below 0 ppm. The large shifts arise from the influence of the excited states and due to strong spin-orbit coupling [18] (in contrast, 1H NMR shifts for organic compounds typically occur in the range δ12-1). At one extreme is the 16e complex IrHCl2(PMe(t-Bu)2)2 with a shift of -50.5. The signals often exhibit spin-spin coupling to other ligands, e.g. phosphines.[19]

Metal hydrides exhibit IR bands near 2000 cm−1 for νM-H, although the intensities are variable.[4] These signals can be identified by deuterium labeling.

History

An ill-defined copper hydride had been described in the 1844 as resulting from treatment of copper salts with hypophosphorous acid. It was subsequently found that hydrogen gas was absorbed by mixtures of transition metal salts and Grignard reagents.[20]

The first well defined metal hydrido complex was H2Fe(CO)4, obtained by the low temperature protonation of an iron carbonyl anion. The next reported hydride complex was (C5H5)2ReH. The latter complex was characterized by NMR spectroscopy, which demonstrated the utility of this technique in the study of metal hydride complexes.[20] In 1957, Chatt, Shaw, and Duncanson described trans-PtHCl(PEt3)2 the first non-organometallic hydride (i.e., lacking a metal-carbon bond). It was shown to be air-stable, correcting long-held prejudice that metal hydrides would be unstable.[21]

References
  1. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  2. Abrahams, S. C.; Ginsberg, A. P.; Knox, K. (1964). "Transition Metal-Hydrogen Compounds. II. The Crystal and Molecular Structure of Potassium Rhenium Hydride, K2ReH9". Inorg. Chem. 3 (4): 558–567. doi:10.1021/ic50014a026.
  3. King, R.B. (2000). "Structure and bonding in homoleptic transition metal hydride anions". Coordination Chemistry Reviews. 200–202: 813–829. doi:10.1016/S0010-8545(00)00263-0.
  4. Kaesz, H. D.; R. B. Saillant (1972-06-01). "Hydride complexes of the transition metals". Chemical Reviews. 72 (3): 231–281. doi:10.1021/cr60277a003.
  5. Zavras, Athanasios; Khairallah, George N.; Connell, Timothy U.; White, Jonathan M.; Edwards, Alison J.; Donnelly, Paul S.; O'Hair, Richard A. J. (2013-08-05). "Synthesis, Structure and Gas-Phase Reactivity of a Silver Hydride Complex [Ag3{(PPh2)2CH2}3(μ3-H)(μ3-Cl)]BF4". Angewandte Chemie. 125 (32): 8549–8552. doi:10.1002/ange.201302436. ISSN 1521-3757.
  6. Bennett, Elliot L.; Murphy, Patrick J.; Imberti, Silvia; Parker, Stewart F. (2014-03-17). "Characterization of the Hydrides in Stryker's Reagent: [HCu{P(C6H5)3}]6". Inorganic Chemistry. 53 (6): 2963–2967. doi:10.1021/ic402736t. ISSN 0020-1669. PMID 24571368.
  7. Hartwig, J. F. Organotransition Metal Chemistry, from Bonding to Catalysis; University Science Books: New York, 2010. ISBN 1-891389-53-X
  8. Tilset, M. (2007). "Organometallic Electrochemistry: Thermodynamics of Metal–Ligand Bonding". Comprehensive Organometallic Chemistry III. pp. 279–305. doi:10.1016/B0-08-045047-4/00012-1. ISBN 9780080450476.
  9. Rakowski DuBois, M.; DuBois, D. L. (2009). "The roles of the first and second coordination spheres in the design of molecular catalysts for H2 production and oxidation". Chem. Soc. Rev. 38 (1): 62–72. doi:10.1039/b801197b. PMID 19088965.
  10. Wayner, Danial D. M.; Parker, Vernon D. (1993). "Bond Energies in Solution from Electrode Potentials and Thermochemical Cycles. A Simplified and General Approach". Accounts of Chemical Research. 26 (5): 287–294. doi:10.1021/ar00029a010.
  11. M Tilset "Organometallic Electrochemistry: Thermodynamics of Metal–Ligand Bonding" in Comprehensive Organometallic Chemistry III, Eds Crabtree, R. H.; Mingos, D. M. P. 2007 Elsevier. ISBN 9780080445915.
  12. K. W. Kramarz, J. R. Norton (2007). "Slow Proton-Transfer Reactions in Organometallic and Bioinorganic Chemistry". In Kenneth D. Karlin (ed.). Progress in Inorganic Chemistry. 42. Wiley. pp. 1–65. ISBN 978-0-470-16643-7.
  13. Bau, R.; Drabnis, M. H. (1997). "Structures of Transition Metal Hydrides Determined by Neutron Diffraction". Inorganica Chimica Acta. 259 (1–2): 27–50. doi:10.1016/S0020-1693(97)89125-6.
  14. Chiu, Pauline; Zhengning Li; Kelvin C.M. Fung (January 2003). "An expedient preparation of Stryker's reagent". Tetrahedron Letters. 44 (3): 455–457. doi:10.1016/S0040-4039(02)02609-6. Retrieved 2009-04-17.
  15. Brayshaw, S.; Harrison, A.; McIndoe, J.; Marken, F.; Raithby, P.; Warren, J.; Weller, A. (2007). "Sequential Reduction of High Hydride Count Octahedral Rhodium Clusters [Rh6(PR3)6H12][BArF4]2: Redox-Switchable Hydrogen Storage". J. Am. Chem. Soc. 129 (6): 1793–1804. doi:10.1021/ja066940m. PMID 17284009.
  16. Kubas, G. J.; R. R. Ryan; B. I. Swanson; P. J. Vergamini; H. J. Wasserman (1984-01-01). "Characterization of the first examples of isolable molecular hydrogen complexes, M(CO)3(PR3)2(H2) (M = molybdenum or tungsten; R = Cy or isopropyl). Evidence for a side-on bonded dihydrogen ligand". Journal of the American Chemical Society. 106 (2): 451–452. doi:10.1021/ja00314a049.
  17. Kubas, Gregory J. (2001-08-31). Metal Dihydrogen and -Bond Complexes - Structure, Theory, and Reactivity (1 ed.). Springer. ISBN 978-0-306-46465-2.
  18. Hrobarik, P.; Hrobarikova, V.; Meier, F.; Repisky, M.; Komorovsky, S.; Kaupp, M. (2011). "Relativistic Four-Component DFT Calculations of 1H NMR Chemical Shifts in Transition-Metal Hydride Complexes: Unusual High-Field Shifts Beyond the Buckingham–Stephens Model". Journal of Physical Chemistry A. 115 (22): 5654–5659. Bibcode:2011JPCA..115.5654H. doi:10.1021/jp202327z. PMID 21591659.
  19. J. W. Akitt in "Multinuclear NMR" Joan Mason (Editor), 1987, Plenum Press. ISBN 0-306-42153-4
  20. Joseph Chatt (1968). "Hydride Complexes". Science. 160 (3829): 723–729. Bibcode:1968Sci...160..723C. doi:10.1126/science.160.3829.723. PMID 17784306. S2CID 22350909.
  21. J. Chatt, L. A. Duncanson, B. L. Shaw (1957). "A Volatile Chlorohydride of Platinum". Proc. Chem. Soc.: 329–368. doi:10.1039/PS9570000329.CS1 maint: uses authors parameter (link)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.