Vacuum casting (elastomers)

Vacuum casting is a casting process for elastomers using a vacuum to draw the liquid material into the mold. This process is used when air entrapment is a problem, there are intricate details or undercuts, or if the material is fiber or wire reinforced.[1]

The main disadvantage to this process is the high price for the equipment.[2]

Process

The process starts by placing a two piece silicone mold in a vacuum chamber. The raw material is mixed with degassed and then poured into the mold. The vacuum is then released and the mold removed from the chamber. Finally, the casting is cured in an oven and the mold removed to release the completed casting. The silicone mold can be reused.[3]

In some machines the chamber where the material is mixed a pressure can be applied to increase the pressure differential between the mold cavity and the mixing chamber.[2]

References

Dick, John S.; Annicelli, R. A. (2001), Rubber technology: compounding and testing for performance, Hanser Verlag, p. 245, ISBN 978-1-56990-278-3.
Clemitson, Ian (2008), Castable Polyurethane Elastomers, CRC Press, pp. 92–93, ISBN 978-1-4200-6576-3.
Rosato, Dominick V.; Schott, Nick R.; Rosato, Marlene G. (2001), Plastics Institute of America Plastics Engineering, Manufacturing & Data Handbook, Springer, p. 1426, ISBN 978-0-7923-7316-2.

External links

Casting Solutions

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Dick, John S.; Annicelli, R. A. (2001), Rubber technology: compounding and testing for performance, Hanser Verlag, p. 245, ISBN 978-1-56990-278-3.

[clemitson-2] Clemitson, Ian (2008), Castable Polyurethane Elastomers, CRC Press, pp. 92–93, ISBN 978-1-4200-6576-3.

[3] Rosato, Dominick V.; Schott, Nick R.; Rosato, Marlene G. (2001), Plastics Institute of America Plastics Engineering, Manufacturing & Data Handbook, Springer, p. 1426, ISBN 978-0-7923-7316-2.