Virtually imaged phased array

In a virtually imaged phased array, the phased array is the optical analogue of a phased array antenna at radio frequencies. Unlike a diffraction grating which can be interpreted as a real phased array, in a virtually imaged phased array the phased array is created in a virtual image. More specifically, the optical phased array is virtually formed with multiple virtual images of a light source. This is the fundamental difference from an Echelle grating, where a similar phased array is formed in the real space. The virtual images of a light source in the VIPA are automatically aligned exactly at a constant interval, which is critical for optical interference. This is an advantage of the VIPA over an Echelle grating. When the output light is observed, the virtually imaged phased array works as if light were emitted from a real phased array.

VIPA was proposed and named by Shirasaki in 1996.[1] The details of this new approach to producing angular dispersion were described in the patent.[2] The VIPA was initially of particular interest in the field of optical communications technology. The VIPA was first applied to optical wavelength division multiplexing (WDM) and a wavelength demultiplexer was demonstrated for a channel spacing of 0.8 nm,[1] which was a standard channel spacing then. Later, a much smaller channel separation of 24 pm and a 3 dB bandwidth of 6 pm were achieved by Weiner at 1550 nm wavelength range.[3] For another application, by utilizing the wavelength-dependent length of the light path due to the angular dispersion of the VIPA, the compensation of chromatic dispersion of fibers was studied and demonstrated.[4][5] The compensation was further developed for tunable systems by using adjustable mirrors[6][7][8] or a spatial light modulator (SLM).[9] Using the VIPA, compensation of polarization mode dispersion was also achieved.[10] Furthermore, pulse shaping using the combination of a VIPA for high-resolution wavelength splitting/recombining and a SLM was demonstrated.[11]

A drawback of the VIPA is its limited free spectral range due to the high diffraction order. To expand the functional wavelength range, a VIPA can be combined with a regular diffraction grating to provide a broadband two-dimensional spectral disperser.[12] This was demonstrated for high-resolution WDM (> 1000 channels),[13] but has also been applied to the field of spectroscopy.[14] In microscopy, an endoscope was demonstrated using the two-dimensional spectral disperser.[15] The VIPA has recently been used for an astrophysical instrument [16] and Brillouin spectroscopy in biomechanics.[17]

Operational principle of VIPA

The main component of a VIPA is a glass plate whose normal is slightly tilted with respect to the input light. One side (light input side) of the glass plate is coated with a 100% reflective mirror and the other side (light output side) is coated with a highly reflective but partially transmissive mirror. The side with the 100% reflective mirror has an anti-reflection coated light entrance area, through which a light beam enters the glass plate. The input light is line-focused at the partially transmissive mirror on the light output side. A typical line-focusing lens is a cylindrical lens, which is also part of the VIPA. The light beam is diverging after the beam waist located at the line-focused position.

After the light enters the glass plate through the light entrance area, the light is reflected at the partially transmissive mirror and the 100% reflective mirror, and thus the light travels back and forth between the partially transmissive mirror and the 100% reflective mirror.

When the light beam is reflected each time at the partially transmissive mirror, a small portion of the light power passes through the mirror and travels away from the glass plate. For a light beam passing through the mirror after multiple reflections, the position of the line-focus can be seen in the virtual image when observed from the light output side. Therefore, this light beam travels as if it originated at a virtual light source located at the position of the line-focus and diverged from the virtual light source. The positions of the virtual light sources for all the transmitted light beams automatically align along the normal to the glass plate with a constant spacing, that is, a number of virtual light sources are superimposed to create an optical phased array. Due to the interference of all the light beams, the phased array emits a collimated light beam in one direction, which is at a wavelength dependent angle, and therefore, an angular dispersion is produced.

Similarly to the resolving power of a diffraction grating, which is determined by the number of the illuminated grating elements and the order of diffraction, the resolving power of a VIPA is determined by the reflectivity of the back surface of the VIPA and the thickness of the glass plate. For a fixed thickness, a high reflectivity causes light to stay longer in the VIPA. This creates more virtual sources of light and thus increases the resolving power. On the other hand, with a lower reflectivity, the light in the VIPA is quickly lost, meaning fewer virtual sources of light are superimposed. This results in lower resolving power.

For large angular dispersion with high resolving power, the dimensions of the VIPA should be accurately controlled. Fine tuning of the VIPA characteristics was demonstrated by developing an elastomer-based structure.[18]

A constant reflectivity of the partially transmissive mirror in the VIPA produces a Lorentzian power distribution when the output light is imaged onto a screen, which has a negative effect on the wavelength selectivity. This can be improved by providing the partially transmissive mirror with a linearly decreasing reflectivity. This leads to a Gaussian-like power distribution on a screen and improves the wavelength selectivity or the resolving power.[19]

An analytical calculation of the VIPA was first performed by Vega in 2003 [20] based on the theory of plane waves and an improved model based on the Fresnel diffraction theory was developed by Xiao in 2004.[21]

VIPA devices have been commercialized by LightMachinery and Manx Precision Optics as spectral disperser devices or components with various customized design parameters.