Wheel hub assembly

A wheel hub assembly (WHA), also referred to as hub assembly, wheel hub unit, wheel hub bearing, etc., is an automotive part used in most cars, passenger vehicles, and light and heavy trucks.

Common wheel hub assembly

Operation

The WHA is located between the brake drums or discs and the drive axle. A wheel is bolted on it. Depending on the construction, the end of hub comes equipped with the splined teeth. They mate the teeth on the axle shaft. The axle hub spins along with the wheels bolted to it and provide the power to the wheels in order to rotate.

A roller bearing between the axle hub and axle shaft ensures easy rotation of the non-drive wheels. On the axle side, it is mounted to the holding bracket from the chassis; on the disc side, the wheel is mounted to the bolts of the WHA. When replacing, a wheel hub assembly should be torqued to the vehicle's specifications to prevent failure.[1]

History

Wheel hub bearing are used at least since 1930's when SKF designed a unit used on the Citroen Traction Avant car.[2]

Market

As of 2019 at least 90 million vehicles use SKF Wheel hub bearings.[3]

See also

References
  1. primechoiceautoparts.com, hub bearing assembly
  2. https://www.skf.com/ca/en/products/vehicle-aftermarket/automotive/wheel-end/hub-bearings-and-kits/index.html
  3. https://www.skf.com/ca/en/products/vehicle-aftermarket/automotive/wheel-end/hub-bearings-and-kits/index.html
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.