William (Bill) Masters

William Masters is an engineer, inventor, designer, manufacturing entrepreneur and business advisor/mentor. He holds the first 3D printing patent.,[1] along with patents for other 3D printing technologies (piezo transducer, extrusion, lithography, surface tension, and pin array) and computer assisted manufacturing. He founded Perception Kayaks,[2] at one time the largest kayak manufacturer in the U.S.,[3][4] and has served as a small business delegate to the Reagan and Clinton administrations.[5]

William (Bill) Edward Masters
Mastersin a Perception Kayak
Born1950
EducationBachelor's in Electrical Engineering
Alma materClemson University
OccupationEngineer, Inventor, Designer, Entrepreneur
Spouse(s)Anne Graham Masters, MD
ChildrenNathan, Adam, Allyson
Parent(s)Wallace and Beatrice Masters
AwardsOrder of the Palmetto

Masters is widely recognized as a pioneer in kayak manufacturing[6] and for his success in connecting whitewater enthusiasts with his kayaks.[7][8] The Wall Street Journal, in the August 15, 1998 edition of its Southeastern Journal, described Masters as "an intense, hands-on tinkerer who isn't shy about touting his accomplishments."[9] His innovations in kayak manufacturing, including rotational molding and working in engineered plastics instead of fiberglass, revolutionized the sport and recreational kayak markets.[7]

He currently lives in Greenville, South Carolina with his wife (Dr. Anne Graham Masters), three children, and two grandchildren.

Early life

Masters was born in Pickens, South Carolina, and grew up in Easley Mill Village, a mill town in the Upstate, to Beatrice Masters (née Landreth) and Wallace Masters. He graduated with honors from Pickens County Vocational School in 1968 and was the first member of his family to attend college, earning a bachelor's degree in electrical engineering from Clemson University.

3D Printing

In the mid 1970s, Masters began work on a revolutionary manufacturing process, one which he compared to using a straw to deposit "spit wads." "When you shoot a lot of wads," he explained, "they begin to take shape. If you can control the direction of the wads and the motion of the device shooting them, you can produce any desired shape."[10]

Masters filed a patent for his Computer Automated Manufacturing Process and System on July 2, 1984 (US 4665492)).[11] This filing is on record at the USPTO as the first 3D printing patent in history; it was the first of three patents belonging to Masters that laid the foundation for the 3D printing systems used today.[12][13]

Masters introduced his 3D printing technology at CAD/CAM conferences in the late 1980s[12] with little success. Undeterred, he founded Perception Systems to handle research and development of his technology. In 1992, Perception Systems changed its name to Ballistic Particle Manufacturing (BPM)[14] and received funding from Palmetto Seed Capital, a state funded South Carolina venture capital group by headed by former South Carolina Governor Carroll A. Campbell, Jr..[15]

BPM launched its Personal Modeler 2100 in 1996, a device that used a computer aided design (CAD) system to manufacture an object of any shape by "shooting droplets of plastic."[16] During this time, Masters was forced to part ways with BPM to focus on his growing kayak business.[4]

The company, responding to pressure from investors and competitors, shipped and installed sixteen Personal Modelers in beta to customers and distributors. After eight years of product development, the technology was still unreliable, and most of the companies who received the Personal Modelers shipped them back and turned their attention elsewhere.

Negative publicity resulting from the product introduction proved to be fatal, which had struggled to develop its market. BPM would go out of business in 1997,[15] but the corporate entity still exists.

Two other American inventors developed 3D printing technology that achieved commercial viability in additive manufacturing: Charles W. Hull, who invented stereo lithography (filed Aug 8, 1984), and S. Scott Crump, who patented fused deposition modeling (filed Oct 30, 1989). Both of these men filed their patent applications after Bill Masters (filed Jul 2, 1984), making him the true father of 3D printing.

Masters's original 3D printing patent expired in 2004.

Perception Kayaks

As a student at Clemson University, Masters received a broken kayak as payment for fixing a friend's car. He repaired the kayak and his workmanship attracted the attention of other kayakers, who quickly asked him to repair their kayaks.[17]

A whitewater enthusiast from the first time he went down the Chattooga River, Masters launched his business with $50 in capital.[6] Over the course of ten days in 1972, he completed his first handmade kayak in the back of an old mortuary. The one-off drew interest from other river runners and Masters sold it for $90.[18]

In August 1974, Masters launched a new kayak manufacturing company, Fiberglass Technology, in Liberty, South Carolina. The company produced an average of 150 boats per year.[19]

In 1976, Masters changed the name of the company to Perception Kayaks. Within five years, this operation would become the largest kayak manufacturer in the United States.[20] As Perception grew with the kayak market, it expanded operations internationally to Chester, England in 1982 and New Zealand in 1986. Masters developed and registered 30+ patents in boat design, plastics manufacturing, computers and heat transfer and used these patents to keep Perception at the forefront of the industry.[21]

He realized early on that customer interaction would drive sales growth. During the 1990s, Perception introduced various ways to interact with prospects and customers, including a professional call center, an interactive website, and two technical field representatives to promote the sport of kayaking through education.[22]

This early pilot program introduced kayaking to novices by offering free coaching. As Masters noted, "Coaching from a skilled trainer, and the opportunity to try any of 30 kayak designs, helps people push past their doubts and get out onto the water, paddling closer to a future kayak purchase.”[23]

Perception continued to grow throughout the 80s and into the 90s, producing successful lines of kayaks and canoes. As early as 1984, however, Masters had begun to speak openly about vacating his role as President of the company he founded.[24]

In 1987, Perception's sales manager, Joe Pulliam, left the company to work for Blue Hole Canoe and eventually founded Dagger Canoe. Dagger emerged as the first serious competition for Perception, although Pulliam had a two-year non-compete agreement that initially kept Dagger out of kayaks and in canoes. In 1990 Dagger introduced its first kayak, the Response.

Masters would eventually exit Perception altogether when he sold the company to Crescent Capital, which then acquired Dagger, and both companies were put under the Watermark Paddlesports holding company. Watermark was eventually acquired by Confluence Holdings, an industry platform consolidating multiple kayak and canoe brands.[9]

In 2017, Masters was inducted into the International Whitewater Hall of Fame in the Pioneer Category. The ceremony was hosted in October, 2017 alongside the ACA National Paddlesports Conference in Bryson City, North Carolina, USA.

Peer Advisory Groups (aka Forums)

Bill Masters is a firm believer in educating, the development of entrepreneurial skills, and mentoring, especially young entrepreneurs.[25] He gives back by dedicating his time to numerous committees and boards, including Greenville Technical College Entrepreneurial Forum and writing a book to create and advocate for peer to peer advisory groups, Focus Forums™. He has recently served as Chair of South Carolina Research Authority, on the SC Council on Competitiveness Composites Cluster (2006), Liberty Fellows (2005), Board of Directors for SC Launch (2005), Furman University Foundation Board (2004) and Chair, Higher Education Task Force of The Governors Map Commission. Masters is a member of Young Presidents Organization (YPO), World Presidents Organization (WPO) and L3. He served on the YPO International Forum Advisory Board (YPO) and Chapter Forum Officer WPO.

Significant 3D Printing Patents

United States 4665492
Filed July 2, 1984
The first 3-D patent to shoot drops of plastic and make a part in the mid-1980s
Computer automated manufacturing process and system

United States 5134569
Filed June 26, 1989
3-D printing using extrusion
System and method for computer automated manufacturing using fluent material

United States 5216616
Filed December 1, 1989
3-D printing
System and method for computer automated manufacture with reduced object shape distortion

United States 5546313
Filed September 2, 1994
3-D printing using pin array
Method and apparatus for producing three-dimensional articles from a computer generated design

United States 5694324
Filed March 6, 1995
3-D printing suited for live cell building without damage
System and method for manufacturing articles using fluent material droplets

Other Patents

Patent NumberTitleFiling Date
US4227272Supportive framework for a boatJan 22, 1979
US4247279Rotational molding systemApr 18, 1980
US4440144Heater apparatus and methodAug 25, 1980
US4407216Frame system for kayakMay 14, 1981
US4421150Waterproof bag device for articlesJul 13, 1981
US4503799Combination flotation storage and seating structures for boatsApr 28, 1982
US4480579Kayak with adjustable rockerJul 14, 1982
US4489028Kayak improvementsNov 22, 1982
US4583480Kayak cockpit coverFeb 6, 1984
US4520747Breakaway kayak cockpit and methodFeb 27, 1984
US4589365Open-cockpit kayakOct 29, 1984
US4681060Kayak frame section and methodOct 7, 1985
US4744327Kayak foot braceSep 29, 1986
US4727821Detachable pod and kayakSep 29, 1986
US4715311Variable volume kayak hullApr 6, 1987
USD391916KayakMay 27, 1997
US4820216Adjustable kayak paddleJan 25, 1988
US4942840Foot brace for kayaksFeb 12, 1988
US4980112Method for rotational moldingJun 24, 1988
US5039297Rotational molding apparatusSep 13, 1989
US5094607Thermoplastic mold for rotational moldingNov 23, 1990
US5134964Flexible security loop for kayaksDec 31, 1990
US5189974Kayak catamaranJul 2, 1991
US5367975Kayak cockpit cover with retention edgeDec 14, 1992
US5855180Tilting dry dock for small watercraftMay 2, 1997
USD518431KayakJul 21, 2004
USD517974 Kayak HullJul 21, 2005
USD400155Boat handling slotsOct 27, 1998
USD524674Speaker timing deviceAug 23, 2005

Professional Organizations, Committees, and Non-profits

OrganizationDate(s)
Board Member, Meals on Wheels, Greenville2013-
Chair, South Carolina Research Authority2010-2012
Co-Chair, SC Council on Competitiveness Composites Cluster2006
Past Chair/ Chief Executive Boards International2006
Liberty Fellows Mentor2005-
Past Director, SC Launch Board2005-2007
Furman University, Foundation Board/ Richard Furman Society2004
Greenville Artisphere Festival Board Member2004
Chair, Higher Education Task Force, Governors MAP Commission2003
World Presidents Organization Forum Advisory Board2000-2003
World Presidents Organization, Rebel Chapter, Forum Officer2000-2003
Director, Cox Wood Products1999-2007
Young Presidents Organization International Forum Advisory Board1994-2001
Clemson University – Commission on the Future of Clemson1997-1998
Clemson University – Board of Visitors1997-1998
President, Pickens County Manufacturers Association1996
Furman University – Advisory Board1996
Chairman of the Board, BPM Technology, Inc.1992
Director, International Business Fellows1991-1994
Chairman, Charlotte Federal Reserve Bank Board1989-1990
Board of Directors, Charlotte Federal Reserve Bank Board1988-1994
Board of Directors, Association of Rotational Molders1983-1986
Small Business Advisory Council to the Federal Reserve, Bank of Richmond1985-1988
Chair, Technical Committee Association of Rotational Molders International1985
Chair, Marketing Committee Association of Rotational Molders International1984
Treasurer and Deacon, Easley Presbyterian Church1981-1986

Awards and honors

AwardDate
International Whitewater Hall of Fame Inductee - Pioneer 2017
Order of the Palmetto2016
Greenville Tech Entrepreneur Forum2004
Clemson University, Entrepreneurs Roundtable Associate (Professor Arthur M. Spiro Center for Entrepreneurial Leadership)1998
Entrepreneur of the Year Award, Society of International Business Fellows°1998
Olympic Mayor of the Whitewater Slalom Village for the 1996 Olympics1996
Inc Ernst/Young WINNER, “Entrepreneur of the Year” State of South Carolina1995
International Blue Chip Enterprise Award1994
Member, Business Leadership Forum, Democratic National Committee1994
Representative for SC Small Business, Executive Luncheon with the President and Vice President of the United States1993
Award for Outstanding Service, Boy Scouts of America, Blue Ridge Council1993
Leadership South Carolina1992
Director, Seniors Unlimited, Pickens County1988
Aspen Institute at Charlotte1987
Delegate, White House Conference on Small Business1986
SBA's Small Business Person of the Year for South Carolina1984

References

  1. Masters, William E. "Computer automated manufacturing process and system". Google. USPTO. Retrieved 11 April 2016.
  2. Clucas, David (April 21, 2014). "Confluence Watersports sold to J.H. Whitney, plans to expand outdoor business". SNEWS. Retrieved April 11, 2016.
  3. "Education, Enthusiasm, and Experience". Inc. Inc Magazine. January 1, 1997. Retrieved 11 April 2016.
  4. Terry T. Wohlers. "BPM Technology: Why the company failed". Wohlers Associates.
  5. Birnbaum, Jeffrey; Wessel, David (November 9, 1993). "Unlikely Allies - President is Wooing and Mostly Pleasing Big-Business Leaders". Wall Street Journal.
  6. Sayour, George. "How Perception Kayaks Changed the Kayaking Industry". About.com. Retrieved 11 April 2016.
  7. Opdahl, Cristina. "Splashmasters: Paddlers Who Set the High-Water Mark". Outside. Outside Magazine. Retrieved 11 April 2016.
  8. "Paddlers of the Century". Piney Paddlers. Retrieved 11 April 2016.
  9. Bousquin, Joe (27 August 1995). "Rival Kayak Makers Reunite After Sales to WaterMark". Wall Street Journal. Retrieved 27 March 2016.
  10. "Introduction to Additive Manufacturing" (PDF). National Institute of Standards Technology.
  11. "US Patent for Computer automated manufacturing process and system". United States Patent Office.
  12. "3D Printing Steps Into the Spotlight". Upstate Business Journal.
  13. Wang, Ben (1998). Concurrent Design of Products, Manufacturing Processes and Systems. Gordon and Breach Science Publishers. p. 147. ISBN 90-5699-628-2. Retrieved 27 March 2016.
  14. Ashley, Steven (7 July 1995). "Rapid prototyping is coming of age" (117). Mechanical Engineering. pp. 62–68. Retrieved 27 March 2016.
  15. Rudolph Bell (2007-05-27), Stroke of Genius, The Greenville News
  16. Paul Davidson (1996-07-28), Silicon Valley Meets Greenville, The Greenville News
  17. McCollum, Evelyn (September 1977). "Bill Masters: Boat Builder". Sandlapper: 37.
  18. Thompson, Samantha (26 March 1995). "Perception 'Masters' kayaks". Upstate Business Journal. p. 6.
  19. Anne Elizabeth Hydrick (1983-08-01). Bill Masters: Whitewater in His Blood. Greenville Magazine.
  20. Lindstrom, Ashley. "Selective Laser Sintering, Birth of an Industry". University of Texas, Cockrel School of Engineering. Retrieved 11 April 2016.
  21. Weld, John. "Meet Bill Masters: Perception's Master in Chief" (July/August 1997). American Whitewater. pp. 51–59.
  22. "Education, Enthusiasm, and Experience". Inc. Inc Magazine. Retrieved 11 April 2016.
  23. "New technologies have led kayak manufacturers to better, more durable building materials -- and increased sales". Rhode Island Higher Education Assistance Authority.
  24. Dennis Moore (1984-10-14). Diamond in the Rough. The State Magazine.
  25. Moore, John. "An entrepreneurial heritage". Upstate Business Journal. Retrieved 11 April 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.