Sting Ray (torpedo)

The Sting Ray is a British acoustic homing lightweight torpedo (LWT) manufactured by GEC-Marconi, who were later bought out by BAE Systems. It entered service in 1983.

Sting Ray
HMS Westminster (F237) fires a Sting Ray Training Variant Torpedo from the tubes adjacent to her hangar
TypeLightweight acoustic homing torpedo
Place of originUnited Kingdom
Service history
In service1983–present
Used byRoyal Navy
Royal Norwegian Navy
Royal Thai Navy
Romanian Navy
Production history
Designed1969–80
ManufacturerGEC-Marconi (Marconi Space and Defence Systems - MSDS), then Marconi Underwater Systems Ltd (MUSL) then BAE Systems Underwater Systems (part of BAE Systems Integrated System Technologies)
Specifications
Mass267 kg (589 lb)
Length2.6 m (8.5 ft)
Diameter324 mm (12.8 in)

Maximum firing range8 to 11 km (8,700 to 12,000 yd)
WarheadTorpex
Warhead weight45 kg (99 lb)

EngineElectrical pump-jet
Magnesium/silver-chloride batteries
Maximum speed 45 kn (83 km/h)
Guidance
system
Active and passive sonar
Launch
platform
Frigates, destroyers, helicopters, and Nimrod aircraft
Ship-launched training variant
A Merlin HM1 loaded with a Sting Ray torpedo

Design and development

In the 1950s the Royal Navy was equipped with British designed and built Mk 30 air-dropped torpedoes. These were passive homing weapons which relied on detecting the noise from submarine targets. However, as submarine noise levels decreased these weapons became ineffective. A design for a British Mk 31 torpedo which would have used active echo-location sonar failed to receive Government approval for production. US Mk 44 torpedoes were purchased for the Royal Navy in the 1960s to fill this role, and later replaced by US Mk 46 torpedoes.

A desire to not be dependent on US torpedo purchases led to a research programme starting in 1964 to develop a British torpedo. Initially designated Naval and Air Staff Requirement (NASR) 7511, it was (much later in the late 1970s) designated the Sting Ray torpedo.

Design

Design studies in the mid-1960s proposed that a tank of polyethylene oxide be carried behind the warhead. This polymer would be exuded at the nose to reduce the drag coefficient. Experiments using buoyancy-propelled torpedoes in 1969 had shown reductions in the drag coefficient up to 25%. However, by 1969 this scheme had been rejected in favour of carrying a larger battery.

The homing system developed in the mid-1960s incorporated a spinning magnetic disc onto which the acoustic correlation algorithms were etched but this was replaced by integrated circuit technology when the disc sometimes failed to survive the impact of the weapon with the sea from high altitude launches.

The original warhead concept was for a simple omnidirectional blast charge. However, studies in the 1970s showed that this would be inadequate against the large double-hulled submarines then entering service. A directed energy (shaped charge) warhead was used in the production weapon.

In 1976 the designs had to be completely revised. Swapping the project for buying a ready-made US torpedo was not considered because the torpedo was expected to be better, and was all-British. The project manager was Eric Risness CBE.

Manufacture

The torpedo was built at the MSDS (later MUSL) plants at Neston (in Cheshire) and MUSL in Farlington and Waterlooville near Portsmouth.[1] Guidance systems were made by Sperry Gyroscope Company.

Deployment

The original in-service version (Sting Ray Mod 0) is officially documented as entering service in 1983, although Mark Higgitt's book Through Fire and Water (2013), which tells the story of HMS Ardent during the Falklands conflict, states that operational Stingray torpedoes were transferred to the ship immediately prior to its sailing date of 19 April 1982 under conditions of great secrecy (pp. 56, 61). It is propelled by a pump jet driven by an electric motor. Power is supplied by a magnesium/silver-chloride sea water battery. The propulsion method combines high speed, deep diving, agility and low noise levels. The weapon is provided with target and environmental information by the launching platform. Once launched it operates autonomously, with tactical software searching for the target using active sonar and then homing in without any further assistance. The software is designed to deal with the employment of countermeasures by the target. The weapon is designed to be launched from fixed wing or rotary winged aircraft and surface ships against submarine targets.

The development of the torpedo cost £920 million. The Mark 24 Tigerfish submarine-launched torpedo had also overshot its initial budget.

Operators

Map with Sting Ray operators in blue

Current operators

 United Kingdom
 Norway
 Thailand
 Romania
 Morocco

Specifications

  • Length: 2.6 m (8.5 ft)
  • Diameter: 324 mm (12.8 in)
  • Weight: 267 kg (589 lb)
  • Warhead: 45 kg (99 lb) of HE in a shaped charge
  • Speed: 45 kn (83 km/h)
  • Range: 8 to 11 km (8,700 to 12,000 yd)
  • Depth: 800 m (2,600 ft)
  • Propulsion: Magnesium/silver chloride seawater battery (Pump-jet)
  • Guidance Active/Passive sonar

Dimensions

Sting Ray has a diameter of 324 mm (12.8 in) and a length of around 2.6 metres (8.5 feet). It has a launch weight of 267 kg (589 lb), and carries a 45 kg (99 lb) Torpex warhead. It has a speed of 45 kn (83 km/h) over a range of 8,000 m (8,700 yd; 4.3 nmi).

Sting Ray Mod 1 is intended for use against the same targets as Sting Ray Mod 0 but with an enhanced capability against small clad conventional submarines via a shaped-charge insensitive explosive warhead from TDW, and an improved shallow-water performance. It shares many hull components with the original weapon.

See also

References

  1. "Manufacturing plants". Archived from the original on 25 October 2012. Retrieved 22 May 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.