Armaguerra OG-43

The OG-43 and its subsequent version, OG-44, are submachine guns manufactured in small numbers in the Republic of Salo.

Armaguerra OG-43
An OG-44, version of OG-43 with fixed wooden stock
TypeSubmachine gun
Place of originItalian Social Republic
Service history
Used byItalian Social Republic
WarsWorld War II
Production history
DesignerGiovanni Oliani
ManufacturerSocietà Anonima Revelli Manifattura Armiguerra
VariantsOG-44
Specifications
Mass3.18 kg
Length720mm, 470 mm closed stock

Caliber9×19mm Parabellum
ActionBlowback
Rate of fire500 shots/min
Muzzle velocity~480 m/s
Maximum firing rangeeffective ~150 m max 200 m
Feed system40-round magazines

Origins and development

The OG-43, designed by Giovanni Oliani in the factory based in Cremona named Società Anonima Revelli Manifattura Armiguerra, was an advanced submachine gun, designed for compactness and ease of mass production. It is part of a family of weapons produced under emergency measures during the time of the Italian Social Republic, which include the TZ-45 machine gun, FNAB-43 and Isotta Fraschini. The next version, the OG-44, instead had a more traditional shape. The Ministry of War of the RSI had approved the construction, but it was never initiated as events unfolded.

Description

The OG-43 sported a very modern design, compared to its contemporaries. The receiver was made of stamped sheet metal, with the magazine serving as a grip. The bulk of the L-shaped bolt, along with the recoil spring, was housed in a cylinder directly above the barrel, which helped reduce muzzle climb when firing. The reciprocating cocking handle was located in the forward section of the bolt housing. The weapon was short-recoil blowback operated, and fired from an open bolt in both automatic and semi-automatic mode. Adjustable iron sights were fitted, with two possible settings for either 100m or 200m. Initially equipped with forward-folding metal stock, later production runs were fitted with simpler, wooden fixed stocks. It used the same double-stack magazines as the Beretta MAB 38, available in 10, 20, 30 or 40 rounds.

OG-44

The OG-44 version exhibited more traditional lines. It adopts the traditional wooden stock hinged to the pistol grip, positioned behind the trigger and the magazine well. It was slightly heavier than the OG-43, as well as the total length of 787 mm.

See also

Sources

  • Pierangelo Tendas, Armaguerra Cremona OG44


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.