Autonomous peripheral operation

In computing, autonomous peripheral operation is a hardware feature found in some modern microcontroller architectures to off-load certain tasks into embedded autonomous peripherals in order to minimize latencies and improve throughput in hard real-time applications as well as to save energy in ultra-low-power designs.

Overview

Forms of autonomous peripherals in microcontrollers were first introduced around 2005. Allowing embedded peripherals to work independently of the CPU and even interact with each other in certain pre-configurable ways off-loads event-driven communication into the peripherals to help improve the real-time performance due to lower latency and allows for potentially higher data throughput due to the added parallelism. Since 2009, the scheme has been improved in newer implementations to continue functioning in sleep modes as well, thereby allowing the CPU to remain dormant for longer periods of time in order to save energy. This is partially driven by the IoT market.[1]

Conceptually, autonomous peripheral operation can be seen as a generalization of and mixture between direct memory access (DMA) and hardware interrupts. Peripherals that issue event signals are called event generators or producers whereas target peripherals are called event users or consumers. In some implementations, peripherals can be configured to pre-process the incoming data and perform various peripheral-specific functions like comparing, windowing, filtering or averaging in hardware without having to pass the data through the CPU for processing.

Implementations

Known implementations include:

See also

References

  1. Pitcher, Graham (2014-01-28). "Things worthy of consideration - The Internet of Things is pushing microcontroller developers to move in unexpected directions". New Electronics. pp. 22–23. Archived from the original on 2018-05-10. Retrieved 2018-05-10.
  2. "XC800 Product Presentation - Capture Compare Unit CC6" (PDF). Infineon. May 2006. XC886 CC6 V1. Archived (PDF) from the original on 2018-05-10. Retrieved 2018-05-10. […] Drives need realtime performance – control loop must run faster than 2-4 PWM periods (e.g. 100-200us) – CPU performance is valuable and must be saved for key tasks – Question: How to offload the CPU? –Answer: Build intelligent and autonomous peripherals! […] CC6 in a Drive application: – generate PWM patterns for all kind of motors – operate always in a safe state – even in an error condition – interact with ADC for sensorless control of motors […] CC6 is used intensively – the more it works autonomous the more CPU load can be saved for control algorithms […]
  3. Faure, Philippe (2008-02-26). "Atmel's AVR XMEGA Redefines System Performance for 8/16-bit Microcontrollers" (Press announcement). Atmel. Archived from the original on 2018-05-01. Retrieved 2018-05-01.
  4. Bjørnerud, Rune André (2009). "Event System Implementations for Microcontroller Circuits". hdl:11250/2370969. Retrieved 2018-04-29.
  5. Andersen, Michael P.; Culler, David Ethan (2014-08-25). "System Design Trade-Offs in a Next-Generation Embedded Wireless Platform" (PDF) (Technical Report). Electrical Engineering and Computer Sciences, University of California at Berkeley. No. UCB/EECS-2014-162. Archived (PDF) from the original on 2018-04-30. Retrieved 2018-04-30.
  6. Perlegos, Helen (2009-06-22). "Atmel Introduces AVR32 Microcontroller Which Lowers Industry's Best Power Consumption by 63%" (Press announcement). Atmel. Archived from the original on 2018-04-30. Retrieved 2018-04-30.
  7. Eieland, Andreas; Krangnes, Espen (2012-10-28). "Improve Cortex M4 MCU interrupt responses with an intelligent Peripheral Event System". Atmel Corp. Archived from the original on 2018-04-30. Retrieved 2018-04-30.
  8. "Raising Performance Without Breaking the Power Budget". Digikey. 2013-07-10. Archived from the original on 2018-05-02. Retrieved 2018-05-01.
  9. Bush, Steve (2009-07-08). "Energy Micro reveals more details on power efficient ARM MCU". Electronics Weekly. Archived from the original on 2018-04-30. Retrieved 2018-04-30.
  10. Bush, Steve (2009-10-21). "Energy Micro details its ARM Cortex M3-based EFM32G range". Electronics Weekly. Archived from the original on 2018-04-30. Retrieved 2018-04-29.
  11. "ZILOG Releases New 16-Bit MCU System On A Chip For Motor Control Applications". BusinessWire. 2011-01-06. Archived from the original on 2018-05-02. Retrieved 2018-05-01.
  12. Coulson, Dave (2011-10-12). "The Need for Autonomous Peripheral Interoperation in Sensorless BLDC Applications". Convergence Promotions LLC. Archived from the original on 2018-05-01. Retrieved 2018-05-01.
  13. Elahi, Junaid; Rusten, Joar Olai; Olsen, Lasse; Sundell, Lars (2011-12-12). "Programmable peripheral interconnect". Nordic Semiconductor ASA. US patent US9087051B2. Retrieved 2018-04-29.
  14. Bauer, Peter; Schäfer, Peter; Zizala, Stephan (2012-01-23). "One microcontroller platform. Countless solutions. XMC4000" (PDF) (Presentation). International Press Conference, Am Campeon, Munich, Germany: Infineon. Archived (PDF) from the original on 2018-05-10. Retrieved 2018-05-10.
  15. Manners, David (2012-10-03). "Lowest power 32-bit MCUs from Si Labs". Electronics Weekly. Archived from the original on 2018-05-02. Retrieved 2018-05-01.
  16. Silicon Laboratories. "Low Power Technology: Microcontroller Peripherals Push the Boundaries of Ultra-Low-Power". Retrieved 2018-05-01.
  17. Kragnes, Espen; Eieland, Andreas (2012). "Redefining the Power Benchmark" (PDF) (White Paper). Atmel. Archived (PDF) from the original on 2018-05-01. Retrieved 2018-05-01.
  18. "Freescale Energy-Efficient Solutions: Kinetis L Series MCUs" (PDF) (White paper). Freescale. 2012. Archived (PDF) from the original on 2018-05-03. Retrieved 2018-05-03.
  19. Riemenschneider, Frank (2013-06-18). "Mikrocontroller: Neue Cortex-M0+-Familie von Atmel" (in German). elektroniknet.de. Archived from the original on 2018-04-30. Retrieved 2018-04-29.
  20. "A closer look at Atmel's Peripheral Event System". Archived from the original on 2018-05-01. Retrieved 2018-05-01.
  21. Quinnell, Rich (2015-07-28). "8-bit Fights Back with Autonomous Peripherals". Santa Clara, USA: EETimes. Archived from the original on 2018-04-30. Retrieved 2018-04-30.
  22. Bush, Steve (2016-10-31). "Autonomous peripherals for PIC18F MCUs". Electronics Weekly. Archived from the original on 2018-04-30. Retrieved 2018-04-29.
  23. Stroh, Iris (2016-11-10). "Microchip Technology: 8-Bit-Offensive: AVR" (in German). elektroniknet.de. Archived from the original on 2018-04-30. Retrieved 2018-04-29.
  24. Di Jasio, Lucio (2015-05-05). "There is nothing left to be invented in embedded control, Part 1". Archived from the original on 2018-05-01. Retrieved 2018-05-01.
  25. Di Jasio, Lucio (2015-05-12). "There is nothing left to be invented in embedded control, Part 2". Archived from the original on 2018-05-01. Retrieved 2018-05-01.
  26. "Peripherals interconnections on ST M32F405/7xx, STM32F415/7xx, STM32F42xxx, STM32F43xxx, STM32F446xx and STM32F469/479xx" (PDF) (Application note). STMicroelectronics. AN4640. Archived (PDF) from the original on 2018-05-01. Retrieved 2018-05-01.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.