Bowling pin

Bowling pins (historically known as skittles or kegels) are the target of the bowling ball in various bowling games including tenpins, five-pins, duckpins and candlepins.

Scale diagram of bowling pins and balls for several variants of the sport, with the horizontal blue lines being one inch apart vertically.

Tenpins

Ten-pin bowling pins shown at different stages of manufacture. From right to left: a lathe shapes a pin from a block of wood before it is coated with plastic. Inner voids (spaces affecting center of gravity and tipping point) are also visible.[1]

Pin specifications are set by the United States Bowling Congress (USBC). World Bowling, formerly World Tenpin Bowling Association, has adopted the USBC specifications. Pins are 4.75 inches (121 mm) wide at their widest point and 15 inches (380 mm) tall. They weigh between 3 pounds 6 ounces (1.5 kilograms) and 3 lb 10 oz (1.6 kg). The weight of the pin was originally based on the idea that a single pin should be around 24 percent the weight of the heaviest bowling ball within regulation, 16 lb 0 oz (7.3 kg).

Duckpins and fivepins

Much-used duckpins on display

Duckpins are shorter and squatter than standard tenpins. Canadian fivepins are between duckpins and tenpins in size, but have a thick, inch-wide rubber band around the widest part of the pin to increase pin action when struck.

Candlepins

A full rack of ten candlepins, with the sport's small ball.

Candlepins are dissimilar to the others, being the tallest of all at 15-3/4 inches (40 cm), but only 2-15/16 inches wide and 2 lb 8 oz (1.1 kg) in weight, each pin nearly matching the maximum weight of a candlepin ball.[2] They are nearly cylindrical in shape with a slight taper toward either end, making them vaguely resemble candles (hence the name). Unlike other bowling pins, because they are vertically symmetrical, candlepins may be set on either end. Due to their width and construction, candlepins tends to produce a billiard ball-like sound when struck.

Kegels

Kegel pins and ball

Pins used in the German bowling game kegel appears to combine the design of tenpins and duckpins. The overall shape of the pin resembles a standard ten-pin bowling pins, and its small size is comparable to duckpins. Similar to five-pin bowling, these pins have strings attached on top of each, which connects them to the pinsetter.

Pin construction

Bowling pins are constructed by gluing blocks of rock maple wood into the approximate shape, and then turning on a lathe. After the lathe shapes the pin, it is coated with a plastic material, painted, and covered with a glossy finish. Because of the scarcity of suitable wood, bowling pins can be made from approved synthetics. Currently there are synthetic pins sanctioned for play in five-pin, duckpin, and candlepin. There is one synthetic ten pin model approved by the USBC. When hit by the ball, synthetic pins usually sound different from wooden pins.

Juggling clubs could be mistaken for bowling pins due to their similar shape. The two differ greatly in construction and weight.

See also

References

  1. Photo taken at the International Bowling Museum in Arlington, Texas, U.S.
  2. International Candlepin Bowling Association (June 2010). "Candlepin Bowling Rules". Retrieved 3 December 2014.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.