c-chart

In statistical quality control, the c-chart is a type of control chart used to monitor "count"-type data, typically total number of nonconformities per unit.[1] It is also occasionally used to monitor the total number of events occurring in a given unit of time.

c-chart
Originally proposed byWalter A. Shewhart
Process observations
Rational subgroup sizen > 1
Measurement typeNumber of nonconformances in a sample
Quality characteristic typeAttributes data
Underlying distributionPoisson distribution
Performance
Size of shift to detect≥ 1.5σ
Process variation chart
Not applicable
Process mean chart
Center line
Control limits
Plotted statistic

The c-chart differs from the p-chart in that it accounts for the possibility of more than one nonconformity per inspection unit, and that (unlike the p-chart and u-chart) it requires a fixed sample size. The p-chart models "pass"/"fail"-type inspection only, while the c-chart (and u-chart) give the ability to distinguish between (for example) 2 items which fail inspection because of one fault each and the same two items failing inspection with 5 faults each; in the former case, the p-chart will show two non-conformant items, while the c-chart will show 10 faults.

Nonconformities may also be tracked by type or location which can prove helpful in tracking down assignable causes.

Examples of processes suitable for monitoring with a c-chart include:

The Poisson distribution is the basis for the chart and requires the following assumptions:[2]

  • The number of opportunities or potential locations for nonconformities is very large
  • The probability of nonconformity at any location is small and constant
  • The inspection procedure is same for each sample and is carried out consistently from sample to sample

The control limits for this chart type are where is the estimate of the long-term process mean established during control-chart setup.

See also

References

  1. "Counts Control Charts". NIST/Sematech Engineering Statistics Handbook. National Institute of Standards and Technology. Retrieved 2008-08-23.
  2. Montgomery, Douglas (2005). Introduction to Statistical Quality Control. Hoboken, New Jersey: John Wiley & Sons, Inc. p. 289. ISBN 978-0-471-65631-9. OCLC 56729567. Archived from the original on 2008-06-20. Retrieved 2008-08-23.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.