Canon FL lens mount

Canon FL refers to a lens mount standard for 35mm single-lens reflex cameras from Canon. It was introduced in April 1964 with the Canon FX camera, replacing the previous Canon R lens mount. The FL mount was in turn replaced in 1971 by the Canon FD lens mount. FL lenses can also be used on FD-mount cameras.

Canon FX with FL 50mm f/1.8

Many mirrorless interchangeable-lens cameras are able to use Canon FL lenses via an adapter.

FL cameras

FL lenses

The difference between Canon FL (28mm) Lens and Super-Canomatic Lens R and mechanical couplings for aperture(50mm)

Zoom

Focal length(s) Aperture range Macro
55-135mm 3.5  No
85-300mm 5  No
100-200mm 5.6  No

Wide-angle (under 50mm)

Focal length(s) Aperture range Macro
19mm 3.5  No
19mm R 3.5  No
28mm 3.5  No
35mm 2.5  No
35mm 3.5  No
P 38mm 2.8  No

Standard (50–60mm)

FL 58mm f/1.2

Source:[1]

Canon released 3 'levels' of standard lenses (exc. macro). The f/1.8 lenses were small and lightweight, f/1.4 were mid-range, and the f/1.2 were professional level (top of their line).

Focal length(s) Aperture range Macro Elements
50mm 1.4 (1965)  No 6
50mm I 1.4 (1966)  No 6
50mm II 1.4 (1968)  No 7
50mm 1.8 (1964)  No 6
50mm II 1.8 (1968)  No 6
50mm M 3.5  Yes 4
55mm 1.2 (1968)  No 7
58mm I 1.2 (1964)  No 7
58mm II 1.2 (1968)  No 7

Telephoto (above 60mm)

FL 200mm f/4.5
Focal length(s) Aperture range Macro Super Spectra Coating (SSC)
85mm 1.8  No  No
100mm 3.5  No  No
M 100mm 4  Yes  No
135mm 2.5  No  No
135mm 3.5  No  No
200mm 3.5 I  No  No
200mm 3.5 II  No  No
200mm 4.5  No  No
300mm 2.8  No  Yes
300mm 5.6  No  No
400mm 5.6  No  No
500mm 5.6  No  No
600mm 5.6  No  No
800mm 8  No  No
1200mm 11  No  No

Notes

  1. The FL 19mm F3.5 (not the 19mm F3.5 R) was a true wide angle (short focus) lens. Its rear projected far into the mirror box on an SLR, and because of this, it could only be used on a camera with mirror lock-up (FP, FX, FT, F-1 (old), FTb, EF). It could not be used on either Pellix model.
  2. The FL P 38mm F2.8 also projected into the mirror box. It was specially designed for the Pellix and could not be used on any other camera because the moving mirror would hit the rear of the lens. This lens had a longer lens mount index (the pin on the back or the lens at the top), that only fit the deeper cutout at the top of the Pellix's lens mount, thus making it impossible to mount this lens on any other camera.
  3. the FL M 100mm F4 was a special purpose bellows lens. It could only be used when mounted on a bellows, such as the Bellows FL, because it lacked a focusing ring.
  4. The list is complete.

See also

Canon

Single lens reflex

References

  1. "Canon Camera Museum". Canon Camera Museum. 9 January 2018. Retrieved 9 January 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.