Cei-Rigotti

The Cei-Rigotti (also known as the Cei gas rifle[1]) is an early automatic rifle created in the final years of the 19th century by Amerigo Cei-Rigotti, an officer in the Royal Italian Army. Although the rifle was never officially adopted by any military, it was tested extensively by the Italian Army during the lead-up to the First World War[2]

Cei-Rigotti
TypeSelective-fire rifle
Place of origin Kingdom of Italy
Production history
DesignerAmerigo Cei-Rigotti
Designedc. 1890
Specifications
Mass4.3 kg (9.5 lb)
Length1,000 mm (39 in)
Barrel length482.6 mm (19.00 in)

Cartridge6.5×52mm Mannlicher–Carcano
7.65x53mm Mauser
ActionGas piston, self-loading
Rate of fireUp to 900 rpm
Muzzle velocity730 m/s (2,400 ft/s)
Maximum firing range1,400 m (1,500 yd)
Feed system10-, 20- and 50-round fixed box magazine
SightsIron sights

Description

This circa 1900 photo shows an Italian soldier demonstrating charging and firing a standard and high capacity version of the Cei-Rigotti rifle.
The Cei-Rigotti rifle field stripped.

The rifle was gas operated and had selective fire capabilities (single shots or fully automatic). Available information on this gun is sparse and often contradictory.

According to several publications, the prototype rifle was chambered for the 6.5×52mm Mannlicher–Carcano.[3] The gun was supposedly presented by Cei-Rigotti to his superiors in a private demonstration in 1895. An Italian newspaper reported on this event in 1900.[4] According to another source, a demonstration was actually held publicly in Rome on June 13, 1900, when 300 rounds were fired on full automatic before the gun got so hot it seized up.[5] Yet another source mentions a demonstration in the same year at the Brescia Arsenal.[6]

The British also ordered and tested the gun after this event, but they found it unsuitable.[4] The rifle found at the UK National Firearms Centre in Leeds is chambered in 7.65x53mm Mauser, as is another example found in a U.S. private collection.[7]

One unusual feature of the Cei-Rigotti was its trigger, which extended through a slot across the entirety of the trigger guard. The purpose of this design is unknown, although it has been theorized that it was intended to make the weapon easier to operate in heavy gloves.[8] The trigger guard assembly was also connected to the magazine, and needed to be removed in order for the magazine to be replaced.[9] This magazine is also a major point of contention among military historians, as, since the weapon was reloaded via stripper clips rather than detachable magazine, many argue that it disqualifies the Cei-Rigotti from being classified as an assault rifle.[10] Reportedly, prototypes with magazines up to a capacity of 50 rounds existed.[3]

See also

References

  1. Daniel D. Musgrave; Thomas B. Nelson (1967). The World's Assault Rifles and Automatic Carbines. T. B. N. Enterprises. p. 225.
  2. https://www.forgottenweapons.com/early-semiauto-rifles/cei-rigotti/
  3. David Westwood (2005). Rifles: An Illustrated History Of Their Impact. ABC-CLIO. p. 364. ISBN 978-1-85109-401-1.
  4. David Miller (2003). The illustrated directory of twentieth century guns. Zenith Imprint. pp. 224–225. ISBN 978-0-7603-1560-6.
  5. W. H. B, Smith and Joseph E. Smith, The Book of Rifles, 1948, National Rifle Association, p. 68
  6. Ian V. Hogg (1978). The complete illustrated encyclopedia of the world's firearms. A & W Publishers. p. 108. ISBN 978-0-89479-031-7.
  7. McCollum, Ian (October 24, 2012). "Cei-Rigotti". ForgottenWeapons.com. Retrieved July 12, 2013.
  8. https://www.forgottenweapons.com/early-semiauto-rifles/cei-rigotti/
  9. https://www.forgottenweapons.com/early-semiauto-rifles/cei-rigotti/
  10. https://www.thefirearmblog.com/blog/2014/04/02/sturmgewehr-assault-rifle-developments-prior-1942/
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.