Ceinture 5001 to 5012

Specifications
Configuration:;
• Whyte	2-10-2T
• UIC	1′E1′ h2t
Gauge	1,435 mm (4 ft 8 1⁄2 in)
Leading dia.	800 mm (31 1⁄2 in)
Driver dia.	1,350 mm (4 ft 5 1⁄8 in)
Trailing dia.	800 mm (31 1⁄2 in)
Length	15.530 metres (50 ft 11 3⁄8 in)
Loco weight	Empty: 90.7 tonnes (89.3 long tons; 100.0 short tons); Loaded 114.8 tonnes (113.0 long tons; 126.5 short tons);
Firebox:; • Firegrate area	3.55 m2 (38.2 sq ft)
Boiler pressure	12 kg/cm2 (1.18 MPa; 171 psi)
Feedwater heater	ACFI
Heating surface	167 m2 (1,800 sq ft)
Superheater:;
• Type	5P4 type
• Heating area	89 m2 (960 sq ft)
Cylinders	Two, outside
Cylinder size	630 mm × 660 mm (24 13⁄16 in × 26 in)

Type and origin
Power type	Steam
Designer	Henschel & Sohn and Corpet-Louvet
Builder	Corpet-Louvet
Serial number	1749, 1774–1783
Build date	1928 (1), 1930 (11)
Total produced	12

Ceinture 5001–5012; Nord 5.301 – 5.312; SNCF 2-151.TA
Type and origin
Power type	Steam
Designer	Henschel & Sohn and Corpet-Louvet
Builder	Corpet-Louvet
Serial number	1749, 1774–1783
Build date	1928 (1), 1930 (11)
Total produced	12
Specifications
Configuration:;
• Whyte	2-10-2T
• UIC	1′E1′ h2t
Gauge	1,435 mm (4 ft 8 1⁄2 in)
Leading dia.	800 mm (31 1⁄2 in)
Driver dia.	1,350 mm (4 ft 5 1⁄8 in)
Trailing dia.	800 mm (31 1⁄2 in)
Length	15.530 metres (50 ft 11 3⁄8 in)
Loco weight	Empty: 90.7 tonnes (89.3 long tons; 100.0 short tons); Loaded 114.8 tonnes (113.0 long tons; 126.5 short tons);
Firebox:; • Firegrate area	3.55 m2 (38.2 sq ft)
Boiler pressure	12 kg/cm2 (1.18 MPa; 171 psi)
Feedwater heater	ACFI
Heating surface	167 m2 (1,800 sq ft)
Superheater:;
• Type	5P4 type
• Heating area	89 m2 (960 sq ft)
Cylinders	Two, outside
Cylinder size	630 mm × 660 mm (24 13⁄16 in × 26 in)
Performance figures
Maximum speed	70 km/h (43 mph)
Power output	1,300 CV (960 kW; 1,300 hp)
Career
Operators	Ceinture; Nord; SNCF;
Numbers	Ceinture: 5001–5012; Nord: 5.301 – 5.312; SNCF: 2-151.TA.1 – 2-151.TA.12;
Retired	1962–1965
Current owner	all scrapped

Ceinture 5001 to 5012 were a class of 2-10-2T tank locomotives of the Syndicat d'Exploitation des Chemins de fer de Ceinture de Paris. They were used for hauling freight trains on the Grande Ceinture line in Paris, and later the Région Nord.

The locomotives were designed jointly by the firm of Corpet-Louvet and Henschel & Sohn, and were based on the Prussian T 20.[1] They were delivered to the Ceinture between 1928 and 1930, who numbered them 5001 to 5012.

In 1934, at the dissolution of the Syndicat, they transferred to the Chemins de fer du Nord who renumbered them 5.301 to 5.312.

In 1938, at the creation of the SNCF, the became 2-151.TA.1 to 2-151.TA.12. The SNCF ordered a further 22 of this type, but with the higher boiler pressure of 14 kg/cm² (1.37 MPa; 199 psi), as the 151.TQ type.[1]

They were retired between 1962 and 1965. None have been preserved.

Table of retirements
Year	Quantity in service at start of year	Quantity withdrawn	Fleet numbers
1962	12	3	151.TA.2, 3, 10
1963	9	4	151.TA.1, 4, 5, 6
1964	5	3	151.TA.7, 9, 12
1965	2	2	151.TA.8, 11

References

Davies 1997, p. 158.

Davies, John (January 1997). Chemins de fer du Nord Locomotive List 1842–1938. Sunnybank, Queensland: Dr. John Davies. p. 158. ISBN 0-646-30938-2.

Ceinture 5001 to 5012

References

See also