Cell microprocessor implementations

The first commercial Cell microprocessor, the Cell BE, was designed for the Sony PlayStation 3. IBM designed the PowerXCell 8i for use in the Roadrunner supercomputer.[1]

Implementation

First edition Cell on 90 nm CMOS

IBM has published information concerning two different versions of Cell in this process, an early engineering sample designated DD1, and an enhanced version designated DD2 intended for production.

Known Cell variants in 90 nm process
DesignationDie areaFirst disclosedEnhancement
DD1221 mm2ISSCC 2005
DD2235 mm2Cool Chips April 2005Enhanced PPE core

The main enhancement in DD2 was a small lengthening of the die to accommodate a larger PPE core, which is reported to "contain more SIMD/vector execution resources". Some preliminary information released by IBM references the DD1 variant. As a result, some early journalistic accounts of the Cell's capabilities now differ from production hardware.

Cell floorplan

Powerpoint material accompanying an STI presentation given by Dr Peter Hofstee], includes a photograph of the DD2 Cell die overdrawn with functional unit boundaries which are also captioned by name, which reveals the breakdown of silicon area by function unit as follows:


Cell function units and footprint
Cell function unitArea (%)Description
XDR interface5.7Interface to Rambus system memory
memory controller4.4Manages external memory and L2 cache
512 KiB L2 cache10.3Cache memory for the PPE
PPE core11.1PowerPC processor
test2.0Unspecified "test and decode logic"
EIB3.1Element interconnect bus linking processors
SPE (each) × 86.2Synergistic coprocessing element
I/O controller6.6External I/O logic
Rambus FlexIO5.7External signalling for I/O pins

SPE floorplan

Additional details concerning the internal SPE implementation have been disclosed by IBM engineers, including Peter Hofstee, IBM's chief architect of the synergistic processing element, in a scholarly IEEE publication.

This document includes a photograph of the 2.54 × 5.81 mm SPE, as implemented in 90-nm SOI. In this technology, the SPE contains 21 million transistors of which 14 million are contained in arrays (a term presumably designating register files and the local store) and 7 million transistors are logic. This photograph is overdrawn with functional unit boundaries, which are also captioned by name, which reveals the breakdown of silicon area by function unit as follows:

SPU function units and footprint
SPU function unitArea (%)DescriptionPipe
single precision10.0single precision FP execution uniteven
double precision4.4double precision FP execution uniteven
simple fixed3.25fixed point execution uniteven
issue control2.5feeds execution units
forward macro3.75feeds execution units
GPR6.25general purpose register file
permute3.25permute execution unitodd
branch2.5branch execution unitodd
channel6.75channel interface (three discrete blocks)odd
LS0–LS330.0four 64 KiB blocks of local storeodd
MMU4.75memory management unit
DMA7.5direct memory access unit
BIU9.0bus interface unit
RTB2.5array built-in test block (ABIST)
ATO1.6atomic unit for atomic DMA updates
HB0.5obscure

Understanding the dispatch pipes is important to write efficient code. In the SPU architecture, two instructions can be dispatched (started) in each clock cycle using dispatch pipes designated even and odd. The two pipes provide different execution units, as shown in the table above. As IBM partitioned this, most of the arithmetic instructions execute on the even pipe, while most of the memory instructions execute on the odd pipe. The permute unit is closely associated with memory instructions as it serves to pack and unpack data structures located in memory into the SIMD multiple operand format that the SPU computes on most efficiently.

Unlike other processor designs providing distinct execution pipes, each SPU instruction can only dispatch on one designated pipe. In competing designs, more than one pipe might be designed to handle extremely common instructions such as add, permitting more two or more of these instructions to be executed concurrently, which can serve to increase efficiency on unbalanced workflows. In keeping with the extremely Spartan design philosophy, for the SPU no execution units are multiply provisioned.

Understanding the limitations of the restrictive two pipeline design is one of the key concepts a programmer must grasp to write efficient SPU code at the lowest level of abstraction. For programmers working at higher levels of abstraction, a good compiler will automatically balance pipeline concurrency where possible.

SPE power and performance

As tested by IBM under a heavy transformation and lighting workload [average IPC of 1.4], the performance profile of this implementation for a single SPU processor is qualified as follows:

Relationship of speed to temperature
Voltage (V)Frequency (GHz)Power (W)Die temp. (°C)
0.92.0125
0.93.0227
1.03.8331
1.14.0438
1.24.4747
1.35.01163

The entry for 2.0 GHz operation at 0.9 V represents a low power configuration. Other entries show the peak stable operating frequency achieved with each voltage increment. As a general rule in CMOS circuits, power dissipation rises in a rough relationship to V2F, the square of the voltage times the operating frequency.

Though the power measurements provided by the IBM authors lack precision they convey a good sense of the overall trend. These figures show the part is capable of running above 5 GHz under test lab conditions—though at a die temperature too hot for standard commercial configurations. The first Cell processors made commercially available were rated by IBM to run at 3.2 GHz, an operating speed where this chart suggests a SPU die temperature in a comfortable vicinity of 30 degrees.

Note that a single SPU represents 6% of the Cell processor's die area. The power figures given in the table above represent just a small portion of the overall power budget.

IBM has publicly announced their intention to implement Cell on a future technology below the 90 nm node to improve power consumption. Reduced power consumption could potentially allow the existing design to be boosted to 5 GHz or above without exceeding the thermal constraints of existing products.

Cell at 65 nm

The first shrink of Cell was at the 65 nm node. The reduction to 65 nm reduced the existing 230 mm2 die based on the 90 nm process to half its current size, about 120 mm2, greatly reducing IBM's manufacturing cost as well.

On 12 March 2007, IBM announced that it started producing 65 nm Cells in its East Fishkill fab. The chips produced there are apparently only for IBMs own Cell blade servers, which were the first to get the 65 nm Cells. Sony introduced the third generation of the PS3 in November 2007, the 40GB model without PS2-compatibility which was confirmed to use the 65 nm Cell. Thanks to the shrunk Cell, power consumption was reduced from 200 W to 135 W.

At first it was only known that the 65 nm-Cells clock up to 6 GHz and run on 1.3 V core voltage, as demonstrated on the ISSCC 2007. This would have given the chip a theoretical peak performance of 384 GFLOPS in FP8 quarter precision (48 GFLOPs in FP64 dual precision), a significant improvement to the 204.8 GFLOPS peak (25.6 GFLOPs FP64 dual precision) that a 90 nm 3.2 GHz Cell could provide with 8 active SPUs. IBM further announced it implemented new power-saving features and a dual power supply for the SRAM array. This version was not yet the long-rumoured "Cell+" with enhanced Double Precision floating point performance, which first saw the light of day mid-2008 in the Roadrunner supercomputer in the form of QS22 PowerXCell blades. Although IBM talked about and even showed higher-clocked Cells before, clock speed has remained constant at 3.2 GHz, even for the double precision enabled "Cell+" of the Roadrunner. By keeping clockspeed constant, IBM has instead opted to reduce power consumption. PowerXCell clusters even best IBMs Blue Gene clusters (371 MFLOPS/watt), which are far more power-efficient already than clusters made up of conventional CPUs (265 MFLOPS/watt and lower).

Prospects at 45 nm

At ISSCC 2008, IBM announced Cell at the 45 nm node. IBM said it would require 40 percent less power at the same clockspeed than its 65 nm predecessor and that the die area would shrink by 34 percent. The 45 nm Cell requires less cooling and allows for cheaper production, also through the use of a much smaller heatsink. Mass production was initially slotted to begin in late 2008 but was moved to early 2009.

Prospects beyond 45 nm

Sony, IBM and Toshiba announced to begin work on a Cell as small as 32 nm in January 2006, but since process shrinks in fabs usually happen on a global and not an individual chip scale, this was merely as a public commitment to take Cell to 32 nm.

References

  1. Kevin J. Barker, Kei Davis, Adolfy Hoisie, Darren J. Kerbyson, Mike Lang, Scott Pakin, Jose C. Sancho. "Entering the Petaflop Era:The Architecture and Performance of Roadrunner".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.