Committed information rate

In a Frame Relay network, committed information rate (CIR) is the bandwidth for a virtual circuit guaranteed by an internet service provider to work under normal conditions. Committed data rate (CDR) is the payload portion of the CIR.[1]

At any given time, the available bandwidth should not fall below this committed figure. The bandwidth is usually expressed in kilobits per second (kbit/s).

Above the CIR, an allowance of burstable bandwidth is often given, whose value can be expressed in terms of additional rate, known as the excess information rate (EIR), or as its absolute value, peak information rate (PIR).[lower-alpha 1] The provider guarantees that the connection will always support the CIR rate, and sometimes the EIR rate provided that there is adequate bandwidth. The PIR, i.e. the CIR plus EIR, is either equal to or less than the speed of the access port into the network. Frame Relay carriers define and package CIRs differently, and CIRs are adjusted with experience.

See also

Notes
  1. The relationship is: PIR=CIR+EIR

References
  1. This article is based on material taken from Committed Data Rate at the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.