Dalby railway station

Dalby railway station is located on the Western line in Queensland, Australia, serving the town of Dalby. The station has one platform with a passing loop and opened on 16 April 1868.[1] The Dalby station has had 3 station building over its lifetime, the first built at the western end of the platform. This was removed and a new building built at the eastern end of the platform so that an additional platform could be constructed to service the newly created branch lines to Tara, Jandowae and Bell. The wooden station building built in 1913 was burned down in 1930, to be replaced later in that year by a pre-cast concrete building using the same foundations and floor plan of the original building.

Dalby
Station front in July 2013
Location	2 Hunter Street, Dalby
Coordinates	27.1798°S 151.2715°E / -27.1798; 151.2715
Owned by	Queensland Rail
Operated by	Traveltrain
Line(s)	Western
Platforms	1 (plus one disused)
Tracks	2
Construction
Structure type	Single Story Precast concrete
Parking	5 inc 1 disabled
Disabled access	Yes
Other information
Status	Building occupied by Western Downs Outreach Project Inc. Passenger services stop Wed/Fri 1.17am westbound and Thurs/Sat 4:47am eastbound. Platform access is via the ramp on the west side of the station building.
History
Opened	20 April 1868
Rebuilt	1914 for the provision of a second platform to service branch lines. Was again rebuilt after a fire in 1930
Electrified	No
Services
Preceding station Queensland Rail Following station Oakey towards Brisbane The Westlander Chinchilla towards Charleville

As of 1 December 2015 the building is occupied by the community group "Western Downs Outreach Project".[2] The station building is now used as a community lounge that is open six days a week. A soup kitchen operates on Monday, Thursday & Saturday nights. Markets are held at front and within the station building on the first Sunday of each month. All proceeds are used to restore the building and continue the soup kitchen.[2]