Design Manual for Roads and Bridges

The Design Manual for Roads and Bridges (DMRB) is a series of 15 volumes that provide standards, advice notes and other documents relating to the design, assessment and operation of trunk roads, including motorways in the United Kingdom, and, with some amendments, the Republic of Ireland. It also forms the basis of the road design standards used in many other countries.

The DMRB is used to design trunk roads such as the A20 in the UK.

DMRB volumes form part of a suite of technical documents produced by Highways England, which comprises:

  • Design Manual for Roads and Bridges (DMRB)
  • Manual of Contract Documents for Highway Works (MCHW)
  • Asset Maintenance and Operation Requirements (AMOR) which supersedes the Network Maintenance Manual and Routine and Winter Service Codes, and its predecessor the Trunk Road Maintenance Manual

Overview

The volumes within the Design Manual for Roads and Bridges are:[1]

Volume 0 - Introduction and General requirements
Volume 1 - Highway Structures: Approval Procedures and General Design
Volume 2 - Highway Structures: Design (Substructures and Special Structures), Materials
Volume 3 - Highway Structures: Inspection and Maintenance
Volume 4 - Geotechnics and Drainage
Volume 5 - Assessment and Preparation of Road Schemes
Volume 6 - Road Geometry
Volume 7 - Pavement Design and Maintenance
Volume 8 - Traffic Signs and Lighting
Volume 9 - Traffic Control and Communications
Volume 10 - Environmental Design
Volume 11 - Environmental Assessment
Volume 12 - Traffic Appraisal of Road Schemes
Volume 13 - Economic Assessment of Road Schemes [Volume Withdrawn]
Volume 14 - Economic Assessment of Road Maintenance [Volume Withdrawn]
Volume 15 - Economic Assessment of Road Schemes in Scotland

The individual volumes contain technical requirements and guidance on a wide range of highway related topics, necessary to deliver works on the Strategic Road Network[2]

Specific Subjects

Scheme appraisal

In terms of scheme appraisal, the cost-benefit and environmental impact assessment methods set out in DMRB provide important inputs into the approach used to appraise new road schemes, including the former New Approach to Appraisal.

Safety barriers (road restraint systems)

The approach to safety barriers was revised in 2005/06 from a prescriptive approach to a risk assessment-based system (Road Restraints Risk Assessment Process (RRRAP)).[3] TD 19/06 - "Requirements for Road Restraint Systems"[4] was issued and the safety barrier drawings in Volume 3 of the Manual of Contract Documents for Highways Works were withdrawn, to be replaced by Highways Agency accepted EN 1317 Road Restraint Systems list.[5]

Timeline

When the DMRB was originally published in 1992 it only covered roads in England and Wales. Its remit was subsequently extended to include roads in Scotland and Northern Ireland. DMRB is managed by the Highways England on behalf of the agencies responsible for trunk roads in Scotland, Wales and Northern Ireland, however the requirements given may be subject to regional variations.

In 1992 it was published as loose leaf set of documents in lever arch files. In 2002 the DMRB was made freely available on the internet at.[6] Paper copies in the lever arch folders continued to be available to purchase as well as copies available on compact discs.

2015 review

In 2015 as part of the Protocol[7] attached to the licence for Highways England Ltd to be the Strategic Highways Company, there was a requirement to review the structure, usability and content of the DMRB by March 2020. Highways England appointed WSP to assist with thought leadership on what these changes should be. Between April 2015 and March 2016 a wide ranging stakeholder consultation and developed a number of recommendations. The first of the new format documents were published in June 2018.[8]

Use in Republic of Ireland

Rather than create a separate design manual for roads in the Republic of Ireland, the UK's Design Manual for Roads and Bridges has also applied in the Republic of Ireland since 2001, with an additional addendum inserted by the National Roads Authority to cater for local conditions in the country. In this form it is known as the NRA Design Manual for Roads and Bridges or NRADMRB. The Irish version incorporates Volumes 1,2, 4-8 and part of Volume 9 of the UK DMRB.[9]

See also

References

  1. Volume Contents and Alphanumeric Index
  2. Introduction to the Design Manual for Roads and Bridges
  3. http://www.highways.gov.uk/business/12081.aspx
  4. http://www.standardsforhighways.co.uk/dmrb/vol2/section2/td1906.pdf
  5. http://www.standardsforhighways.co.uk/ha/standards/tech_info/en_1317_compliance.htm
  6. http://www.standardsforhighways.co.uk
  7. UK Government. "Annex C to Highways England Framework Document: Protocol Agreement" (PDF). Retrieved 19 September 2019.
  8. Please see GG 000 Design Manual for Roads and Bridges: Volume Contents Pages and Alpha-Numeric Index for a full list of published and withdrawn documents since the update work began http://www.standardsforhighways.co.uk/ha/standards/dmrb/vol0/section1.htm
  9. "Archived copy". Archived from the original on 30 April 2008. Retrieved 13 July 2008.CS1 maint: archived copy as title (link)

Highways England

Department for Transport

  • Manual for Streets - replaces Design Bulletin 32 (DB32) which deals with residential and non-trunk road design and layout.
  • Traffic Signs Manual - Complete manual, including Chapter 8 - Roadworks and temporary situations (2006).
  • Traffic Advisory Leaflets - Downloads of advice covering subjects such as provision for pedestrians and cyclists, traffic modelling and calming.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.