Don Bridge
The Don Bridge is a motorway viaduct in South Yorkshire, England.
Don Bridge | |
---|---|
![]() View, looking west, in August 2007 | |
Coordinates | 53.51°N 1.18°W |
OS grid reference | SE547016 |
Carries | ![]() |
Crosses | River Don |
Locale | Sprotbrough, South Yorkshire |
Maintained by | Highways England |
Characteristics | |
Design | Girder bridge |
Material | Reinforced concrete, Steel |
Total length | 760 ft (230 m) |
Height | 70 ft (21 m) |
Longest span | 180 ft (55 m) |
No. of spans | 7 |
No. of lanes | 2 each direction |
History | |
Designer | West Riding County Council |
Construction start | June 1959 |
Opened | 31 July 1961 |
Statistics | |
Daily traffic | ![]() Count point |
Location | |
![]() |
![](../I/South_Yorkshire_UK_location_map.svg.png.webp)
![](../I/Red_pog.svg.png.webp)
History
The line of the fifteen-mile Doncaster By-Pass Motorway was fixed in the spring of 1957.
Design
Each carriageway is carried on a separate structure. Each carriageway is supported by five riveted steel girders. There are 2,225 tons of structural steelwork.
![](../I/A1_Bridge_over_R_Don_-_panoramio.jpg.webp)
Construction
Construction of the Doncaster bypass started on 22 June 1959. There were 28 bridges in the contract for the Doncaster bypass, including five railway bridges.[1][2]
The fabrication of the steelwork for the bridge took place at the West Bromwich Works. The steel superstructure for the bridge was launched from one end of the bridge on an embankment. The steel fabrication was sprayed with zinc.[3] The concrete and steel design is known as composite construction.
The concrete beams were made by Ferro Concrete and Stone Co. (North Notts) Ltd of Retford.
The bypass was built by a consortium including Holland, Hannen & Cubitts, on a £6 million contract.
Structure
The south side of the bridge is in Warmsworth, and the north side is in Sprotbrough and Cusworth. The bridge crosses the Trans Pennine Trail (National Cycle Route 62), which follows the river. It is situated around one mile north of junction 36.
References
- The Surveyor and Municipal and County Engineer, Volume 120, page 960, 1961
- Traffic Engineering & Control, Volume 4, page 455, 1962
- Zinc Handbook: Properties, Processing, and Use In Design, page 320