Dynamic revetment

In 2011, the Surfers' Point working group completed the first phase of the project. Using grant funds from the California Coastal Conservancy and the Federal Highway Administration, the project relocated the bike path and parking lot. To stabilize the area the project constructed a "cobble mattress" on the back beach. Sand was placed in the retreat zone to complement the cobbles and help rebuild the dunes. Later, the project constructed dunes using sand sourced from other beaches with excess sand.[8]

Cape Lookout State Park Oregon January 2020

Following storm damage to Cape Lookout State Park in 1999, it became apparent that some form of shore protection was needed. It was decided that a conventional riprap revetment or seawall would be incompatible with this natural park setting, so the decision was made to construct a cobble berm that resembled the appearance and function of a natural cobble beach, backed by an artificial foredune that was reinforced by a core of sand-filled geotextile bags. Oregon Parks and Recreation Department completed construction of the 300-m long project by December 2000.[9]

State Route 105 North Cove Washington January 2020

In 1996 a rock jetty was constructed to protect State Route 105 near North Cove, which appeared to increase the erosion to the east by redirecting the force of the waves. In response, Washington State Department of Transportation constructed 780 feet of dynamic revetment along the south side of the highway right of way in the fall of 2017. The dynamic revetment has generally performed as intended, with storm erosion transporting the berm material to the toe where it can buffer and dissipate wave energy. However, due to project footprint constraints, the cobble berm was constructed with a narrow width at the western end where wave energy is highest. This segment receives the brunt of waves that refract off adjacent riprap along the highway. Cobble re-nourishment was required several times during the first winter.[10]

North Cove Washington January 2020

In 2016, as a response to what has been called the fastest erosion on the West Coast of the United States, the community of North Cove began placing unsorted pit-run basalt of predominantly cobble size along nearly 2 miles of shoreline to slow the erosion while engineers worked on a more permanent design.[11] Technical assistance and funding were provided by the Pacific County Conservation District. The community nonprofit group Wash Away No More supports the project through fundraising and work parties.[12] Working with regulatory agencies, the principles of Adaptive management and Design with Nature were incorporated into the project to allow for learning and change based on periodic monitoring by Washington State Department of Ecology. As part of the monitoring, PIT tags were placed in individual rocks and their motion tracked over time. It was observed that the rocks that moved farthest weighed between 1 and 10 kg (2.2 and 22 lb) with an intermediate axis of about 10 to 20 cm (4 to 8 in). Angular and rounded rocks appeared to perform equivalently in this environment. [13]