Ellipse Fuji

The Fuji was designed as an intermediate hang glider for local recreational and cross-country flying. Built in four sizes, it is also suitable for adding a motorized harness for powered hang glider operations.[1]

Typical of the series, the Fuji 15 is made from aluminum tubing, with the wing covered in Dacron sailcloth. Its 10 m (32.8 ft) span wing is cable braced from a single kingpost. The nose angle is 122° and the aspect ratio is 6.6:1. The model number indicates the approximate wing area in square metres.[1]

The Fuji 15 is used on the DTA Alizés nanotrike and the Electravia Electro Trike.[1]

Fuji 13

Extra-small sized model with a wing area of 13.5 m² (145 sq ft), wing span of 9.2 m (30.2 ft), aspect ratio of 6.3:1 and a pilot hook-in weight range of 40 to 60 kg (88 to 132 lb).[1]

Fuji 14

Small sized model with a wing area of 14 m² (150 sq ft), wing span of 9.6 m (31.5 ft), aspect ratio of 7.1:1 and a pilot hook-in weight range of 55 to 75 kg (121 to 165 lb).[1]

Fuji 15

Medium sized model with a wing area of 15.5 m² (167 sq ft), wing span of 10 m (32.8 ft), aspect ratio of 6.6:1 and a pilot hook-in weight range of 70 to 85 kg (154 to 187 lb).[1]

Fuji 16

Large sized model with a wing area of 16.5 m² (178 sq ft), wing span of 10 m (32.8 ft), aspect ratio of 6.3:1 and a pilot hook-in weight range of 70 to 100 kg (154 to 220 lb).[1]

Fuji 16 Moteur

Large sized model, structurally reinforced for motorized flight, with a wing area of 16.5 m² (178 sq ft), wing span of 10 m (32.8 ft), aspect ratio of 6.3:1 and a pilot hook-in weight range of 70 to 100 kg (154 to 220 lb).[1]

Data from Bertrand[1]

General characteristics

• Crew: one
• Wingspan: 10 m (32 ft 10 in)
• Wing area: 16.5 m² (178 sq ft)
• Aspect ratio: 6.3