Functionally graded material

In materials science Functionally Graded Materials (FGMs) may be characterized by the variation in composition and structure gradually over volume, resulting in corresponding changes in the properties of the material. The materials can be designed for specific function and applications. Various approaches based on the bulk (particulate processing), preform processing, layer processing and melt processing are used to fabricate the functionally graded materials.

Segmented functionally graded material

History

The concept of FGM was first considered in Japan in 1984 during a space plane project, where a combination of materials used would serve the purpose of a thermal barrier capable of withstanding a surface temperature of 2000 K and a temperature gradient of 1000 k across a 10 mm section.[1] In recent years this concept has become more popular in Europe, particularly in Germany. A transregional collaborative research center (SFB Transregio) is funded since 2006 in order to exploit the potential of grading monomaterials, such as steel, aluminium and polypropylen, by using thermomechanically coupled manufacturing processes.[2]

General information

The basic structural units of FGMs are elements or material ingredients represented by maxel. The term maxel was introduced in 2005 by Rajeev Dwivedi and Radovan Kovacevic at Research Center for Advanced Manufacturing (RCAM).[3] The attributes of maxel include the location and volume fraction of individual material components.

A maxel is also used in the context of the additive manufacturing processes (such as stereolithography, selective laser sintering, fused deposition modeling, etc.) to describe a physical voxel (a portmanteau of the words 'volume' and 'element'), which defines the build resolution of either a rapid prototyping or rapid manufacturing process, or the resolution of a design produced by such fabrication means.

Applications

There are many areas of application for FGM. The concept is to make a composite material by varying the microstructure from one material to another material with a specific gradient. This enables the material to have the best of both materials. If it is for thermal, or corrosive resistance or malleability and toughness both strengths of the material may be used to avoid corrosion, fatigue, fracture and stress corrosion cracking.

The transition between the two materials can usually be approximated by means of a power series. The aircraft and aerospace industry and the computer circuit industry are very interested in the possibility of materials that can withstand very high thermal gradients.[4] This is normally achieved by using a ceramic layer connected with a metallic layer.

The Air Vehicles Directorate has conducted a Quasi-static bending test results of functionally graded titanium/titanium boride test specimens which can be seen below.[5] The test correlated to the finite element analysis (FEA) using a quadrilateral mesh with each element having its own structural and thermal properties.

Advanced Materials and Processes Strategic Research Programme (AMPSRA) have done analysis on producing a thermal barrier coating using Zr02 and NiCoCrAlY. Their results have proved successful but no results of the analytical model are published.

The rendition of the term that relates to the additive fabrication processes has its origins at the RMRG (Rapid Manufacturing Research Group) at Loughborough University in the United Kingdom. The term forms a part of a descriptive taxonomy of terms relating directly to various particulars relating to the additive CAD-CAM manufacturing processes, originally established as a part of the research conducted by architect Thomas Modeen into the application of the aforementioned techniques in the context of architecture.

Gradient of elastic modulus essentially changes the fracture toughness of adhesive contacts.[6]

Modeling and simulation

Functionally graded armor tile after ballistic testing (front and back)

Numerical methods have been developed for modelling the mechanical response of FGMs, with the finite element method being the most popular one. Initially, the variation of material properties was introduced by means of rows (or columns) of homogeneous elements, leading to a discontinuous step-type variation in the mechanical properties.[7] Later, Santare and Lambros [8] developed functionally graded finite elements, where the mechanical property variation takes place at the element level. Martínez-Pañeda and Gallego extended this approach to commercial finite element software.[9] Contact properties of FGM can be simulated using the Boundary Element Method (which can be applied both to non-adhesive and adhesive contacts).[10] Molecular dynamics simulation has also been implemented to study functionally graded materials. M. Islam [11] studied the mechanical and vibrational properties of functionally graded Cu-Ni nanowires using molecular dynamics simulation.

Mechanics of functionally graded material structures was considered by many authors.[12][13][14][15]

References

  1. "Functionally Graded Materials (FGM) and Their Production Methods". Azom.com. 2002-08-22. Retrieved 2012-09-13.
  2. "Home". Transregio-30.com. Retrieved 2012-09-13.
  3. R Dwivedi1 S Zekovic1 R Kovacevic1 (2006-10-01). "Field feature detection and morphing-based process planning for fabrication of geometries and composition control for functionally graded materials". Pib.sagepub.com. Retrieved 2012-09-13.
  4. http://www.grc.nasa.gov/WWW/RT/RT2000/images/5920arnold3.jpg
  5. "Archived copy". Archived from the original on 2011-06-05. Retrieved 2008-04-27.CS1 maint: archived copy as title (link)
  6. Popov, Valentin L.; Pohrt, Roman; Li, Qiang (2017-09-01). "Strength of adhesive contacts: Influence of contact geometry and material gradients". Friction. 5 (3): 308–325. doi:10.1007/s40544-017-0177-3. ISSN 2223-7690.
  7. Bao, G.; Wang, L. (1995). "Multiple cracking in functionally graded ceramic/metal coatings". International Journal of Solids and Structures. 32 (19): 2853–2871. doi:10.1016/0020-7683(94)00267-Z.
  8. Santare, M.H.; Lambros, J. (2000). "Use of graded finite elements to model the behaviour of nonhomogeneous materials". Journal of Applied Mechanics. 67 (4): 819–822. Bibcode:2000JAM....67..819S. doi:10.1115/1.1328089.
  9. Martínez-Pañeda, E.; Gallego, R. (2015). "Numerical analysis of quasi-static fracture in functionally graded materials". International Journal of Mechanics and Materials in Design. 11 (4): 405–424. arXiv:1711.00077. doi:10.1007/s10999-014-9265-y. S2CID 54587103.
  10. Li, Qiang; Popov, Valentin L. (2017-08-09). "Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials". Computational Mechanics. 61 (3): 319–329. arXiv:1612.08395. Bibcode:2018CompM..61..319L. doi:10.1007/s00466-017-1461-9. ISSN 0178-7675. S2CID 119073298.
  11. Islam, Mahmudul; Hoque Thakur, Md Shajedul; Mojumder, Satyajit; Al Amin, Abdullah; Islam, Md Mahbubul (July 12, 2020). "Mechanical and Vibrational Characteristics of Functionally Graded Cu-Ni Nanowire: A Molecular Dynamics Study". Composites Part B: Engineering. 198: 108212. arXiv:1911.07131. doi:10.1016/j.compositesb.2020.108212. S2CID 208139256.
  12. Elishakoff,I., Pentaras, D., Gentilini,C., Mechanics of Functionally Graded Material Structures, World Scientific/Imperial College Press, Singapore; pp. 323, ISBN 978-981-4656-58-0, 2015
  13. Aydoglu M., Maróti, G.,Elishakoff, I., A Note on Semi-Inverse Method for Buckling of Axially Functionally Graded Beams, Journal of Reinforced Plastics & Composites, Vol.32(7),511-512, 2013
  14. Castellazzi, G., Gentilini,C., Krysl,P., Elishakoff, I., Static Analysis of Functionally Graded Plates using a Nodal Integrated Finite Element Approach, Composite Structures, Vol.103,197-200, 2013
  15. Elishakoff, I., Zaza, N., Curtin, J., Hashemi, J., Apparently First Closed-Form Solution for Vibration of Functionally Graded Rotating Beams”, AIAA Journal, Vol. 52(11), 2587-2593, 2014
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.