GeForce 800M series

First generation Maxwell GM107/GM108 provides few consumer-facing additional features; Nvidia instead focused on power efficiency. Nvidia's video encoder, NVENC, is 1.5 to 2 times faster than on Kepler-based GPUs meaning it can encode video at 6 to 8 times playback speed.[5] Nvidia also claims an 8 to 10 times performance increase in PureVideo Feature Set E video decoding due to the video decoder cache paired with increases in memory efficiency. However, HEVC is not supported for full hardware decoding, relying on a mix of hardware and software decoding.[5] When decoding video, a new low power state "GC5" is used on Maxwell GPUs to conserve power.[5]

Nvidia increased the amount of L2 cache on GM107 to 2 MB, up from 256 KB on GK107, reducing the memory bandwidth needed. Accordingly, Nvidia cut the memory bus to 128 bit on GM107 from 192 bit on GK106, further saving power.[5] Nvidia also changed the streaming multiprocessor design from that of Kepler (SMX), naming it SMM. The layout of SMM units is partitioned so that each of the four warp schedulers controls isolated FP32 CUDA cores, load/store units and special function units, unlike Kepler, where the warp schedulers share the resources. Texture units and FP64 CUDA cores are still shared.[5] SMM allows for a finer-grain allocation of resources than SMX, saving power when the workload isn't optimal for shared resources. Nvidia claims a 128 CUDA core SMM has 90% of the performance of a 192 CUDA core SMX.[5]

GM107/GM108 supports CUDA Compute Capability 5.0 compared to 3.5 on GK110/GK208 GPUs and 3.0 on GK10x GPUs. Dynamic Parallelism and HyperQ, two features in GK110/GK208 GPUs, are also supported across the entire Maxwell product line.

Maxwell provides native shared memory atomic operations for 32-bit integers and native shared memory 32-bit and 64-bit compare-and-swap (CAS), which can be used to implement other atomic functions.

Maxwell supports DirectX 12.[9]

Nvidia has announced that the company skipped the GeForce 800 series for desktop graphics cards, most likely because the GTX 800M series consists of high-end Kepler and low-end Maxwell based components. Instead, Nvidia had announced that the newly renamed GeForce GTX 980 and GTX 970 will be introduced formally on September 19, 2014.[2]

The GeForce 800M Series is designed for notebooks. The processing power is obtained by multiplying shader clock speed, the number of cores and how many instructions the cores are capable of performing per cycle. Note that all GK104 based GPUs are using the older Kepler Architecture and the 820M uses GF117 cores based on the Fermi Architecture.

• ¹ Unified Shaders : Texture mapping units : Render output units