Gobo (recording)

Gobo is a sound recording term for a movable acoustic isolation panel. In typical use, a recording engineer might put a gobo between two musicians to increase the isolation of their microphones from each other.

The origin of the term "gobo" is obscure, but is most likely short for "go-between." The gobo was invented by Charles Norris Hoyle, and was originally a product of TayTrix.

Use

Gobo panels control the acoustical properties of a room by absorbing and diffusing sound waves. Uses include treating recording and mixing areas for unwanted reverberation, or to separate two or more musicians so they can play close to each other with separate microphones. Gobo panels are typically constructed to accommodate portability and storage, an advantage over more permanent acoustical room treatments.

Gobo panels in a recording studio

Construction

A gobo typically consists of a wooden panel covered with foam, carpeting or other materials with sound damping properties. A gobo can rest directly on the floor or be raised on adjustable legs.

Manufacturers

  • Clearsonic[1]
  • Forward Acoustics[2]
  • Primacousics[3]
  • Taytrix[4]
  • Yukon Acoustics[5]

References

  1. "High Quality Drum Shields & Acoustic Baffles - ClearSonic Mfg". ClearSonic.
  2. "Forward Acoustics Inc". Forward Acoustics Inc.
  3. "Studio Tools - Primacoustic". www.primacoustic.com.
  4. "Taytrix". www.taytrix.com.
  5. "Diffusers". Yukon Acoustics. Archived from the original on 1 December 2017. Retrieved 26 November 2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.