Heat index

The heat index was developed in 1979 by Robert G. Steadman.[1][2] Like the wind chill index, the heat index contains assumptions about the human body mass and height, clothing, amount of physical activity, individual heat tolerance, sunlight and ultraviolet radiation exposure, and the wind speed. Significant deviations from these will result in heat index values which do not accurately reflect the perceived temperature.[3]

In Canada, the similar humidex (a Canadian innovation introduced in 1965)[4] is used in place of the heat index. While both the humidex and the heat index are calculated using dew point, the humidex uses a dew point of 7 °C (45 °F) as a base, whereas the heat index uses a dew point base of 14 °C (57 °F). Further, the heat index uses heat balance equations which account for many variables other than vapor pressure, which is used exclusively in the humidex calculation. A joint committee formed by the United States and Canada to resolve differences has since been disbanded.

The heat index of a given combination of (dry-bulb) temperature and humidity is defined as the dry-bulb temperature which would feel the same if the water vapor pressure were 1.6 kPa. Quoting Steadman, "Thus, for instance, an apparent temperature of 24 °C (75 °F) refers to the same level of sultriness, and the same clothing requirements, as a dry-bulb temperature of 24 °C (75 °F) with a vapor pressure of 1.6 kPa."[1]

This vapor pressure corresponds for example to an air temperature of 29 °C (84 °F) and relative humidity of 40% in the sea-level psychrometric chart, and in Steadman's table at 40% RH the apparent temperature is equal to the true temperature between 26–31 °C (79–88 °F). At standard atmospheric pressure (101.325 kPa), this baseline also corresponds to a dew point of 14 °C (57 °F) and a mixing ratio of 0.01 (10 g of water vapor per kilogram of dry air).[1]

A given value of relative humidity causes larger increases in the heat index at higher temperatures. For example, at approximately 27 °C (81 °F), the heat index will agree with the actual temperature if the relative humidity is 45%, but at 43 °C (109 °F), any relative-humidity reading above 18% will make the heat index higher than 43 °C.[5]

It has been suggested that the equation described is valid only if the temperature is 27 °C (81 °F) or more.[6] The relative humidity threshold, below which a heat index calculation will return a number equal to or lower than the air temperature (a lower heat index is generally considered invalid), varies with temperature and is not linear. The threshold is commonly set at an arbitrary 40%.[5]

The heat index and its counterpart the humidex both take into account only two variables, shade temperature and atmospheric moisture (humidity), thus providing only a limited estimate of thermal comfort. Additional factors such as wind, sunshine and individual clothing choices also affect perceived temperature; these factors are parameterized as constants in the heat index formula. Wind, for example, is assumed to be 5 knots (9.3 km/h).[5] Wind passing over wet or sweaty skin causes evaporation and a wind chill effect that the heat index does not measure. The other major factor is sunshine; standing in direct sunlight can add up to 15 °F (8.3 °C) to the apparent heat compared to shade.[7] There have been attempts to create a universal apparent temperature, such as the wet-bulb globe temperature, "relative outdoor temperature", "feels like", or the proprietary "RealFeel".

Outdoors in open conditions, as the relative humidity increases, first haze and ultimately a thicker cloud cover develops, reducing the amount of direct sunlight reaching the surface. Thus, there is an inverse relationship between maximum potential temperature and maximum potential relative humidity. Because of this factor, it was once believed that the highest heat index reading actually attainable anywhere on Earth was approximately 71 °C (160 °F). However, in Dhahran, Saudi Arabia on July 8, 2003, the dew point was 35 °C (95 °F) while the temperature was 42 °C (108 °F), resulting in a heat index of 78 °C (172 °F).[8]

The human body requires evaporative cooling to prevent overheating. Wet-bulb temperature, and Wet Bulb Globe Temperature are used to determine the ability of a body to eliminate excess heat. A sustained wet-bulb temperature of about 35 °C (95 °F) can be fatal to healthy people; at this temperature our bodies switch from shedding heat to the environment, to gaining heat from it.[9] Thus a wet bulb temperature of 35 °C (95 °F) is the threshold beyond which the body is no longer able to adequately cool itself.[10]

The table below is from the U.S. National Oceanic and Atmospheric Administration. The columns begin at 80 °F (27 °C), but there is also a heat index effect at 79 °F (26 °C) and similar temperatures when there is high humidity.

For example, if the air temperature is 96 °F (36 °C) and the relative humidity is 65%, the heat index is 49 °C (120 °F)

Exposure to full sunshine can increase heat index values by up to 8 °C (14 °F).[11]

Comparison of NWS heat index values (circles) with the formula approximation (curves). In the SVG file, hover over a graph to highlight it.

There are many formulas devised to approximate the original tables by Steadman. Anderson et al. (2013),[12] NWS (2011), Jonson and Long (2004), and Schoen (2005) have lesser residuals in this order. The former two are a set of polynomials, but the third one is by a single formula with exponential functions.

The formula below approximates the heat index in degrees Fahrenheit, to within ±1.3 °F (0.7 °C). It is the result of a multivariate fit (temperature equal to or greater than 80 °F (27 °C) and relative humidity equal to or greater than 40%) to a model of the human body.[1][13] This equation reproduces the above NOAA National Weather Service table (except the values at 90 °F (32 °C) & 45%/70% relative humidity vary unrounded by less than ±1, respectively).

${\displaystyle \mathrm {HI} =c_{1}+c_{2}T+c_{3}R+c_{4}TR+c_{5}T^{2}+c_{6}R^{2}+c_{7}T^{2}R+c_{8}TR^{2}+c_{9}T^{2}R^{2}}$

where

HI = heat index (in degrees Fahrenheit)

T = ambient dry-bulb temperature (in degrees Fahrenheit)

R = relative humidity (percentage value between 0 and 100)

${\displaystyle {\begin{aligned}c_{1}&=-42.379,&c_{2}&=2.049\,015\,23,&c_{3}&=10.143\,331\,27,\\c_{4}&=-0.224\,755\,41,&c_{5}&=-6.837\,83\times 10^{-3},&c_{6}&=-5.481\,717\times 10^{-2},\\c_{7}&=1.228\,74\times 10^{-3},&c_{8}&=8.5282\times 10^{-4},&c_{9}&=-1.99\times 10^{-6}.\end{aligned}}}$

The following coefficients can be used to determine the heat index when the temperature is given in degrees Celsius, where

HI = heat index (in degrees Celsius)

T = ambient dry-bulb temperature (in degrees Celsius)

R = relative humidity (percentage value between 0 and 100)

• c₁ = -8.78469475556
• c₂ = 1.61139411
• c₃ = 2.33854883889
• c₄ = -0.14611605
• c₅ = -0.012308094
• c₆ = -0.0164248277778
• c₇ = 0.002211732
• c₈ = 0.00072546
• c₉ = -0.000003582

An alternative set of constants for this equation that is within ±3 °F (1.7 °C) of the NWS master table for all humidities from 0 to 80% and all temperatures between 70 and 115 °F (21–46 °C) and all heat indices below 150 °F (66 °C) is:

${\displaystyle {\begin{aligned}c_{1}&=0.363\,445\,176,&c_{2}&=0.988\,622\,465,&c_{3}&=4.777\,114\,035,\\c_{4}&=-0.114\,037\,667,&c_{5}&=-8.502\,08\times 10^{-4},&c_{6}&=-2.071\,6198\times 10^{-2},\\c_{7}&=6.876\,78\times 10^{-4},&c_{8}&=2.749\,54\times 10^{-4},&c_{9}&=0.\end{aligned}}}$

A further alternate is this:[14]

${\displaystyle {\begin{aligned}\mathrm {HI} &=c_{1}+c_{2}T+c_{3}R+c_{4}TR+c_{5}T^{2}+c_{6}R^{2}+c_{7}T^{2}R+c_{8}TR^{2}+c_{9}T^{2}R^{2}+\\&\quad {}+c_{10}T^{3}+c_{11}R^{3}+c_{12}T^{3}R+c_{13}TR^{3}+c_{14}T^{3}R^{2}+c_{15}T^{2}R^{3}+c_{16}T^{3}R^{3}\end{aligned}}}$

where

${\displaystyle {\begin{aligned}c_{1}&=16.923,&c_{2}&=0.185\,212,&c_{3}&=5.379\,41,&c_{4}&=-0.100\,254,\\c_{5}&=9.416\,95\times 10^{-3},&c_{6}&=7.288\,98\times 10^{-3},&c_{7}&=3.453\,72\times 10^{-4},&c_{8}&=-8.149\,71\times 10^{-4},\\c_{9}&=1.021\,02\times 10^{-5},&c_{10}&=-3.8646\times 10^{-5},&c_{11}&=2.915\,83\times 10^{-5},&c_{12}&=1.427\,21\times 10^{-6},\\c_{13}&=1.974\,83\times 10^{-7},&c_{14}&=-2.184\,29\times 10^{-8},&c_{15}&=8.432\,96\times 10^{-10},&c_{16}&=-4.819\,75\times 10^{-11}.\end{aligned}}}$

For example, using this last formula, with temperature 90 °F (32 °C) and relative humidity (RH) of 85%, the result would be: Heat index for 90 °F, RH 85% = 114.9.

• Apparent temperature
• Thermal comfort § Interplay of temperature and humidity
• Humidex
• Wet-bulb temperature
• Wind chill

• Description of wind chill & apparent temperature Formulae in metric units
• Heat Index Calculator Calculates both °F and °C
• Current map of global heat index values