Kinematic similarity

In the field of fluid mechanics, kinematic similarity means, when the velocity at any point in the model flow is proportional by a constant scale factor to the velocity at the homologous point in the prototype flow, while considering it is maintaining the same flow streamline shape.[1] This is one of the three (Geometric Similarity, Dynamic Similarity and Kinematic Similarity) necessary conditions for complete similarities between a model and a prototype. The kinematic similarity is the similarity of motion of the fluid. Since motions can be expressed with distance and time, it implies the similarity of lengths (i.e. geometrical similarity) and, in addition, a similarity of the time interval.[2] To achieve kinematic similarity in a scaled model, dimensionless numbers in fluid dynamics come into consideration. For example, Reynolds number of the model and the prototype must match. There are other dimensionless numbers that will also come into consideration, such as Womersley number[3]

Example

Assume, we need to make a scaled up model of coronary artery with kinematic similarity.

ParameterVariableValueUnit
Coronary Artery DiameterD13mm
Model Artery DiameterD230mm
Velocity in Arteryv115cm/s
Kinematic Viscosity (Blood)ʋ13.2cP

Reynolds Number,
Re = ρvl/μ = vl/ʋ

Where,
ρ = Density of the fluid (SI units: kg/m3)
v = Velocity of the fluid (SI units: m/s)
l = Characteristic length or diameter (SI units: m)
μ = Dynamic viscosity (SI units: N s/m2)
ʋ = Kinematic viscosity (SI units: m2/s)

Now, there are few ways to maintain kinematic similarity. To keep the Reynolds number same, the scaled-up model can use a different fluid with different viscosity or density. We can also change the velocity of the fluid to maintain the same dynamic characteristics.

So, the above equation can be written for artery as, Re (artery) = ρ1v1l1/μ1 = v1l1/ʋ1

And for the scaled-up model, Re (model) = ρ2v2l2/μ2 = v2l2/ʋ2

At the condition of Kinematic Similarity, Re (model) = Re (artery)

That means, ρ1v1l1/μ1 = ρ2v2l2/μ2

or, v1l1/ʋ1 = v2l2/ʋ2

Substituting variables by provided values will provide important characteristics data for the fluid and flow characteristics for the scaled-up model. A similar approach can be taken for the scaled-down model (i.e. oil refinery scaled-down model) as well.

See also

References
  1. Çengel, Y.A. and Cimbala, J.M. Fluid Mechanics: Fundamentals and Applications. Boston: McGraw Hill, 2010, pp. 291-292.
  2. Zohuri, B. Dimensional analysis and self-similarity methods for engineers and scientists. Dimensional Analysis and Self-Similarity Methods for Engineers and Scientists (2015). doi:10.1007/978-3-319-13476-5
  3. Lee Waite, Ph.D., P.E.; Jerry Fine, Ph.D.: Applied Biofluid Mechanics, Second Edition. Common Dimensionless Parameters in Fluid Mechanics, Chapter (McGraw-Hill Professional, 2017), AccessEngineering
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.